Skip navigation.
Home
The QNX Community Portal

View topic - where can I get SSH server to qnx4

where can I get SSH server to qnx4

This is where you can ask a software to be ported or written for QNX. You can also request to buy/sell second hand software.

where can I get SSH server to qnx4

Postby adrianoo » Thu Nov 27, 2003 4:32 pm

Hi,

Where can I get SSH server to QNX 4?

I found it in http://dora.eeap.cwru.edu/login/#Access%20from%20QNX
but I can't untared the file ssh-1.2.26.tar.bz2

I suscessful installed bzip2.

Some Idea?

best Regards
Adriano Oliveira
Brazil
adrianoo
New Member
 
Posts: 4
Joined: Thu Nov 27, 2003 4:25 pm

Postby noc » Thu Nov 27, 2003 10:24 pm

old version can be found at JC's site:
http://www.jcmichot.usenet-fr.net/gnu/
all software there are compressed using bz2, so you will need to download the first file bzip2.tar.gz and install it. You can then uncompress the bz2 files with bunzip2 command, or you can do it in one step with
bzip2 -cd ssh-1.2.26.tar.bz2 | tar xvf -

btw, verify the cksum after you download the files to make sure they are not corrupted.
noc
Senior Member
 
Posts: 1634
Joined: Sat Jul 06, 2002 4:34 am

Postby adrianoo » Thu Dec 04, 2003 1:17 pm

Hi noc,

I got install bzip2.
Now I'm need install gcc 2.8.1 for qnx4, but link http://www.jcmichot.usenet-fr.net/gcc/ was not found to gcc download.

do u know other place where can I find gcc 2.8.1 for qnx?

best Regars
Adriano Silva
adrianoo
New Member
 
Posts: 4
Joined: Thu Nov 27, 2003 4:25 pm

Postby noc » Thu Dec 04, 2003 3:44 pm

just download EGCS 1.1.2 from there. It includes the newer GCC as well as the old 2.8.1
noc
Senior Member
 
Posts: 1634
Joined: Sat Jul 06, 2002 4:34 am

Postby adrianoo » Fri Dec 05, 2003 12:57 pm

Hi noc,

there are a warning message.

**** WARNING ****
YOU MUST HAVE Watcom 10.6 allready installed to be able
to use EGCS or GNU C, C++, Pascal compilers.

Version 2.2 contain, Qnx4.25 ELF gcc/egcs compilers.

How can I see if I have Watcom 10.6 allready installed
at HPUX I use swlist command to list aplications already installed.
at SOLARIS I use pkginfo command to list application already installed
and at QNX what command I must use?


2/# uname -a
QNX 2 N 425 PCI 32

thanks
adrianoo
New Member
 
Posts: 4
Joined: Thu Nov 27, 2003 4:25 pm

Postby noc » Fri Dec 05, 2003 4:05 pm

ls /etc/version
and see if you have wcc (watcom c compiler) and wpp (watcom c++ compiler) in there. If so, cat wcc and wpp to check out the versions.
noc
Senior Member
 
Posts: 1634
Joined: Sat Jul 06, 2002 4:34 am

Postby adrianoo » Mon Dec 08, 2003 4:24 pm

Mr Noc,

now I'm need install a wcc or a wpp complier.
Do you know if this software are free?
If not where can I get it?

thanks
Adriano Silva
adrianoo
New Member
 
Posts: 4
Joined: Thu Nov 27, 2003 4:25 pm

Postby noc » Mon Dec 08, 2003 4:35 pm

Based on http://www.schoenbrun.com/mba/faq.htm#L21 , the Watcom c compiler (wcc) costs US$845 and Watcom c++ compiler (wpp) costs $195. So you will need to spend $1040 for wcc/wpp. Where to get it? http://www.qnx.com/howtobuy.html
noc
Senior Member
 
Posts: 1634
Joined: Sat Jul 06, 2002 4:34 am

Postby akqj1098 » Wed Dec 29, 2004 6:31 am

noc wrote:ls /etc/version
and see if you have wcc (watcom c compiler) and wpp (watcom c++ compiler) in there. If so, cat wcc and wpp to check out the versions.


hi Noc,
i am QNX4.25 new user
How to setup SSH on machines
thks :wink:
akqj1098
Active Member
 
Posts: 11
Joined: Tue Dec 28, 2004 1:27 am

Postby noc » Wed Dec 29, 2004 7:14 am

If you don't mind the old ssh1, check out
http://www.openqnx.com/PNphpBB2-viewtopic-t3231-.html

For ssh2, you should either go with the commercial ssh from ssh.com or the free openssh. I may release a pre-compiled free openssh binary for QNX4 some day.
noc
Senior Member
 
Posts: 1634
Joined: Sat Jul 06, 2002 4:34 am

Postby akqj1098 » Wed Dec 29, 2004 3:01 pm

noc wrote:If you don't mind the old ssh1, check out
http://www.openqnx.com/PNphpBB2-viewtopic-t3231-.html

For ssh2, you should either go with the commercial ssh from ssh.com or the free openssh. I may release a pre-compiled free openssh binary for QNX4 some day.


sorry Noc,
I have been get OpenSSH,
how to setup the ssh on QNX4.25
any document...??

thk u
akqj1098
Active Member
 
Posts: 11
Joined: Tue Dec 28, 2004 1:27 am

Postby noc » Wed Dec 29, 2004 5:57 pm

akqj1098 wrote:
sorry Noc,
I have been get OpenSSH,
how to setup the ssh on QNX4.25
any document...??

thk u


That's cool. The hardest part is the compilation/porting.
If you already have it ready and only need help on setup, it is much easier. Actually, it is no different from setting up in other Unix. The document on www.openssh.com should apply. Here is a setup script I got from Linux. Just run it and you will be set.

Code: Select all

#!/bin/sh
if [ ! -d /etc/ssh ]; then
    /bin/mkdir /etc/ssh
fi
if [ -f "/etc/ssh/ssh_host_key" ] ; then
    echo "/etc/ssh/ssh_host_key already exists, skipping."
else
    /usr/local/bin/ssh-keygen -t rsa1 -f /etc/ssh/ssh_host_key -N ""
fi
if [ -f /etc/ssh/ssh_host_dsa_key ] ; then
    echo "/etc/ssh/ssh_host_dsa_key already exists, skipping."
else
    /usr/local/bin/ssh-keygen -t dsa -f /etc/ssh/ssh_host_dsa_key -N ""
fi
if [ -f /etc/ssh/ssh_host_rsa_key ] ; then
    echo "/etc/ssh/ssh_host_rsa_key already exists, skipping."
else
   /usr/local/bin/ssh-keygen -t rsa -f /etc/ssh/ssh_host_rsa_key -N ""
fi

noc
Senior Member
 
Posts: 1634
Joined: Sat Jul 06, 2002 4:34 am

Postby akqj1098 » Thu Dec 30, 2004 1:30 am

noc wrote:
akqj1098 wrote:
sorry Noc,
I have been get OpenSSH,
how to setup the ssh on QNX4.25
any document...??

thk u


That's cool. The hardest part is the compilation/porting.
If you already have it ready and only need help on setup, it is much easier. Actually, it is no different from setting up in other Unix. The document on www.openssh.com should apply. Here is a setup script I got from Linux. Just run it and you will be set.

Code: Select all

#!/bin/sh
if [ ! -d /etc/ssh ]; then
    /bin/mkdir /etc/ssh
fi
if [ -f "/etc/ssh/ssh_host_key" ] ; then
    echo "/etc/ssh/ssh_host_key already exists, skipping."
else
    /usr/local/bin/ssh-keygen -t rsa1 -f /etc/ssh/ssh_host_key -N ""
fi
if [ -f /etc/ssh/ssh_host_dsa_key ] ; then
    echo "/etc/ssh/ssh_host_dsa_key already exists, skipping."
else
    /usr/local/bin/ssh-keygen -t dsa -f /etc/ssh/ssh_host_dsa_key -N ""
fi
if [ -f /etc/ssh/ssh_host_rsa_key ] ; then
    echo "/etc/ssh/ssh_host_rsa_key already exists, skipping."
else
   /usr/local/bin/ssh-keygen -t rsa -f /etc/ssh/ssh_host_rsa_key -N ""
fi



very nice to know you, Noc,

i am from Taiwan(R.O.C)
and i cann't to write good english
(sorry)
so, i usually need very clear description .

now, i already got install bzip2
but i donn't know
how to compile the SSH ?

thank your help very much
akqj1098
Active Member
 
Posts: 11
Joined: Tue Dec 28, 2004 1:27 am

Postby noc » Sun Jan 02, 2005 8:34 pm

Compiling openssh on QNX 4 is not a trivial task.
If you don't already have the pre-compiled binary, I would suggest you just install ssh1 from Tony: http://www.openqnx.com/PNphpBB2-viewtopic-t3231-.html

BTW, there is a Chinese QNX site at http://www.openqnx.com/chinese

PS: If you insist on playing with openssh, Andreas' post below will be a good start:
http://www.openqnx.com/newsgroups/viewtopic.php?t=8910
Last edited by noc on Tue Feb 19, 2008 11:34 pm, edited 1 time in total.
noc
Senior Member
 
Posts: 1634
Joined: Sat Jul 06, 2002 4:34 am

Postby akqj1098 » Tue Jan 04, 2005 2:17 am

Dear Noc,
What a good heart you have!
Thanks for your kind effort help.

noc wrote:Compiling openssh on QNX 4 is not a trivial task.
If you don't already have the pre-compiled binary, I would suggest you just install ssh1 from Tony: http://www.openqnx.com/PNphpBB2-viewtopic-t3231-.html

BTW, there is a Chinese QNX site at http://www.chinartos.com

PS: If you insist on playing with openssh, Andreas' post below will be a good start:
http://www.openqnx.com/newsgroups/viewtopic.php?t=8910
akqj1098
Active Member
 
Posts: 11
Joined: Tue Dec 28, 2004 1:27 am

Next

Return to Request Software

Who is online

Users browsing this forum: No registered users and 1 guest