Skip navigation.
Home
The QNX Community Portal

View topic - Net Crashes on Startup...

Net Crashes on Startup...

Read-only archive of qnx.qnx4 (General QNX4 Discussion Group) at inn.qnx.com

Net Crashes on Startup...

Postby Gord Sipko » Sun May 21, 2006 8:44 pm

I'm having difficulty with Net, moving to newer HP hardware running under QNX 4.25. The HP hardware uses a SIS900 lan card and when Net.sis9 is started, Net crashes and the machine locks up. In an attempt to sort out the problem, I have disabled the onboard lan card and tried a Realtek 8139 card (which has worked before with other 4.25 systems). The results with the Realtek card are the same as with the SIS900 - crash and lockup!

With both cards installed and the SIS900 enabled in the BIOS, nettrap query shows:
Net.rtl -I0 -l1 &
Net.sis9 -I0 -l2 &

Starting 'Net.rtl -I0 -l1 &' results in the following messages:
%1 + 11040 Running Net.rtl -I0 -l1
net_init: qnx_hint_attach, rtl_IrqHdlr.
Send(): Register with Net Manager failed
Version: 4.25Q Jul 18 2005
kernel fault ldt 2b8 fault d+14 IK 0085

(pid 56, '//8/bin/Net')
cs:eip=f0:ea4 ss:esp=f8:14a8 efl=12282 ds=1d ed=1d fs0 gs0
eax/0 ebx/102b8 ecx/1d edx/32cc esi/16140 edi/0 ebp/14bc
Stack (f8:146c)...

If Net is started as 'Net -v &', Runtime Error 0035, Runtime Error 0007 messages spew out.

This QNX system has all current patches installed. I have run out of ideas and things to try. Does anyone have some insight into what might be happening?

TIA,
Gord
Gord Sipko
 

Re: Net Crashes on Startup...

Postby Hugh Brown » Thu May 25, 2006 11:54 am

Please can you post the output from 'show_pci -v' as well as the output from 'sin ver'.

"Gord Sipko" <mountkidd_AT_shaw_DOT_ca@nospam.com> wrote in message news:e4qjgi$j8n$1@inn.qnx.com...
I'm having difficulty with Net, moving to newer HP hardware running under QNX 4.25. The HP hardware uses a SIS900 lan card and when Net.sis9 is started, Net crashes and the machine locks up. In an attempt to sort out the problem, I have disabled the onboard lan card and tried a Realtek 8139 card (which has worked before with other 4.25 systems). The results with the Realtek card are the same as with the SIS900 - crash and lockup!

With both cards installed and the SIS900 enabled in the BIOS, nettrap query shows:
Net.rtl -I0 -l1 &
Net.sis9 -I0 -l2 &

Starting 'Net.rtl -I0 -l1 &' results in the following messages:
%1 + 11040 Running Net.rtl -I0 -l1
net_init: qnx_hint_attach, rtl_IrqHdlr.
Send(): Register with Net Manager failed
Version: 4.25Q Jul 18 2005
kernel fault ldt 2b8 fault d+14 IK 0085

(pid 56, '//8/bin/Net')
cs:eip=f0:ea4 ss:esp=f8:14a8 efl=12282 ds=1d ed=1d fs0 gs0
eax/0 ebx/102b8 ecx/1d edx/32cc esi/16140 edi/0 ebp/14bc
Stack (f8:146c)...

If Net is started as 'Net -v &', Runtime Error 0035, Runtime Error 0007 messages spew out.

This QNX system has all current patches installed. I have run out of ideas and things to try. Does anyone have some insight into what might be happening?

TIA,
Gord
Hugh Brown
 

Re: Net Crashes on Startup...

Postby Gord Sipko » Thu May 25, 2006 7:00 pm

"Hugh Brown" <hsbrown@qnx.com> wrote in message news:e545qv$8ab$1@inn.qnx.com...
Please can you post the output from 'show_pci -v' as well as the output from 'sin ver'.

Hugh,

Thanks for the response!

QNX was installed from the 2003 Product CD with the E/G updates, plus 2005 posted Updates have also been applied. Hardware is HP552W, P4 2.0 GHz, ASUS P4S-LA, SiS650 chipset.


PROGRAM NAME VERSION DATE
/boot/sys/Proc32 Proc 4.25Q Jul 18 2005
/boot/sys/Proc32 Slib16 4.23G Oct 04 1996
/boot/sys/Slib32 Slib32 4.24B Aug 12 1997
/bin/Fsys Fsys32 4.24Y Apr 23 2002
/bin/Fsys Floppy 4.24B Aug 19 1997
/bin/Fsys.eide eide 4.25G Apr 15 2002
//8/bin/Dev32 Dev32 4.23G Oct 04 1996
//8/bin/Pipe Pipe 4.23A Feb 26 1996
//8/bin/Dev32.ansi Dev32.ansi 4.23H Nov 21 1996
//8/bin/Dev32.par Dev32.par 4.25A Jan 08 2001
//8/bin/Dev32.pty Dev32.pty 4.23G Oct 04 1996
//8/bin/Fsys.eide eide 4.25G Apr 15 2002
//8/bin/Iso9660fsys Iso9660fsys 4.23D Mar 20 2000
//8/bin/Fatfsys Fatfsys 4.26D Aug 28 2002
//8/bin/io-usb USB 1.00B Nov 14 2005
//8/bin/Net Net 4.25E Apr 24 2002

Net has a Apr 24 2002 datestamp, cksum is 3688333344 32632
Net.rtl has a Sep 30 2002 datestamp, cksum is 1117232992 44997
Net.sis9 has a Sep 19 2002 datestamp, cksum is 114920796 44768


show_pci -v ...

PCI version = 2.10

Vendor ID = 1039h, Silicon Integrated
Device ID = 650h,
PCI index = 0h
Class Code = 060000h Bridge (Host/PCI) ProgIF=0
Revision ID = 1h
Bus number = 0
Device number = 0
Function num = 0
Status Reg = 2210h
Command Reg = 7h
Header type = 0h Multi-function
BIST = 0h Build-in-self-test not supported
Latency Timer = 20h
Cache Line Size= 0h
Base Address = MEM@e8000000h,32bit length 67108864
Subsystem Vendor ID = 1043h
Subsystem ID = 8079h
Max Lat = 0ns
Min Gnt = 0ns
PCI Int Pin = 0, NC
Interrupt line = 0
Capabilities Pointer = c0h
Capability ID = 2h
Capabilities = 20h - 1f000207h

Vendor ID = 1039h, Silicon Integrated
Device ID = 1h,
PCI index = 0h
Class Code = 060400h Bridge (PCI/PCI) ProgIF=0
Revision ID = 0h
Bus number = 0
Device number = 1
Function num = 0
Status Reg = 0h
Command Reg = 7h
Header type = 1h Single-function
BIST = 0h Build-in-self-test not supported
Latency Timer = 0h
Cache Line Size= 0h
Primary Bus Number = 0
Secondary Bus Number = 1
Subordinate Bus Number = 1
Secondary Latency Timer = 0h
I/O Base = d0h
I/O Limit = d0h
Secondary Status = 2000h
Memory Base = e780h
Memory Limit = e7f0h
Prefetchable Memory Base = f000h
Prefetchable Memory Limit= feb0h
Prefetchable Base Upper 32 Bits = 0h
Prefetchable Limit Upper 32 Bits = 0h
I/O Base Upper 16 Bits = 0h
I/O Limit Upper 16 Bits = 0h
Bridge Control = 8h
PCI Int Pin = 0, NC
Interrupt line = 0

Vendor ID = 1039h, Silicon Integrated
Device ID = 8h, 85C503
PCI index = 0h
Class Code = 060100h Bridge (PCI/ISA) ProgIF=0
Revision ID = 0h
Bus number = 0
Device number = 2
Function num = 0
Status Reg = 200h
Command Reg = fh
Header type = 0h Multi-function
BIST = 0h Build-in-self-test not supported
Latency Timer = 0h
Cache Line Size= 0h
Max Lat = 0ns
Min Gnt = 0ns
PCI Int Pin = 0, NC
Interrupt line = 0

Vendor ID = 1039h, Silicon Integrated
Device ID = 7001h,
PCI index = 0h
Class Code = 0c0310h Serial Bus (Universal Serial Bus) ProgIF=16
Revision ID = 7h
Bus number = 0
Device number = 2
Function num = 2
Status Reg = 280h
Command Reg = 17h
Header type = 0h Single-function
BIST = 0h Build-in-self-test not supported
Latency Timer = 20h
Cache Line Size= 8h un-cacheable
Base Address = MEM@e7000000h,32bit length 4096
Subsystem Vendor ID = 1043h
Subsystem ID = 807ah
Max Lat = 80ns
Min Gnt = 0ns
PCI Int Pin = 4, INT D
Interrupt line = 9

Vendor ID = 1039h, Silicon Integrated
Device ID = 7001h,
PCI index = 1h
Class Code = 0c0310h Serial Bus (Universal Serial Bus) ProgIF=16
Revision ID = 7h
Bus number = 0
Device number = 2
Function num = 3
Status Reg = 280h
Command Reg = 17h
Header type = 0h Single-function
BIST = 0h Build-in-self-test not supported
Latency Timer = 20h
Cache Line Size= 8h un-cacheable
Base Address = MEM@e6800000h,32bit length 4096
Subsystem Vendor ID = 1043h
Subsystem ID = 807ah
Max Lat = 80ns
Min Gnt = 0ns
PCI Int Pin = 1, INT A
Interrupt line = 9

Vendor ID = 1039h, Silicon Integrated
Device ID = 5513h,
PCI index = 0h
Class Code = 010180h Mass Storage (IDE) ProgIF=128
Revision ID = d0h
Bus number = 0
Device number = 2
Function num = 1
Status Reg = 0h
Command Reg = 7h
Header type = 0h Multi-function
BIST = 0h Build-in-self-test not supported
Latency Timer = 80h
Cache Line Size= 0h
IO@b800h length 16 bytes
Subsystem Vendor ID = 1043h
Subsystem ID = 807ah
Max Lat = 0ns
Min Gnt = 0ns
PCI Int Pin = 0, NC
Interrupt line = 0

Vendor ID = 1039h, Silicon Integrated
Device ID = 7012h,
PCI index = 0h
Class Code = 040100h Multimedia (Audio) ProgIF=0
Revision ID = a0h
Bus number = 0
Device number = 2
Function num = 3
Status Reg = 290h
Command Reg = 5h
Header type = 0h Single-function
BIST = 0h Build-in-self-test not supported
Latency Timer = 20h
Cache Line Size= 0h
Base Address = IO@a800h length 256 bytes IO@a400h length 128 bytes
Subsystem Vendor ID = 1043h
Subsystem ID = 806ah
Max Lat = 11ns
Min Gnt = 52ns
PCI Int Pin = 3, INT C
Interrupt line = 9
Capabilities Pointer = 48h
Capability ID = 1h
Capabilities = c042h - 0h

Vendor ID = 1039h, Silicon Integrated <<<<< SiS900
Device ID = 900h,
PCI index = 0h
Class Code = 020000h Network (Ethernet) ProgIF=0
Revision ID = 90h
Bus number = 0
Device number = 3
Function num = 0
Status Reg = 290h
Command Reg = 4h
Header type = 0h Single-function
BIST = 0h Build-in-self-test not supported
Latency Timer = 20h
Cache Line Size= 0h
Base Address = IO@a000h length 256 bytes MEM@e6000000h,32bit length 4096
Subsystem Vendor ID = 1043h
Subsystem ID = 807ch
Max Lat = 11ns
Min Gnt = 52ns
PCI Int Pin = 1, INT A
Interrupt line = no connection
Capabilities Pointer = 40h
Capability ID = 1h
Capabilities = fe02h - 0h

Vendor ID = 1093h,
Device ID = 70abh,
PCI index = 0h
Class Code = ff0000h Unknown(9fbdh)
Revision ID = 0h
Bus number = 0
Device number = 14
Function num = 0
Status Reg = 280h
Command Reg = 14h
Header type = 0h Single-function
BIST = 0h Build-in-self-test not supported
Latency Timer = 20h
Cache Line Size= 8h un-cacheable
Base Address = MEM@e5800000h,32bit length 4096 MEM@e5000000h,32bit length 4096
Max Lat = 0ns
Min Gnt = 0ns
PCI Int Pin = 1, INT A
Interrupt line = no connection

Vendor ID = 10ech, <<<< RealTek 8139
Device ID = 8139h,
PCI index = 0h
Class Code = 020000h Network (Ethernet) ProgIF=0
Revision ID = 10h
Bus number = 0
Device number = 16
Function num = 0
Status Reg = 290h
Command Reg = 4h
Header type = 0h Single-function
BIST = 0h Build-in-self-test not supported
Latency Timer = 20h
Cache Line Size= 0h
Base Address = IO@9800h length 256 bytes MEM@e4800000h,32bit length 256
Subsystem Vendor ID = 1259h
Subsystem ID = 2503h
Max Lat = 64ns
Min Gnt = 32ns
PCI Int Pin = 1, INT A
Interrupt line = no connection
Capabilities Pointer = 50h
Capability ID = 1h
Capabilities = f601h - 0h

Vendor ID = 1039h, Silicon Integrated
Device ID = 6325h,
PCI index = 0h
Class Code = 030000h Display (VGA) ProgIF=0
Revision ID = 0h
Bus number = 1
Device number = 0
Function num = 0
Status Reg = 2b0h
Command Reg = 3h
Header type = 0h Single-function
BIST = 80h Selftest OK
Latency Timer = 0h
Cache Line Size= 0h
Base Address = MEM@f0000000h,Prefetchable,32bit length 134217728 MEM@e7800000h,32bit length 131072 IO@d800h length 128 bytes
Subsystem Vendor ID = 1043h
Subsystem ID = 8079h
Max Lat = 0ns
Min Gnt = 0ns
PCI Int Pin = 1, INT A
Interrupt line = 11
Capabilities Pointer = 40h
Capability ID = 1h
Capabilities = 601h - 0h
Capability ID = 2h
Capabilities = 20h - f000207h

IRQ Routing = bus=1 slot=4 device=0
Vendor ID = 1039h, Silicon Integrated
Device ID = 6325h,
INTA=3,4,5,7,9,10,11,12 Slot1:INTD Slot2:INTC Slot3:INTB
INTB=3,4,5,7,9,10,11,12 Slot1:INTA Slot2:INTD Slot3:INTC

IRQ Routing = bus=0 motherboard device=2
Vendor ID = 1039h, Silicon Integrated
Device ID = 8h, 85C503
Vendor ID = 1039h, Silicon Integrated
Device ID = 7001h,
Vendor ID = 1039h, Silicon Integrated
Device ID = 7001h,
Vendor ID = 1039h, Silicon Integrated
Device ID = 5513h,
Vendor ID = 1039h, Silicon Integrated
Device ID = 7012h,
INTA=3,4,5,7,9,10,11,12
INTB=3,4,5,7,9,10,11,12 Motherboard:INTA
INTC=3,4,5,7,9,10,11,12
INTD=3,4,5,7,9,10,11,12

IRQ Routing = bus=0 motherboard device=3
Vendor ID = 1039h, Silicon Integrated
Device ID = 900h,
INTA=3,4,5,7,9,10,11,12 Motherboard:INTB

IRQ Routing = bus=0 slot=1 device=14
Vendor ID = 1093h,
Device ID = 70abh,
INTA=3,4,5,7,9,10,11,12 Slot4:INTB Slot2:INTD Slot3:INTC
INTB=3,4,5,7,9,10,11,12 Slot2:INTA Slot3:INTD
INTC=3,4,5,7,9,10,11,12 Slot2:INTB Slot3:INTA
INTD=3,4,5,7,9,10,11,12 Slot4:INTA Slot2:INTC Slot3:INTB

IRQ Routing = bus=0 slot=2 device=15
No card configured in slot
INTA=3,4,5,7,9,10,11,12 Slot1:INTB Slot3:INTD
INTB=3,4,5,7,9,10,11,12 Slot1:INTC Slot3:INTA
INTC=3,4,5,7,9,10,11,12 Slot4:INTA Slot1:INTD Slot3:INTB
INTD=3,4,5,7,9,10,11,12 Slot4:INTB Slot1:INTA Slot3:INTC

IRQ Routing = bus=0 slot=3 device=16
Vendor ID = 10ech,
Device ID = 8139h,
INTA=3,4,5,7,9,10,11,12 Slot1:INTC Slot2:INTB
INTB=3,4,5,7,9,10,11,12 Slot4:INTA Slot1:INTD Slot2:INTC
INTC=3,4,5,7,9,10,11,12 Slot4:INTB Slot1:INTA Slot2:INTD
INTD=3,4,5,7,9,10,11,12 Slot1:INTB Slot2:INTA
Gord Sipko
 

Re: Net Crashes on Startup...

Postby Hugh Brown » Fri May 26, 2006 12:01 pm

Is there an option to turn off Plug 'n Play in the BIOS? There are no interrupts assigned to either of the network adapters.

"Gord Sipko" <mountkidd_AT_shaw_DOT_ca@nospam.com> wrote in message news:e54utr$p34$1@inn.qnx.com...

"Hugh Brown" <hsbrown@qnx.com> wrote in message news:e545qv$8ab$1@inn.qnx.com...
Please can you post the output from 'show_pci -v' as well as the output from 'sin ver'.

Hugh,

Thanks for the response!

QNX was installed from the 2003 Product CD with the E/G updates, plus 2005 posted Updates have also been applied. Hardware is HP552W, P4 2.0 GHz, ASUS P4S-LA, SiS650 chipset.


PROGRAM NAME VERSION DATE
/boot/sys/Proc32 Proc 4.25Q Jul 18 2005
/boot/sys/Proc32 Slib16 4.23G Oct 04 1996
/boot/sys/Slib32 Slib32 4.24B Aug 12 1997
/bin/Fsys Fsys32 4.24Y Apr 23 2002
/bin/Fsys Floppy 4.24B Aug 19 1997
/bin/Fsys.eide eide 4.25G Apr 15 2002
//8/bin/Dev32 Dev32 4.23G Oct 04 1996
//8/bin/Pipe Pipe 4.23A Feb 26 1996
//8/bin/Dev32.ansi Dev32.ansi 4.23H Nov 21 1996
//8/bin/Dev32.par Dev32.par 4.25A Jan 08 2001
//8/bin/Dev32.pty Dev32.pty 4.23G Oct 04 1996
//8/bin/Fsys.eide eide 4.25G Apr 15 2002
//8/bin/Iso9660fsys Iso9660fsys 4.23D Mar 20 2000
//8/bin/Fatfsys Fatfsys 4.26D Aug 28 2002
//8/bin/io-usb USB 1.00B Nov 14 2005
//8/bin/Net Net 4.25E Apr 24 2002

Net has a Apr 24 2002 datestamp, cksum is 3688333344 32632
Net.rtl has a Sep 30 2002 datestamp, cksum is 1117232992 44997
Net.sis9 has a Sep 19 2002 datestamp, cksum is 114920796 44768


show_pci -v ...

PCI version = 2.10

Vendor ID = 1039h, Silicon Integrated
Device ID = 650h,
PCI index = 0h
Class Code = 060000h Bridge (Host/PCI) ProgIF=0
Revision ID = 1h
Bus number = 0
Device number = 0
Function num = 0
Status Reg = 2210h
Command Reg = 7h
Header type = 0h Multi-function
BIST = 0h Build-in-self-test not supported
Latency Timer = 20h
Cache Line Size= 0h
Base Address = MEM@e8000000h,32bit length 67108864
Subsystem Vendor ID = 1043h
Subsystem ID = 8079h
Max Lat = 0ns
Min Gnt = 0ns
PCI Int Pin = 0, NC
Interrupt line = 0
Capabilities Pointer = c0h
Capability ID = 2h
Capabilities = 20h - 1f000207h

Vendor ID = 1039h, Silicon Integrated
Device ID = 1h,
PCI index = 0h
Class Code = 060400h Bridge (PCI/PCI) ProgIF=0
Revision ID = 0h
Bus number = 0
Device number = 1
Function num = 0
Status Reg = 0h
Command Reg = 7h
Header type = 1h Single-function
BIST = 0h Build-in-self-test not supported
Latency Timer = 0h
Cache Line Size= 0h
Primary Bus Number = 0
Secondary Bus Number = 1
Subordinate Bus Number = 1
Secondary Latency Timer = 0h
I/O Base = d0h
I/O Limit = d0h
Secondary Status = 2000h
Memory Base = e780h
Memory Limit = e7f0h
Prefetchable Memory Base = f000h
Prefetchable Memory Limit= feb0h
Prefetchable Base Upper 32 Bits = 0h
Prefetchable Limit Upper 32 Bits = 0h
I/O Base Upper 16 Bits = 0h
I/O Limit Upper 16 Bits = 0h
Bridge Control = 8h
PCI Int Pin = 0, NC
Interrupt line = 0

Vendor ID = 1039h, Silicon Integrated
Device ID = 8h, 85C503
PCI index = 0h
Class Code = 060100h Bridge (PCI/ISA) ProgIF=0
Revision ID = 0h
Bus number = 0
Device number = 2
Function num = 0
Status Reg = 200h
Command Reg = fh
Header type = 0h Multi-function
BIST = 0h Build-in-self-test not supported
Latency Timer = 0h
Cache Line Size= 0h
Max Lat = 0ns
Min Gnt = 0ns
PCI Int Pin = 0, NC
Interrupt line = 0

Vendor ID = 1039h, Silicon Integrated
Device ID = 7001h,
PCI index = 0h
Class Code = 0c0310h Serial Bus (Universal Serial Bus) ProgIF=16
Revision ID = 7h
Bus number = 0
Device number = 2
Function num = 2
Status Reg = 280h
Command Reg = 17h
Header type = 0h Single-function
BIST = 0h Build-in-self-test not supported
Latency Timer = 20h
Cache Line Size= 8h un-cacheable
Base Address = MEM@e7000000h,32bit length 4096
Subsystem Vendor ID = 1043h
Subsystem ID = 807ah
Max Lat = 80ns
Min Gnt = 0ns
PCI Int Pin = 4, INT D
Interrupt line = 9

Vendor ID = 1039h, Silicon Integrated
Device ID = 7001h,
PCI index = 1h
Class Code = 0c0310h Serial Bus (Universal Serial Bus) ProgIF=16
Revision ID = 7h
Bus number = 0
Device number = 2
Function num = 3
Status Reg = 280h
Command Reg = 17h
Header type = 0h Single-function
BIST = 0h Build-in-self-test not supported
Latency Timer = 20h
Cache Line Size= 8h un-cacheable
Base Address = MEM@e6800000h,32bit length 4096
Subsystem Vendor ID = 1043h
Subsystem ID = 807ah
Max Lat = 80ns
Min Gnt = 0ns
PCI Int Pin = 1, INT A
Interrupt line = 9

Vendor ID = 1039h, Silicon Integrated
Device ID = 5513h,
PCI index = 0h
Class Code = 010180h Mass Storage (IDE) ProgIF=128
Revision ID = d0h
Bus number = 0
Device number = 2
Function num = 1
Status Reg = 0h
Command Reg = 7h
Header type = 0h Multi-function
BIST = 0h Build-in-self-test not supported
Latency Timer = 80h
Cache Line Size= 0h
IO@b800h length 16 bytes
Subsystem Vendor ID = 1043h
Subsystem ID = 807ah
Max Lat = 0ns
Min Gnt = 0ns
PCI Int Pin = 0, NC
Interrupt line = 0

Vendor ID = 1039h, Silicon Integrated
Device ID = 7012h,
PCI index = 0h
Class Code = 040100h Multimedia (Audio) ProgIF=0
Revision ID = a0h
Bus number = 0
Device number = 2
Function num = 3
Status Reg = 290h
Command Reg = 5h
Header type = 0h Single-function
BIST = 0h Build-in-self-test not supported
Latency Timer = 20h
Cache Line Size= 0h
Base Address = IO@a800h length 256 bytes IO@a400h length 128 bytes
Subsystem Vendor ID = 1043h
Subsystem ID = 806ah
Max Lat = 11ns
Min Gnt = 52ns
PCI Int Pin = 3, INT C
Interrupt line = 9
Capabilities Pointer = 48h
Capability ID = 1h
Capabilities = c042h - 0h

Vendor ID = 1039h, Silicon Integrated <<<<< SiS900
Device ID = 900h,
PCI index = 0h
Class Code = 020000h Network (Ethernet) ProgIF=0
Revision ID = 90h
Bus number = 0
Device number = 3
Function num = 0
Status Reg = 290h
Command Reg = 4h
Header type = 0h Single-function
BIST = 0h Build-in-self-test not supported
Latency Timer = 20h
Cache Line Size= 0h
Base Address = IO@a000h length 256 bytes MEM@e6000000h,32bit length 4096
Subsystem Vendor ID = 1043h
Subsystem ID = 807ch
Max Lat = 11ns
Min Gnt = 52ns
PCI Int Pin = 1, INT A
Interrupt line = no connection
Capabilities Pointer = 40h
Capability ID = 1h
Capabilities = fe02h - 0h

Vendor ID = 1093h,
Device ID = 70abh,
PCI index = 0h
Class Code = ff0000h Unknown(9fbdh)
Revision ID = 0h
Bus number = 0
Device number = 14
Function num = 0
Status Reg = 280h
Command Reg = 14h
Header type = 0h Single-function
BIST = 0h Build-in-self-test not supported
Latency Timer = 20h
Cache Line Size= 8h un-cacheable
Base Address = MEM@e5800000h,32bit length 4096 MEM@e5000000h,32bit length 4096
Max Lat = 0ns
Min Gnt = 0ns
PCI Int Pin = 1, INT A
Interrupt line = no connection

Vendor ID = 10ech, <<<< RealTek 8139
Device ID = 8139h,
PCI index = 0h
Class Code = 020000h Network (Ethernet) ProgIF=0
Revision ID = 10h
Bus number = 0
Device number = 16
Function num = 0
Status Reg = 290h
Command Reg = 4h
Header type = 0h Single-function
BIST = 0h Build-in-self-test not supported
Latency Timer = 20h
Cache Line Size= 0h
Base Address = IO@9800h length 256 bytes MEM@e4800000h,32bit length 256
Subsystem Vendor ID = 1259h
Subsystem ID = 2503h
Max Lat = 64ns
Min Gnt = 32ns
PCI Int Pin = 1, INT A
Interrupt line = no connection
Capabilities Pointer = 50h
Capability ID = 1h
Capabilities = f601h - 0h

Vendor ID = 1039h, Silicon Integrated
Device ID = 6325h,
PCI index = 0h
Class Code = 030000h Display (VGA) ProgIF=0
Revision ID = 0h
Bus number = 1
Device number = 0
Function num = 0
Status Reg = 2b0h
Command Reg = 3h
Header type = 0h Single-function
BIST = 80h Selftest OK
Latency Timer = 0h
Cache Line Size= 0h
Base Address = MEM@f0000000h,Prefetchable,32bit length 134217728 MEM@e7800000h,32bit length 131072 IO@d800h length 128 bytes
Subsystem Vendor ID = 1043h
Subsystem ID = 8079h
Max Lat = 0ns
Min Gnt = 0ns
PCI Int Pin = 1, INT A
Interrupt line = 11
Capabilities Pointer = 40h
Capability ID = 1h
Capabilities = 601h - 0h
Capability ID = 2h
Capabilities = 20h - f000207h

IRQ Routing = bus=1 slot=4 device=0
Vendor ID = 1039h, Silicon Integrated
Device ID = 6325h,
INTA=3,4,5,7,9,10,11,12 Slot1:INTD Slot2:INTC Slot3:INTB
INTB=3,4,5,7,9,10,11,12 Slot1:INTA Slot2:INTD Slot3:INTC

IRQ Routing = bus=0 motherboard device=2
Vendor ID = 1039h, Silicon Integrated
Device ID = 8h, 85C503
Vendor ID = 1039h, Silicon Integrated
Device ID = 7001h,
Vendor ID = 1039h, Silicon Integrated
Device ID = 7001h,
Vendor ID = 1039h, Silicon Integrated
Device ID = 5513h,
Vendor ID = 1039h, Silicon Integrated
Device ID = 7012h,
INTA=3,4,5,7,9,10,11,12
INTB=3,4,5,7,9,10,11,12 Motherboard:INTA
INTC=3,4,5,7,9,10,11,12
INTD=3,4,5,7,9,10,11,12

IRQ Routing = bus=0 motherboard device=3
Vendor ID = 1039h, Silicon Integrated
Device ID = 900h,
INTA=3,4,5,7,9,10,11,12 Motherboard:INTB

IRQ Routing = bus=0 slot=1 device=14
Vendor ID = 1093h,
Device ID = 70abh,
INTA=3,4,5,7,9,10,11,12 Slot4:INTB Slot2:INTD Slot3:INTC
INTB=3,4,5,7,9,10,11,12 Slot2:INTA Slot3:INTD
INTC=3,4,5,7,9,10,11,12 Slot2:INTB Slot3:INTA
INTD=3,4,5,7,9,10,11,12 Slot4:INTA Slot2:INTC Slot3:INTB

IRQ Routing = bus=0 slot=2 device=15
No card configured in slot
INTA=3,4,5,7,9,10,11,12 Slot1:INTB Slot3:INTD
INTB=3,4,5,7,9,10,11,12 Slot1:INTC Slot3:INTA
INTC=3,4,5,7,9,10,11,12 Slot4:INTA Slot1:INTD Slot3:INTB
INTD=3,4,5,7,9,10,11,12 Slot4:INTB Slot1:INTA Slot3:INTC

IRQ Routing = bus=0 slot=3 device=16
Vendor ID = 10ech,
Device ID = 8139h,
INTA=3,4,5,7,9,10,11,12 Slot1:INTC Slot2:INTB
INTB=3,4,5,7,9,10,11,12 Slot4:INTA Slot1:INTD Slot2:INTC
INTC=3,4,5,7,9,10,11,12 Slot4:INTB Slot1:INTA Slot2:INTD
INTD=3,4,5,7,9,10,11,12 Slot1:INTB Slot2:INTA
Hugh Brown
 

Re: Net Crashes on Startup...

Postby Gord Sipko » Fri May 26, 2006 2:12 pm

There is indeed!

I disabled PnP in the BIOS and now both Net.rtl and Net.sis9 start without problems. This also cured a problem I was having with a USB 2.0 host controller card. And WinXP doesn't seem to know the difference.

Thanks a million Hugh.

Gord
"Hugh Brown" <hsbrown@qnx.com> wrote in message news:e56qkj$4gf$1@inn.qnx.com...
Is there an option to turn off Plug 'n Play in the BIOS? There are no interrupts assigned to either of the network adapters.
Gord Sipko
 


Return to qnx.qnx4

Who is online

Users browsing this forum: Bing [Bot] and 2 guests

cron