Skip navigation.
Home
The QNX Community Portal

View topic - QNX4+VmWare+SCSI

QNX4+VmWare+SCSI

Read-only archive of qnx.qnx4 (General QNX4 Discussion Group) at inn.qnx.com

QNX4+VmWare+SCSI

Postby KBOB » Wed Aug 10, 2005 6:00 am

I installed qnx4 under vmware workstation 5 on Windows2000 host.
After that I add to vwware virtual machine scsi drive with two qnx4
partitions as raw divice.
Running qnx4 and scan pci with utilites SHOW_PCI, it says:
Class = Mass Storage (SCSI)
Vendor ID = 104bh, BusLogic
Device ID = 1040h, BT946C SCSI controller
PCI index = 0h
IO @ 1060h MEM @ ec800000h
PCI Int Pin = INT A
Interrupt line = 9

thats because vmware create its own virtual SCSI adapter insteat of all
other real, furtunelly qnx4 understand this virtual adapter with driver
Fsys.aha4scsi!
http://www.qnx.com/developers/hardware_ ... tml?catego
ry=FileSys#3

But when a run this driver like
Fsys.aha4scsi aha4scsi -a1060

Host machine send message!!!!!
-------------------------
Sorry, the guest operating system has requested an unimplemented operation
be performed by the virtual SCSI adapter; either install a more up-to-date
BusLogic/Mylex device driver in the guest or remove all virtual SCSI devices
from your virtual machine configuration.
-----------------------

What is the up-to-date BusLogic/Mylex device driver?
Why old-to-date BusLogic/Mylex device driver is not work?
KBOB
Active Member
 
Posts: 39
Joined: Mon Jul 04, 2005 9:40 am

Re: QNX4+VmWare+SCSI

Postby David Gibbs » Wed Aug 10, 2005 2:55 pm

konjkov <kbob@mobilcard.ru> wrote:

I've got no clue. I just use IDE "drives" for my vmware sessions,
and haven't had a problem.

-David

I installed qnx4 under vmware workstation 5 on Windows2000 host.
After that I add to vwware virtual machine scsi drive with two qnx4
partitions as raw divice.
Running qnx4 and scan pci with utilites SHOW_PCI, it says:
Class = Mass Storage (SCSI)
Vendor ID = 104bh, BusLogic
Device ID = 1040h, BT946C SCSI controller
PCI index = 0h
IO @ 1060h MEM @ ec800000h
PCI Int Pin = INT A
Interrupt line = 9

thats because vmware create its own virtual SCSI adapter insteat of all
other real, furtunelly qnx4 understand this virtual adapter with driver
Fsys.aha4scsi!
http://www.qnx.com/developers/hardware_ ... tml?catego
ry=FileSys#3

But when a run this driver like
Fsys.aha4scsi aha4scsi -a1060

Host machine send message!!!!!
-------------------------
Sorry, the guest operating system has requested an unimplemented operation
be performed by the virtual SCSI adapter; either install a more up-to-date
BusLogic/Mylex device driver in the guest or remove all virtual SCSI devices
from your virtual machine configuration.
-----------------------

What is the up-to-date BusLogic/Mylex device driver?
Why old-to-date BusLogic/Mylex device driver is not work?



--
David Gibbs
QNX Training Services
dagibbs@qnx.com
David Gibbs
 

re:QNX4+VmWare+SCSI

Postby roscoh » Mon Jul 16, 2007 5:07 am

I've got no clue. I just use IDE "drives" for my vmware sessions,
and haven't had a problem.


Can you please explain your use of physical disks using IDE "drives" in vmware.

I'm trying to do the same but can't figure out how. I'm using vmware workstation 6 and QNX 6.3. I'm trying to add a "Hard disk" using the option "Use a physical drive" and it choses a SCSI device without giving me the option of using IDE. My device is a USB compact flash adapter, and it does exactly the same with a USB thumbdrive. Are you using a PCMCIA adapter with a CF card for your hard disk?

Regards, Ross
roscoh
New Member
 
Posts: 7
Joined: Thu Sep 16, 2004 3:34 am

Re: QNX4+VmWare+SCSI

Postby Ryan J. Allen » Mon Jul 16, 2007 12:38 pm

On 16/07/2007 1:48 AM, roscoh wrote:
Can you please explain your use of physical disks using IDE
"drives" in vmware.

In my case I'm using QNX on VMware with a physical disk, but the disk
I'm using is an actual IDE hard disk.

I'm trying to do the same but can't figure out how. I'm using vmware
workstation 6 and QNX 6.3. I'm trying to add a "Hard disk"
using the option "Use a physical drive" and it choses a
SCSI device without giving me the option of using IDE. My device is a
USB compact flash adapter, and it does exactly the same with a USB
thumbdrive. Are you using a PCMCIA adapter with a CF card for your
hard disk?

I just tried the same and saw the same. If I had to hazard a guess,
Windows treats these devices like SCSI devices more than IDE devices and
VMware won't translate between IDE and SCSI for physical disks. As far
as I know there is no Neutrino driver for the VMware SCSI controller.

--
Ryan J. Allen
QNX Software Systems
Ryan J. Allen
 

RE: Re: QNX4+VmWare+SCSI

Postby roscoh » Wed Jul 25, 2007 8:54 am

Thanks for the info. I couldn't manage to format the CF card with an image and boot from it when added to my VMware image as a SCSI disk. The solution I found was to use a PCMCIA adapter and then it allowed me to add the disk as an IDE drive.

Regards, Ross
roscoh
New Member
 
Posts: 7
Joined: Thu Sep 16, 2004 3:34 am


Return to qnx.qnx4

Who is online

Users browsing this forum: No registered users and 2 guests