Skip navigation.
Home
The QNX Community Portal

View topic - QNX Porting problem on ARM926EJ-S-based SoC platform

QNX Porting problem on ARM926EJ-S-based SoC platform

This forum links to the openqnx mailing list hosted on sourceforge. It is primarily for discussion of the ports done by the openqnx project. The forum is set to read-only. Please subscribe to the mailing list http://lists.sourceforge.net/lists/list ... -developer if you want to post.

QNX Porting problem on ARM926EJ-S-based SoC platform

Postby Pusik Park » Mon Feb 18, 2008 1:22 pm

Dear Everyone.



I solved callout_debug_xxxxx.S and I looked at another kernel debugging
message like the below log.



What happens?

Unfortunately, I don't know where is the problem ?



Please help me.



Best regards.



Pusik.





Brief description of my CPU and Board.



CPU Core : ARM926EJ-S 32-bit RISC

CPU Cache: 16KB I-Cache, 16KB D-Cache

CPU Clock : 141MHz

CPU interrupt sources : 29 ea

Timers : 32-bit timer 2 ea

NOR Flash : 1MB (base address = 0x0000_0000)

SDRAM : 32MB (base address = 0x1000_0000)





----------------------------------------------------------------------------
---------------------------------

QNX IPL for JAGUAR



Commands:

s: load image serially using sendnto

f: load image from flash

ipl> send image now...

Download complete, calling image_scan...

Found image, calling image_setup...

image_scan return : 10400000

signature : 0x00FF7EEB

version : 0x00000001

flags1 : 0x00000001

flags2 : 0x00000000

header_size : 0x00000100

machine : 0x00000028

startup_vaddr : 0x10801B80

paddr_bias : 0x00000000

image_paddr : 0x10800000

ram_paddr : 0x10800000

ram_size : 0x0018C004

startup_size : 0x00021108

stored_size : 0x0018C004

imagefs_paddr : 0x00000000

imagefs_size : 0x0016AEFC

preboot_size : 0x00000000

zero0 : 0x00000000

image setup complete, calling image_start...

init_raminfo

add_ram start=0x10000000, size=0x02000000

lsp.asinfo.size=0x00000000

1

as_add_containing start=268435456, end=301989887, attr=00000007, name=ram,
conta

iner=memory

2

add_mem(10000000,02000000)

alloc_ram(0x10821108,0x0016aefc,0x00000001) => 0x10821108

add_mem(1098c004,01673ffc)

find_ram(size=0x00008000, align=0x00001000, colour=0x00000000,
mask=0x00000000)

Addr=0x10000000

jaguar2_cpu_freq: F_in=32768000

alloc_ram(0x10800000,0x0018c004,0x00000001) => 0x10800000

alloc_ram(0xffffffff,0x00004000,0x00004000) => find_ram(size=0x00004000,
align=0x00004000, colour=0x00000000, mask=0x00000000)

Addr=0x10008000

add_mem(1000c000,007f4000)

alloc_ram(0xffffffff,0x00001000,0x00001000) => find_ram(size=0x00001000,
align=0x00001000, colour=0x00000000, mask=0x00000000)

Addr=0x1000c000

alloc_ram(0xffffffff,0x00001000,0x00001000) => find_ram(size=0x00001000,
align=0x00001000, colour=0x00000000, mask=0x00000000)

Addr=0x1000d000

init_intrinfo

add_interrupt_array size=52, incr=52

add_interrupt

init_qtime

init_cpuinfo

Dcache: 512x32 WB

Icache: 512x32

arm926 rev 5 141MHz

alloc_ram(0xffffffff,0x00001000,0x00001000) => find_ram(size=0x00001000,
align=0x00001000, colour=0x00000000, mask=0x00000000)

Addr=0x1000e000

alloc_ram(0xffffffff,0x00001000,0x00001000) => find_ram(size=0x00001000,
align=0x00001000, colour=0x00000000, mask=0x00000000)

Addr=0x1000f000

init_hwinfo

add_typed_string 0x00000005=jaguar2

init_system_private

add_typed_string 0x00000002=localhost

load_ifs done

as_find memory done

as_add imagefs done

as_add startup done

as_add bootram done

Find boot process 0 (inode 3758096386)

alloc_ram(0xffffffff,0x00001000,0x00001000) => find_ram(size=0x00001000,
align=0x00001000, colour=0x00000000, mask=0x00000000)

Addr=0x10010000

alloc_ram(0xffffffff,0x00001000,0x00001000) => find_ram(size=0x00001000,
align=0x00001000, colour=0x00000000, mask=0x00000000)

Addr=0x10011000

Load boot process '/proc/boot/procnto-instr'

boot_pgm[276963328].base=0x100001f4

boot_pgm[4261570292].entry=0x00000000

memmove done

option: c

reserved_size=0

smp_hook_rtn done

mdriver_hook done

as_add_containing start=268435456, end=268468223, attr=00000007,
name=sysram, container=ram

as_add_containing start=268509184, end=276824063, attr=00000007,
name=sysram, container=ram

as_add_containing start=278446084, end=301989887, attr=00000007,
name=sysram, container=ram

add_system done

alloc_syspage_memory

output_callouts(1) done

callouts_size=0x00000290

spsize=0x00000790

cpu_alloc_syspage_memory cpupagep=0x00000007, syspagep=0x00000000,
spsize=0x00000790

alloc_ram(addr=0xffffffff, size=0x000007b0, align=0x00001000)

alloc_ram(0xffffffff,0x000007b0,0x00001000) => find_ram(size=0x000007b0,
align=0x00001000, colour=0x00000000, mask=0x00000000)

Addr=0x10012000

cpu_alloc_syspage_memory cpupage_paddr=0x10012790, syspage_paddr=0x10012000

INIT_ENTRY(system_private) done

INIT_ENTRY(meminfo) done

INIT_ENTRY(asinfo) done

INIT_ENTRY(hwinfo) done

INIT_ENTRY(cpuinfo) done

INIT_ENTRY(cacheattr) done

INIT_ENTRY(qtime) done

INIT_ENTRY(callout) done

INIT_ENTRY(callin) done

INIT_ENTRY(typed_strings) done

INIT_ENTRY(strings) done

INIT_ENTRY(intrinfo) done

INIT_ENTRY(smp) done

INIT_ENTRY(pminfo) done

INIT_ENTRY(mdriver) done

memset cpu=0x1081fbc8, size=0x00000020

[cpu:0] startup_memory_map done

[cpu:0] memmove done

[cpu:0] startup_memory_unmap done

output_callouts(0) done

alloc_syspage_memory done

jtag_store_syspage_addr done

Header size=0x0000009c, Total Size=0x00000480, #Cpu=1, Type=4

Section:system_private offset:0x000001d8 size:0x00000068

syspage ptr user:fc404000 kernel:fc404000

cpupage ptr user:fc404790 kernel:fc404790 spacing:32

kdebug info:00000000 callback:00000000

boot pgms: idx=0

0) base paddr:10822000 start addr:fe0266f4

ramsize:00000000 pagesize:00001000

Section:qtime offset:0x00000148 size:0x00000048

boot:00000000 CPS:000000000219df50 rate/scale:28368794/-15 intr:17

Section:callout offset:0x000000a0 size:0x00000048

reboot:fc404604 power:fc404620

timer_load:fc404634 reload:fc404684 value:fc404698

0) display:fc4046b0 poll:fc4046d4 break:fc4046f8

1) display:00000000 poll:00000000 break:00000000

Section:cpuinfo offset:0x00000190 size:0x00000020

0) cpu:41069265 flags:40000000 speed:0000008d cache i/d:1/0 name:48

Section:cacheattr offset:0x00000440 size:0x00000040

0) flags:32 size:0020 #lines:0200 control:fc4044bc next:255

1) flags:11 size:0020 #lines:0200 control:fc404510 next:255

Section:meminfo offset:0x00000480 size:0x00000000

Section:asinfo offset:0x00000300 size:0x00000100

0000) 0000000000000000-00000000ffffffff o:ffff a:0010 p:100 c:00000000
n:21

0020) 0000000010000000-0000000011ffffff o:0000 a:0017 p:100 c:00000000
n:28

0040) 0000000010821108-000000001098c003 o:0000 a:0005 p:100 c:00000000
n:55

0060) 0000000010800000-0000000010821107 o:0000 a:0007 p:100 c:00000000
n:63

0080) 0000000010821108-000000001098c003 o:0000 a:0007 p:100 c:00000000
n:71

00a0) 0000000010000000-0000000010007fff o:0020 a:0007 p:100 c:00000000
n:79

00c0) 00000000100127b0-00000000107fffff o:0020 a:0007 p:100 c:00000000
n:79

00e0) 000000001098c004-0000000011ffffff o:0020 a:0007 p:100 c:00000000
n:79

Section:hwinfo offset:0x000002b8 size:0x00000048

0) size:3 tag:3 isize:3, iname:0, owner:65535, kids:1

12) size:3 tag:17 isize:3, iname:9, owner:0, kids:1

24) size:3 tag:3 isize:3, iname:32, owner:12, kids:1

36) size:4 tag:41 isize:4, iname:36, owner:24, kids:0

00 00 00 00

Section:typed_strings offset:0x00000240 size:0x00000020

off:0 type:5 string:'jaguar2'

off:12 type:2 string:'localhost'

Section:strings offset:0x00000260 size:0x00000058

[0]'hw' [3]'Group' [9]'unknown' [17]'Bus' [21]'memory' [28]'ram' [32]'rtc'

[36]'NONE' [41]'Device' [48]'arm926' [55]'imagefs' [63]'startup'

[71]'bootram' [79]'sysram'

Section:intrinfo offset:0x00000400 size:0x00000040

0) vector_base:00000000, #vectors:32, cascade_vector:7fffffff

cpu_intr_base:00000000, cpu_intr_stride:0, flags:0000

id => flags:8000, size:0050, rtn:fc404540

eoi => flags:9000, size:002c, rtn:fc404590

mask:fc4045bc, unmask:fc4045e0, config:00000000

Section:smp offset:0x00000480 size:0x00000000

Section:pminfo offset:0x00000480 size:0x00000000

Section:mdriver offset:0x00000480 size:0x00000000

Section:boxinfo offset:0x000001b0 size:0x00000028

hw_flags:00000000

Section:cpu offset:0x00000128 size:0x00000020

page_flush:fc404480 page_flush_deferred:fc4044b8

upte_ro:00000aae upte_rw:00000ffe

kpte_ro:0000000e kpte_rw:0000055e

mask_nc:0000000c



System page at phys:10012000 user:fc404000 kern:fc404000

Starting next program at vfe0266f4



Shutdown[0,0] S/C/F=4/1/1 C/D=fe006950/fe062490 state(c0)= now lock

QNX Version 6.3.2 Release 2006/03/16-14:15:55EST

[0]PID-TID=1-1? P/T FL=00018001/09000040

[0]ASPACE=>NULL

armle context[fe061278]:

0000: fc404000 fc404148 200000d3 00000000 200000d3 00000001 00000002
fe065cbc

0020: fe065c68 fe065c28 fe06238c fe0612d0 fe0625e0 fe0612bc fe03ac18
fc404174

0040: 200000d3

instruction[fc404174]:

f1 ff ff ff 00 00 00 00 01 00 00 00 b2 07 00 00 00 00 00 00 00 00 00 00 00
00

stack[fe0612bc]:

0000: fe060320 fe050a9c fe061304 fe0612d4 fe04e404 fe050a64 fe04e070
fe060320

0020: fe060320 fe065c28 0000001a 0000003f fe061278 fe065c28 fe06238c
fe06131c

0040: fe061308 fe03aedc fe04e098 108206e0 fe0266f4 1000bfe8 fe061320
00051078

0060: fe03ae1c 000003ff fc43e000 000000c8 00000001 00000000 00000000
fe06133c
Pusik Park
 

Re: QNX Porting problem on ARM926EJ-S-based SoC platform

Postby Pusik Park » Mon Feb 18, 2008 2:11 pm

Hello.



I got some information of my status by TRACE32 ARM ICD.

The below assembler code is my status.



I guess that there is some problem in callout_reboot_xxxxx.S but I need some
hint.

Actually, I don't want to use WatchDog scheme.



Please give me a hint.



Best regards.



Pusik.



{ Tabs: 4 }

SR:4002:FE029180 QueryObjectDone: mov r12,r13


stmdb r13!,{r11-r12,r14,pc}


sub r11,r12,#0x4


mov r3,#0x0


str r3,[r0,#0x1C0]


ldmdb r11,{r11,r13,pc}

SR:4002:FE029198 reboot: mov
r12,r13


stmdb r13!,{r4,r11-r12,r14,pc}


sub r11,r12,#0x4


mov r4,r0


ldr r2,0xFE0291DC


ldr r3,[r2]


orr r3,r3,#0x40


str r3,[r2]


bl 0xFE03BC44 ; cpu_reboot


ldr r3,0xFE0291E0


ldr r2,[r3]


ldr r3,0xFE0291E4


ldr r0,[r3]


mov r1,r4


mov r14,pc


ldr pc,[r2]


ldmdb r11,{r4,r11,r13,pc}


cdp2 p4,0x0,c2,c6,c12,0x4


cdp2 p5,0x0,c2,c6,c4,0x7


cdp2 p3,0x0,c2,c6,c0,0x4

SR:4002:FE0291E8 RebootSystem: mov r12,r13


stmdb r13!,{r4,r11-r12,r14,pc}


sub r11,r12,#0x4


mov r4,r0


ldr r3,0xFE029220 ; r3 = 0xFE06248C


ldr r3,[r3] ; r3 = data[0xFE06248C]
= 0x000000C0


cmp r3,#0x0


bne 0xFE029214


ldr r0,0xFE029224 ; r0 = 0xFE029198


mov r1,r4


bl 0xFE057210 ; __Ring0

SR:4002:FE029214 mov
r0,r4


bl 0xFE029198 ; reboot

TRACE32 stop hear --> b
0xFE02921C

SR:4002:FE029220 FE06248C cdp2
p4,0x0,c2,c6,c12,0x4

SR:4002:FE029224 FE029198 mcr2
p1,0x0,r9,c2,c8,0x4

SR:4002:FE029228 E91BA810 ldmdb
r11,{r4,r11,r13,pc}

SR:4002:FE02922C kerext_stack_cont: mov
r12,r13


stmdb r13!,{r4-r5,r11-r12,r14,pc}

SR:4002:FE06248C 000000C0





The below code is my callout_reboot_jaguar2.S file.



/*

* -----------------------------------------------------------------------

* Routine to patch callout code

*

* On entry:

* r0 - physical address of syspage

* r1 - virtual address of syspage

* r2 - offset from start of syspage to start of the callout routine

* r3 - offset from start of syspage to read/write data used by
callout

* -----------------------------------------------------------------------

*/



patch_reboot:

stmdb sp!,{r4,lr}

add r4, r0, r2
// address of callout routine



/*

* Map Watchdog Timer registers

*/

mov r0, #0x10

ldr r1, Lpaddr

bl callout_io_map



/*

* Patch the callout routine

*/

CALLOUT_PATCH r4, r0, r1, r2, ip

ldmia sp!,{r4,pc}



Lpaddr: .word J2_WDT_CTRL



CALLOUT_START(reboot_jaguar2, 0, patch_reboot)

/*

* Get the Watchdog Timer base address (patched)

*/

mov ip, #0x000000ff

orr ip, ip, #0x0000ff00

orr ip, ip, #0x00ff0000

orr ip, ip, #0xff000000



// Store the address of J2_WDT_CTRL at ip

ldr r1, [ip, #0]

orr r1, r1, #0x03 /* enable wdt, and enable
reset at terminal count */

str r1, [ip, #0]

CALLOUT_END(reboot_jaguar2)





This is a part of code in startup's main.c code.



const struct callout_slot callouts[] = {

{ CALLOUT_SLOT( reboot, _jaguar2 ) },

};











From: openqnx-developer-bounces-5NWGOfrQmneRv ... .gmane.org
[mailto:openqnx-developer-bounces-5NWGOfrQmneRv+LV9MX5uipxlwaOVQ5f@public.gmane.org] On Behalf Of Pusik
Park
Sent: Monday, February 18, 2008 10:22 PM
To: openqnx-developer-5NWGOfrQmneRv+LV9MX5u ... .gmane.org
Subject: [Openqnx-developer] QNX Porting problem on ARM926EJ-S-based SoC
platform



Dear Everyone.



I solved callout_debug_xxxxx.S and I looked at another kernel debugging
message like the below log.



What happens?

Unfortunately, I don't know where is the problem ?



Please help me.



Best regards.



Pusik.





Brief description of my CPU and Board.



CPU Core : ARM926EJ-S 32-bit RISC

CPU Cache: 16KB I-Cache, 16KB D-Cache

CPU Clock : 141MHz

CPU interrupt sources : 29 ea

Timers : 32-bit timer 2 ea

NOR Flash : 1MB (base address = 0x0000_0000)

SDRAM : 32MB (base address = 0x1000_0000)





----------------------------------------------------------------------------
---------------------------------

QNX IPL for JAGUAR



Commands:

s: load image serially using sendnto

f: load image from flash

ipl> send image now...

Download complete, calling image_scan...

Found image, calling image_setup...

image_scan return : 10400000

signature : 0x00FF7EEB

version : 0x00000001

flags1 : 0x00000001

flags2 : 0x00000000

header_size : 0x00000100

machine : 0x00000028

startup_vaddr : 0x10801B80

paddr_bias : 0x00000000

image_paddr : 0x10800000

ram_paddr : 0x10800000

ram_size : 0x0018C004

startup_size : 0x00021108

stored_size : 0x0018C004

imagefs_paddr : 0x00000000

imagefs_size : 0x0016AEFC

preboot_size : 0x00000000

zero0 : 0x00000000

image setup complete, calling image_start...

init_raminfo

add_ram start=0x10000000, size=0x02000000

lsp.asinfo.size=0x00000000

1

as_add_containing start=268435456, end=301989887, attr=00000007, name=ram,
conta

iner=memory

2

add_mem(10000000,02000000)

alloc_ram(0x10821108,0x0016aefc,0x00000001) => 0x10821108

add_mem(1098c004,01673ffc)

find_ram(size=0x00008000, align=0x00001000, colour=0x00000000,
mask=0x00000000)

Addr=0x10000000

jaguar2_cpu_freq: F_in=32768000

alloc_ram(0x10800000,0x0018c004,0x00000001) => 0x10800000

alloc_ram(0xffffffff,0x00004000,0x00004000) => find_ram(size=0x00004000,
align=0x00004000, colour=0x00000000, mask=0x00000000)

Addr=0x10008000

add_mem(1000c000,007f4000)

alloc_ram(0xffffffff,0x00001000,0x00001000) => find_ram(size=0x00001000,
align=0x00001000, colour=0x00000000, mask=0x00000000)

Addr=0x1000c000

alloc_ram(0xffffffff,0x00001000,0x00001000) => find_ram(size=0x00001000,
align=0x00001000, colour=0x00000000, mask=0x00000000)

Addr=0x1000d000

init_intrinfo

add_interrupt_array size=52, incr=52

add_interrupt

init_qtime

init_cpuinfo

Dcache: 512x32 WB

Icache: 512x32

arm926 rev 5 141MHz

alloc_ram(0xffffffff,0x00001000,0x00001000) => find_ram(size=0x00001000,
align=0x00001000, colour=0x00000000, mask=0x00000000)

Addr=0x1000e000

alloc_ram(0xffffffff,0x00001000,0x00001000) => find_ram(size=0x00001000,
align=0x00001000, colour=0x00000000, mask=0x00000000)

Addr=0x1000f000

init_hwinfo

add_typed_string 0x00000005=jaguar2

init_system_private

add_typed_string 0x00000002=localhost

load_ifs done

as_find memory done

as_add imagefs done

as_add startup done

as_add bootram done

Find boot process 0 (inode 3758096386)

alloc_ram(0xffffffff,0x00001000,0x00001000) => find_ram(size=0x00001000,
align=0x00001000, colour=0x00000000, mask=0x00000000)

Addr=0x10010000

alloc_ram(0xffffffff,0x00001000,0x00001000) => find_ram(size=0x00001000,
align=0x00001000, colour=0x00000000, mask=0x00000000)

Addr=0x10011000

Load boot process '/proc/boot/procnto-instr'

boot_pgm[276963328].base=0x100001f4

boot_pgm[4261570292].entry=0x00000000

memmove done

option: c

reserved_size=0

smp_hook_rtn done

mdriver_hook done

as_add_containing start=268435456, end=268468223, attr=00000007,
name=sysram, container=ram

as_add_containing start=268509184, end=276824063, attr=00000007,
name=sysram, container=ram

as_add_containing start=278446084, end=301989887, attr=00000007,
name=sysram, container=ram

add_system done

alloc_syspage_memory

output_callouts(1) done

callouts_size=0x00000290

spsize=0x00000790

cpu_alloc_syspage_memory cpupagep=0x00000007, syspagep=0x00000000,
spsize=0x00000790

alloc_ram(addr=0xffffffff, size=0x000007b0, align=0x00001000)

alloc_ram(0xffffffff,0x000007b0,0x00001000) => find_ram(size=0x000007b0,
align=0x00001000, colour=0x00000000, mask=0x00000000)

Addr=0x10012000

cpu_alloc_syspage_memory cpupage_paddr=0x10012790, syspage_paddr=0x10012000

INIT_ENTRY(system_private) done

INIT_ENTRY(meminfo) done

INIT_ENTRY(asinfo) done

INIT_ENTRY(hwinfo) done

INIT_ENTRY(cpuinfo) done

INIT_ENTRY(cacheattr) done

INIT_ENTRY(qtime) done

INIT_ENTRY(callout) done

INIT_ENTRY(callin) done

INIT_ENTRY(typed_strings) done

INIT_ENTRY(strings) done

INIT_ENTRY(intrinfo) done

INIT_ENTRY(smp) done

INIT_ENTRY(pminfo) done

INIT_ENTRY(mdriver) done

memset cpu=0x1081fbc8, size=0x00000020

[cpu:0] startup_memory_map done

[cpu:0] memmove done

[cpu:0] startup_memory_unmap done

output_callouts(0) done

alloc_syspage_memory done

jtag_store_syspage_addr done

Header size=0x0000009c, Total Size=0x00000480, #Cpu=1, Type=4

Section:system_private offset:0x000001d8 size:0x00000068

syspage ptr user:fc404000 kernel:fc404000

cpupage ptr user:fc404790 kernel:fc404790 spacing:32

kdebug info:00000000 callback:00000000

boot pgms: idx=0

0) base paddr:10822000 start addr:fe0266f4

ramsize:00000000 pagesize:00001000

Section:qtime offset:0x00000148 size:0x00000048

boot:00000000 CPS:000000000219df50 rate/scale:28368794/-15 intr:17

Section:callout offset:0x000000a0 size:0x00000048

reboot:fc404604 power:fc404620

timer_load:fc404634 reload:fc404684 value:fc404698

0) display:fc4046b0 poll:fc4046d4 break:fc4046f8

1) display:00000000 poll:00000000 break:00000000

Section:cpuinfo offset:0x00000190 size:0x00000020

0) cpu:41069265 flags:40000000 speed:0000008d cache i/d:1/0 name:48

Section:cacheattr offset:0x00000440 size:0x00000040

0) flags:32 size:0020 #lines:0200 control:fc4044bc next:255

1) flags:11 size:0020 #lines:0200 control:fc404510 next:255

Section:meminfo offset:0x00000480 size:0x00000000

Section:asinfo offset:0x00000300 size:0x00000100

0000) 0000000000000000-00000000ffffffff o:ffff a:0010 p:100 c:00000000
n:21

0020) 0000000010000000-0000000011ffffff o:0000 a:0017 p:100 c:00000000
n:28

0040) 0000000010821108-000000001098c003 o:0000 a:0005 p:100 c:00000000
n:55

0060) 0000000010800000-0000000010821107 o:0000 a:0007 p:100 c:00000000
n:63

0080) 0000000010821108-000000001098c003 o:0000 a:0007 p:100 c:00000000
n:71

00a0) 0000000010000000-0000000010007fff o:0020 a:0007 p:100 c:00000000
n:79

00c0) 00000000100127b0-00000000107fffff o:0020 a:0007 p:100 c:00000000
n:79

00e0) 000000001098c004-0000000011ffffff o:0020 a:0007 p:100 c:00000000
n:79

Section:hwinfo offset:0x000002b8 size:0x00000048

0) size:3 tag:3 isize:3, iname:0, owner:65535, kids:1

12) size:3 tag:17 isize:3, iname:9, owner:0, kids:1

24) size:3 tag:3 isize:3, iname:32, owner:12, kids:1

36) size:4 tag:41 isize:4, iname:36, owner:24, kids:0

00 00 00 00

Section:typed_strings offset:0x00000240 size:0x00000020

off:0 type:5 string:'jaguar2'

off:12 type:2 string:'localhost'

Section:strings offset:0x00000260 size:0x00000058

[0]'hw' [3]'Group' [9]'unknown' [17]'Bus' [21]'memory' [28]'ram' [32]'rtc'

[36]'NONE' [41]'Device' [48]'arm926' [55]'imagefs' [63]'startup'

[71]'bootram' [79]'sysram'

Section:intrinfo offset:0x00000400 size:0x00000040

0) vector_base:00000000, #vectors:32, cascade_vector:7fffffff

cpu_intr_base:00000000, cpu_intr_stride:0, flags:0000

id => flags:8000, size:0050, rtn:fc404540

eoi => flags:9000, size:002c, rtn:fc404590

mask:fc4045bc, unmask:fc4045e0, config:00000000

Section:smp offset:0x00000480 size:0x00000000

Section:pminfo offset:0x00000480 size:0x00000000

Section:mdriver offset:0x00000480 size:0x00000000

Section:boxinfo offset:0x000001b0 size:0x00000028

hw_flags:00000000

Section:cpu offset:0x00000128 size:0x00000020

page_flush:fc404480 page_flush_deferred:fc4044b8

upte_ro:00000aae upte_rw:00000ffe

kpte_ro:0000000e kpte_rw:0000055e

mask_nc:0000000c



System page at phys:10012000 user:fc404000 kern:fc404000

Starting next program at vfe0266f4



Shutdown[0,0] S/C/F=4/1/1 C/D=fe006950/fe062490 state(c0)= now lock

QNX Version 6.3.2 Release 2006/03/16-14:15:55EST

[0]PID-TID=1-1? P/T FL=00018001/09000040

[0]ASPACE=>NULL

armle context[fe061278]:

0000: fc404000 fc404148 200000d3 00000000 200000d3 00000001 00000002
fe065cbc

0020: fe065c68 fe065c28 fe06238c fe0612d0 fe0625e0 fe0612bc fe03ac18
fc404174

0040: 200000d3

instruction[fc404174]:

f1 ff ff ff 00 00 00 00 01 00 00 00 b2 07 00 00 00 00 00 00 00 00 00 00 00
00

stack[fe0612bc]:

0000: fe060320 fe050a9c fe061304 fe0612d4 fe04e404 fe050a64 fe04e070
fe060320

0020: fe060320 fe065c28 0000001a 0000003f fe061278 fe065c28 fe06238c
fe06131c

0040: fe061308 fe03aedc fe04e098 108206e0 fe0266f4 1000bfe8 fe061320
00051078

0060: fe03ae1c 000003ff fc43e000 000000c8 00000001 00000000 00000000
fe06133c
Pusik Park
 


Return to OpenQNX Developers Mailing List

Who is online

Users browsing this forum: No registered users and 1 guest