Skip navigation.
Home
The QNX Community Portal

View topic - Motherboard LAN drivers (again)

Motherboard LAN drivers (again)

Read-only archive of qnx.qnx4 (General QNX4 Discussion Group) at inn.qnx.com

Motherboard LAN drivers (again)

Postby Al Williams » Fri Sep 29, 2006 9:17 pm

Anyone know if QNX4 supports any of the following motherboard LAN drivers:

1) ASUS K8N-E motherboard, NVIDIA nForce3 250 chipset built-in 10/100 LAN.
2) ASUS K8V-X motherboard, Marvell 88E 8001 GB LAN

Didn't see them on the HW list but that doesn't always mean they aren't
around (or does it)

Thanks.

--
Allan Williams
Al Williams
 

Re: Motherboard LAN drivers (again)

Postby Igor Mazanov » Mon Oct 02, 2006 7:52 am

Hello,

There are no drivers for this NICs. Why don't you use any add-on PCI NIC,
RTL8139-based for example?

Regards,
Igor.

Al Williams wrote:
Anyone know if QNX4 supports any of the following motherboard LAN drivers:

1) ASUS K8N-E motherboard, NVIDIA nForce3 250 chipset built-in 10/100 LAN.
2) ASUS K8V-X motherboard, Marvell 88E 8001 GB LAN

Didn't see them on the HW list but that doesn't always mean they aren't
around (or does it)

Thanks.
Igor Mazanov
 

Re: Motherboard LAN drivers (again)

Postby Bert Menkveld » Mon Oct 02, 2006 11:50 am

Igor Mazanov wrote:
Hello,

There are no drivers for this NICs. Why don't you use any add-on PCI
NIC, RTL8139-based for example?

Hope you don't mind the commercial plug, but if you want the added bandwidth
of a Gigabit Ethernet adapter, you might consider our new Gigabit adapter
for QNX 4, being released this week.

--
Bert Menkveld
P. Eng.
B&E Technologies
www.betech.biz
Ph: 519-669-0950

Al Williams wrote:
Anyone know if QNX4 supports any of the following motherboard LAN
drivers: 1) ASUS K8N-E motherboard, NVIDIA nForce3 250 chipset built-in
10/100 LAN. 2) ASUS K8V-X motherboard, Marvell 88E 8001 GB LAN

Didn't see them on the HW list but that doesn't always mean they
aren't around (or does it)
Bert Menkveld
 

Re: Motherboard LAN drivers (again)

Postby Al Williams » Mon Oct 02, 2006 2:49 pm

We do, but we need 3+ networks and this saves PCI slots. Thanks.

--
Allan Williams



"Igor Mazanov" <i.mazanov@swd.ru> wrote in message
news:efqful$mgq$1@inn.qnx.com...
Hello,

There are no drivers for this NICs. Why don't you use any add-on PCI NIC,
RTL8139-based for example?

Regards,
Igor.

Al Williams wrote:
Anyone know if QNX4 supports any of the following motherboard LAN
drivers:

1) ASUS K8N-E motherboard, NVIDIA nForce3 250 chipset built-in 10/100
LAN.
2) ASUS K8V-X motherboard, Marvell 88E 8001 GB LAN

Didn't see them on the HW list but that doesn't always mean they aren't
around (or does it)

Thanks.

Al Williams
 

Re: Motherboard LAN drivers (again)

Postby Igor Mazanov » Tue Oct 03, 2006 1:38 pm

In this situation you could search for dual port NICs (two network interfaces on
the same PCI board), for example:

PILA 8472B INTEL Dual Port Server Adapter NIC (chip 82558)

It works with QNX 4 and QNX 6. I checked it in due time.

Regards,
Igor.

Al Williams wrote:
We do, but we need 3+ networks and this saves PCI slots. Thanks.
Igor Mazanov
 

Re: Motherboard LAN drivers (again)

Postby Igor Mazanov » Tue Oct 03, 2006 1:45 pm

By the way, is B&E Tech planning PCI-E adapters development/production? What's
about dual port network cards? It could be a good choice for QNX users indeed.

Regards,
Igor.

Bert Menkveld wrote:
Igor Mazanov wrote:

Hello,

There are no drivers for this NICs. Why don't you use any add-on PCI
NIC, RTL8139-based for example?


Hope you don't mind the commercial plug, but if you want the added bandwidth
of a Gigabit Ethernet adapter, you might consider our new Gigabit adapter
for QNX 4, being released this week.
Igor Mazanov
 

Re: Motherboard LAN drivers (again)

Postby Bert Menkveld » Wed Oct 04, 2006 11:53 am

Igor Mazanov wrote:
By the way, is B&E Tech planning PCI-E adapters
development/production? What's about dual port network cards? It
could be a good choice for QNX users indeed.

Thanks for the questions. We are always open to suggestions for new
products that are needed by QNX users. Unfortunately it turns out that in
real life you can't do everything you would like to.

That's the long way of saying we do not currently have any plans for
PCI-Express or dual port adapters. However, given sufficient interest that
can easily change.

Regards,

--
Bert Menkveld
P. Eng.
B&E Technologies
bert@betech.biz
Ph: 519-669-0950

Bert Menkveld wrote:
Igor Mazanov wrote:

Hello,

There are no drivers for this NICs. Why don't you use any add-on PCI
NIC, RTL8139-based for example?


Hope you don't mind the commercial plug, but if you want the added
bandwidth of a Gigabit Ethernet adapter, you might consider our new
Gigabit adapter for QNX 4, being released this week.
Bert Menkveld
 

RE: Re: Motherboard LAN drivers (again)

Postby asmart » Tue Jan 23, 2007 5:37 am

Marvell network chip is getting more and more popular in the x86 motherboard market. Besides, press released that Marvel will acuire Intel network department. I think QNX should start getting closer with Marvell for NIC support
asmart
Active Member
 
Posts: 40
Joined: Fri Nov 25, 2005 7:52 am

Marvell Yukon driver

Postby sandugandhi » Fri Oct 19, 2007 6:46 pm

Ya,,
it would be really great..even i have Marvell Yukon based ethernet on motherboard...
i have to switch to winXP jus for the net!!!
sandugandhi
New Member
 
Posts: 1
Joined: Mon Oct 15, 2007 10:15 am


Return to qnx.qnx4

Who is online

Users browsing this forum: No registered users and 4 guests