Skip navigation.
Home
The QNX Community Portal

View topic - std::terminate(void) undefined reference

std::terminate(void) undefined reference

Read-only archive of qnx.newuser (Installation, configuration and administration of the QNX Neutrino or QNX Momentics environments) at inn.qnx.com

std::terminate(void) undefined reference

Postby hamza » Tue Sep 11, 2007 6:09 pm

Hello,
I'm trying to develop drivers for the PCI-6025E board using MHDDK.
During the link process I'm getting the following errors :

make -k EXTRA_SUFFIXES=cpp all CCOPTS+=-p
LDOPTS+=-p --file=C:/tmp/PCIProject/PCIProject/QMakefile12512.tmp

QCC -c -DkLittleEndian=1 -I ./ChipObjects -I ./Examples -I . -oPCIProject.o
PCIProject.cpp

QCC -c -DkLittleEndian=1 -I ./ChipObjects -I ./Examples -I . -otESeries.o
../ChipObjects/tESeries.cpp

QCC -c -DkLittleEndian=1 -I ./ChipObjects -I ./Examples -I . -otSTC.o
../ChipObjects/tSTC.cpp

QCC -c -DkLittleEndian=1 -I ./ChipObjects -I ./Examples -I . -oosiBus.o
osiBus.cpp

QCC -c -DkLittleEndian=1 -I ./ChipObjects -I ./Examples -I . -oosiUserCode.o
osiUserCode.cpp

QCC PCIProject.o tESeries.o tSTC.o osiBus.o osiUserCode.o -oPCIProject

PCIProject.o: In function `test(iBus *)':

PCIProject.o(.text+0x43d): undefined reference to `std::terminate(void)'

osiUserCode.o: In function `acquireBoard(char *)':

osiUserCode.o(.text+0x315): undefined reference to `std::terminate(void)'

cc: C:/QNX630/host/win32/x86/usr/bin/ntox86-ld caught signal 1

make: *** [PCIProject] Error 1

QCC -c -DkLittleEndian=1 -I ./ChipObjects -I ./Examples -I . -olsdaq.o
lsdaq.cpp

QCC lsdaq.o -olsdaq

make: Target `all' not remade because of errors.

In the acquireBoard() function there is no visible call to the
std::terminate() fucntion neither in test() function.

While looking in the internet I saw that std::terminate() is related to
exceptions. In the acquireBoard() and test() functions there is no
exceptions handler, so I can't see the source of the problem.

I'm developping on QNX IDE 1.4 on WinXP. I'm programming using C++ and
compiling with GCC 2.95.3.

If someone has an idea to resolve this issue it will be welcomed.

Here is the code for acquireBoard() and test() functions :

***************************

void test(iBus *bus)

{


tAddressSpace Bar1;

tESeries *board;

tSTC *theSTC;

unsigned uStatus; //Flag to indicate FIFO not empty

unsigned uValue; //Binary voltage acquired


Bar1 = bus->createAddressSpace(kPCI_BAR1);

board = new tESeries(Bar1);

theSTC = new tSTC(Bar1);


//Configure the board with the channel settings

Configure_Board(theSTC,board);


//Now Program the DAQ-STC


//Configure the timebase options for DAQ-STC

MSC_Clock_Configure(theSTC);


//Clear ADC FIFO

Clear_FIFO(theSTC);


//Stop any activities in progress

AI_Reset_All(theSTC);


//Set DAQ STC for E-series board

AI_Board_Personalize(theSTC);


//Access the first value in the configuration FIFO

AI_Initialize_Configuration_Memory_Output(theSTC);


//Setup for any external multiplexer

AI_Board_Environmentalize(theSTC);


//Set triggering options

AI_Trigger_Signals(theSTC);


//Select the scan start event

AI_Scan_Start(theSTC);


//Select the end of scan event

AI_End_of_Scan(theSTC);


//Clear ADC FIFO

Clear_FIFO(theSTC);


//Start the acquistion

AI_Start_The_Acquisition(theSTC);


//Poll the FIFO not empty flag to determine if

//data is available. If FIFO not empty then

//read the data.

//The Data has to be scaled to get the

//value in voltage. For Example PCI-6024 if used in

//Bipolar mode has range of +-5 Volts, the corresponding

//ADC levels are form -2048 to 2047. Thus a value of 2047

//represents +5 volts.


do

{

uStatus = theSTC->AI_Status_1.readRegister();

if (!( (uStatus & 0x1000) == 0x1000))

uValue = board->AIFifoData.readRegister();


}while(((uStatus & 0x1000) == 0x1000));

printf("Value %d is %d\n",1,uValue);


delete theSTC;

delete board;

bus->destroyAddressSpace(Bar1);

}

*******************************************

iBus* acquireBoard(tChar *brdLocation)

{

iBus *bus;


u32 devBAR0, devBAR1;

u32 BAR0sz, BAR1sz;

void *mem0,*mem1;


struct pci_dev_info info;

u32 serverHdl;

void *deviceHdl;


if ( ThreadCtl (_NTO_TCTL_IO, 0) == -1)

{

perror ("ThreadCtl - requesting I/O priviledge");

return NULL;

}


// connect to the PCI server

if (serverHdl = pci_attach(0) < 0)

{

perror("pci_attach");

return NULL;

}


// printf ("device to open: %s\n\n", brdLocation);


u16 busNumber;

u16 deviceNumber;


sscanf (brdLocation, "PXI%hd::%hd::INSTR", &busNumber, &deviceNumber);


// printf ("bus number: %d - device number: %d\n", busNumber, deviceNumber);


info.BusNumber = busNumber;

info.DevFunc = PCI_DEVFUNC (deviceNumber, 0);


deviceHdl = pci_attach_device
(0,PCI_SHARE|PCI_INIT_ALL|PCI_SEARCH_BUSDEV,0,&info);

if (deviceHdl == 0)

{

perror ("pci_attach_device");

return NULL;

}


//extract physical BARs for card


devBAR0 = PCI_MEM_ADDR (info.CpuBaseAddress[0]);

devBAR1 = PCI_MEM_ADDR (info.CpuBaseAddress[1]);


BAR0sz = info.BaseAddressSize[0];

BAR1sz = info.BaseAddressSize[1];


//memory map the PCI card


mem0 = mmap_device_memory ( NULL,

info.BaseAddressSize[0],

PROT_READ|PROT_WRITE|PROT_NOCACHE,

0,

info.CpuBaseAddress[0]);

if (mem0 == MAP_FAILED)

{

perror ("bar0 map");

pci_detach_device (deviceHdl);

return NULL;

}


mem1 = mmap_device_memory ( NULL,

info.BaseAddressSize[1],

PROT_READ|PROT_WRITE|PROT_NOCACHE,

0,

info.CpuBaseAddress[1]);


if (mem1 == MAP_FAILED)

{

perror ("bar1 map");

pci_detach_device (deviceHdl);

return NULL;

}


//create a new iBus

bus = new iBus(0, 0, mem0, mem1);

bus->_physBar[0] = (u32)devBAR0;

bus->_physBar[1] = (u32)devBAR1;

bus->_physBar[2] = (u32)NULL;

bus->_physBar[3] = (u32)NULL;

bus->_physBar[4] = (u32)NULL;

bus->_physBar[5] = (u32)NULL;


tQNXSpecific *specific = new tQNXSpecific;


specific->serverHdl = serverHdl;

specific->deviceHdl = deviceHdl;

specific->bar0Address = mem0;

specific->bar1Address = mem1;

specific->bar0Size = BAR0sz;

specific->bar1Size = BAR1sz;


bus->_osSpecific = (void*)specific;

return bus;

}

**********************************

Thank you
hamza
 

Return to qnx.newuser

Who is online

Users browsing this forum: No registered users and 1 guest