Skip navigation.
Home
The QNX Community Portal

View topic - QNX6 under VmWare dies on chkfsys at startup

QNX6 under VmWare dies on chkfsys at startup

Read-only archive of qnx.newuser (Installation, configuration and administration of the QNX Neutrino or QNX Momentics environments) at inn.qnx.com

QNX6 under VmWare dies on chkfsys at startup

Postby Tomá¹ Vognar » Thu Aug 30, 2007 3:58 pm

QNX6 under VmWare dies on chkfsys at boot-time.

Is it possible to solve this problem?
--


Tomas VOGNAR
Tomá¹ Vognar
 

Re: QNX6 under VmWare dies on chkfsys at startup

Postby Mario Charest » Thu Aug 30, 2007 5:19 pm

"Tomá¹ Vognar" <(vognar)@esys.cz> wrote in message
news:fb6p6l$6gg$1@inn.qnx.com...
QNX6 under VmWare dies on chkfsys at boot-time.

Can you be a little more precises when you say "dies". I would be really
surprise the issue would be with vmware.


Is it possible to solve this problem?
--


Tomas VOGNAR
Mario Charest
 

Re: QNX6 under VmWare dies on chkfsys at startup

Postby Tomá¹ Vognar » Tue Sep 04, 2007 8:10 am

Thank you for reply. Screen is attached.

It does'n matter, if boot disk is virtial (file) or real. Initially it went,
until the chkfsys was requested.

Tomas Vognar
Tomá¹ Vognar
 

Re: QNX6 under VmWare dies on chkfsys at startup

Postby Tomá¹ Vognar » Tue Sep 04, 2007 8:26 am

D:\Dokumenty\My Virtual Machines\qnx6#2\vmware.log (end of file):

Sep 04 10:19:46: vcpu-0| CoreDump: Including thread 1388
Sep 04 10:19:46: vcpu-0| CoreDump: Including thread 864
Sep 04 10:19:46: vcpu-0| CoreDump: Including thread 840
Sep 04 10:19:46: vcpu-0| CoreDump: Including thread 3400
Sep 04 10:19:46: vcpu-0| CoreDump: Including thread 1612
Sep 04 10:19:46: vcpu-0| CoreDump: Including thread 612
Sep 04 10:19:46: vcpu-0| CoreDump: Including thread 532
Sep 04 10:19:46: vcpu-0| CoreDump: Including thread 2356
Sep 04 10:19:46: vcpu-0| Msg_Post: Error
Sep 04 10:19:46: vcpu-0| [msg.log.error.unrecoverable] VMware Workstation
unrecoverable error: (vcpu-0)
Sep 04 10:19:46: vcpu-0| ASSERT F(553):1430 bugNr=3285
Sep 04 10:19:46: vcpu-0| [msg.panic.haveLog] A log file is available in
"D:\Dokumenty\My Virtual Machines\qnx6#2\vmware.log". [msg.panic.haveCore]
A core file is available in "C:\Documents and Settings\Tomá¹ Vognar\Data
aplikací\VMware\vmware-vmx-1856.dmp".
[msg.panic.requestSupport.withLogAndCore] Please request support and include
the contents of the log file and core file. [msg.panic.response] We will
respond on the basis of your support entitlement.
Sep 04 10:19:46: vcpu-0| ----------------------------------------
Tomá¹ Vognar
 

Re: QNX6 under VmWare dies on chkfsys at startup

Postby Colin Burgess » Tue Sep 04, 2007 1:48 pm

On the basis of this message...

http://forum.ru-board.com/topic.cgi?for ... &start=540

it appears to be DMA related.

Try disabling DMA in the boot menu.

Tomá¹ Vognar wrote:
D:\Dokumenty\My Virtual Machines\qnx6#2\vmware.log (end of file):

Sep 04 10:19:46: vcpu-0| CoreDump: Including thread 1388
Sep 04 10:19:46: vcpu-0| CoreDump: Including thread 864
Sep 04 10:19:46: vcpu-0| CoreDump: Including thread 840
Sep 04 10:19:46: vcpu-0| CoreDump: Including thread 3400
Sep 04 10:19:46: vcpu-0| CoreDump: Including thread 1612
Sep 04 10:19:46: vcpu-0| CoreDump: Including thread 612
Sep 04 10:19:46: vcpu-0| CoreDump: Including thread 532
Sep 04 10:19:46: vcpu-0| CoreDump: Including thread 2356
Sep 04 10:19:46: vcpu-0| Msg_Post: Error
Sep 04 10:19:46: vcpu-0| [msg.log.error.unrecoverable] VMware Workstation
unrecoverable error: (vcpu-0)
Sep 04 10:19:46: vcpu-0| ASSERT F(553):1430 bugNr=3285
Sep 04 10:19:46: vcpu-0| [msg.panic.haveLog] A log file is available in
"D:\Dokumenty\My Virtual Machines\qnx6#2\vmware.log". [msg.panic.haveCore]
A core file is available in "C:\Documents and Settings\Tomá¹ Vognar\Data
aplikací\VMware\vmware-vmx-1856.dmp".
[msg.panic.requestSupport.withLogAndCore] Please request support and
include
the contents of the log file and core file. [msg.panic.response] We will
respond on the basis of your support entitlement.
Sep 04 10:19:46: vcpu-0| ----------------------------------------


--
cburgess@qnx.com
Colin Burgess
 

Re: QNX6 under VmWare dies on chkfsys at startup

Postby Tomá¹ Vognar » Wed Sep 05, 2007 10:27 am

So I've tried it:
- disable DMA in VMWare BIOS (pressing F2 before boot)
- disable DMA pressing D while booting QNX6
.....the same result

T.Vognar


"Colin Burgess" <cburgess@qnx.com> pí¹e v diskusním pøíspìvku
news:fbjnd6$abh$1@inn.qnx.com...
On the basis of this message...

http://forum.ru-board.com/topic.cgi?for ... &start=540

it appears to be DMA related.

Try disabling DMA in the boot menu.
Tomá¹ Vognar
 

Re: QNX6 under VmWare dies on chkfsys at startup

Postby Tomá¹ Vognar » Wed Sep 05, 2007 11:08 am

Disabling enumerator for legacy ISA overcome the problem:
While booting press <space>,<F11>,<F1>,<enter>,<enter>

T.Vognar

"Tomá¹ Vognar" <(vognar)@esys.cz> pí¹e v diskusním pøíspìvku
news:fb6p6l$6gg$1@inn.qnx.com...
QNX6 under VmWare dies on chkfsys at boot-time.

Is it possible to solve this problem?
--


Tomas VOGNAR
Tomá¹ Vognar
 

Re: QNX6 under VmWare dies on chkfsys at startup

Postby Mario Charest » Wed Sep 05, 2007 12:32 pm

"Tomá¹ Vognar" <(vognar)@esys.cz> wrote in message
news:fbm2du$eua$1@inn.qnx.com...
Disabling enumerator for legacy ISA overcome the problem:
While booting press <space>,<F11>,<F1>,<enter>,<enter

T.Vognar

Hum, does your VM has a floppy drive? Try removing it, also remove any
devices like sound, parallel port, etc.

"Tomá¹ Vognar" <(vognar)@esys.cz> pí¹e v diskusním pøíspìvku
news:fb6p6l$6gg$1@inn.qnx.com...
QNX6 under VmWare dies on chkfsys at boot-time.

Is it possible to solve this problem?
--


Tomas VOGNAR

Mario Charest
 

Re: QNX6 under VmWare dies on chkfsys at startup

Postby Tomá¹ Vognar » Wed Sep 05, 2007 5:33 pm

Fine, thanks. It works. I've removed floppy and audio.
T.Vognar


"Mario Charest" <root@127.0.0.1> pí¹e v diskusním pøíspìvku
news:fbm7ap$hgk$1@inn.qnx.com...
"Tomá¹ Vognar" <(vognar)@esys.cz> wrote in message
news:fbm2du$eua$1@inn.qnx.com...
Disabling enumerator for legacy ISA overcome the problem:
While booting press <space>,<F11>,<F1>,<enter>,<enter

T.Vognar

Hum, does your VM has a floppy drive? Try removing it, also remove any
devices like sound, parallel port, etc.


"Tomá¹ Vognar" <(vognar)@esys.cz> pí¹e v diskusním pøíspìvku
news:fb6p6l$6gg$1@inn.qnx.com...
QNX6 under VmWare dies on chkfsys at boot-time.

Is it possible to solve this problem?
--


Tomas VOGNAR



Tomá¹ Vognar
 

Re: QNX6 under VmWare dies on chkfsys at startup

Postby Mario Charest » Thu Sep 06, 2007 12:31 pm

"Tomá¹ Vognar" <(vognar)@esys.cz> wrote in message
news:fbmov3$pqp$1@inn.qnx.com...
Fine, thanks. It works. I've removed floppy and audio.
T.Vognar

My guess is it was the floppy. It doesn't work at all under QNX4 (crashes)

so I've made it a habit of never having one.

"Mario Charest" <root@127.0.0.1> pí¹e v diskusním pøíspìvku
news:fbm7ap$hgk$1@inn.qnx.com...

"Tomá¹ Vognar" <(vognar)@esys.cz> wrote in message
news:fbm2du$eua$1@inn.qnx.com...
Disabling enumerator for legacy ISA overcome the problem:
While booting press <space>,<F11>,<F1>,<enter>,<enter

T.Vognar

Hum, does your VM has a floppy drive? Try removing it, also remove any
devices like sound, parallel port, etc.


"Tomá¹ Vognar" <(vognar)@esys.cz> pí¹e v diskusním pøíspìvku
news:fb6p6l$6gg$1@inn.qnx.com...
QNX6 under VmWare dies on chkfsys at boot-time.

Is it possible to solve this problem?
--


Tomas VOGNAR




Mario Charest
 


Return to qnx.newuser

Who is online

Users browsing this forum: Bing [Bot] and 1 guest