Skip navigation.
Home
The QNX Community Portal

View topic - How many long time QNX users are still around

How many long time QNX users are still around

Read-only archive of qnx.cafe (generail discussion forum) at inn.qnx.com

How many long time QNX users are still around

Postby kwschumm » Thu May 25, 2006 5:29 pm

Just curious. I've been using QNX since version 1.1 in the early 80's and
have seen big changes in the QSSL since that time. Lots of prolific QNX
users from the past seem to have moved on as the market changed and QNX
moved upscale.
kwschumm
Senior Member
 
Posts: 306
Joined: Fri Sep 17, 2004 12:46 pm

Re: How many long time QNX users are still around

Postby Mario Charest » Thu May 25, 2006 7:31 pm

"Ken Schumm" <kwschumm@qsolv.com> wrote in message
news:e54pdt$ldp$1@inn.qnx.com...
Just curious. I've been using QNX since version 1.1 in the early 80's and
have seen big changes in the QSSL since that time. Lots of prolific QNX
users from the past seem to have moved on as the market changed and QNX
moved upscale.


Seems like most have moved away, at least from newsgroup.

- Mario
Mario Charest
 

Re: How many long time QNX users are still around

Postby John Halpenny » Fri May 26, 2006 2:13 am

Mario Charest wrote:

"Ken Schumm" <kwschumm@qsolv.com> wrote in message
news:e54pdt$ldp$1@inn.qnx.com...
Just curious. I've been using QNX since version 1.1 in the early 80's and
have seen big changes in the QSSL since that time. Lots of prolific QNX
users from the past seem to have moved on as the market changed and QNX
moved upscale.


Seems like most have moved away, at least from newsgroup.

- Mario

I've used QNX since about 1988. I don't do much now, but I still check the
groups occasionally



--

John Halpenny
John Halpenny
 

Re: How many long time QNX users are still around

Postby Igor Kovalenko » Fri May 26, 2006 1:42 pm

7 messages per month in comp.os.qnx. It used to be a high-traffic group
couple years ago ;)
I'd say all the hard work QNX has put into killing off interest of
enthusiast community is paying off...

"Mario Charest" <postmaster@127.0.0.1> wrote in message
news:e550jj$q0p$1@inn.qnx.com...
"Ken Schumm" <kwschumm@qsolv.com> wrote in message
news:e54pdt$ldp$1@inn.qnx.com...
Just curious. I've been using QNX since version 1.1 in the early 80's and
have seen big changes in the QSSL since that time. Lots of prolific QNX
users from the past seem to have moved on as the market changed and QNX
moved upscale.


Seems like most have moved away, at least from newsgroup.

- Mario

Igor Kovalenko
 

Re: How many long time QNX users are still around

Postby Mario Charest » Fri May 26, 2006 6:29 pm

I'd say all the hard work QNX has put into killing off interest of
enthusiast community is paying off...

Indeed the enthusiast community or more precisely the non commercial
communicty is pretty much instinct.

That being said, i estimate that 80% of the traffic was generated by less
then 10 people, 19 times out of 20 as stat people would add ;-). So the
community was never that big of a community anyway.

Today there are more official channels to get answer (standard support plan)
so most QNX paying customer aren't showing up public. That's kind of sad in
a way because we don't get an opportunity to share knowledge.

- Mario
Mario Charest
 

Re: How many long time QNX users are still around

Postby bilcar » Fri May 26, 2006 7:00 pm

Amen to that Igor. QSSL got exactly what they wanted.

For the record I've been using QNX since 1987, version 2/3.15.F.

The last year and a half I've been out on disability. But I still play with
my own fun projects at home. I'm just now looking to jump back on the horse
and start programming again. God I miss working.

If anyone need a QNX programmer with 19 years experience, either full or
part time, just let me know.

"Igor Kovalenko" <kovalenko@comcast.net> wrote in message
news:e570hq$83u$1@inn.qnx.com...
7 messages per month in comp.os.qnx. It used to be a high-traffic group
couple years ago ;)
I'd say all the hard work QNX has put into killing off interest of
enthusiast community is paying off...

"Mario Charest" <postmaster@127.0.0.1> wrote in message
news:e550jj$q0p$1@inn.qnx.com...

"Ken Schumm" <kwschumm@qsolv.com> wrote in message
news:e54pdt$ldp$1@inn.qnx.com...
Just curious. I've been using QNX since version 1.1 in the early 80's
and
have seen big changes in the QSSL since that time. Lots of prolific QNX
users from the past seem to have moved on as the market changed and QNX
moved upscale.


Seems like most have moved away, at least from newsgroup.

- Mario



bilcar
Senior Member
 
Posts: 573
Joined: Wed Feb 04, 2004 5:50 pm
Location: Crete, IL

Re: How many long time QNX users are still around

Postby bilcar » Fri May 26, 2006 7:04 pm

More recently I agree with you. But you and I were both around during the
late 80's and early 90' when there were hundreds of posters all active on
QUICS (newsgroups for back then).

"Mario Charest" <postmaster@127.0.0.1> wrote in message
news:e57hag$jd2$1@inn.qnx.com...
I'd say all the hard work QNX has put into killing off interest of
enthusiast community is paying off...

Indeed the enthusiast community or more precisely the non commercial
communicty is pretty much instinct.

That being said, i estimate that 80% of the traffic was generated by less
then 10 people, 19 times out of 20 as stat people would add ;-). So the
community was never that big of a community anyway.

Today there are more official channels to get answer (standard support
plan) so most QNX paying customer aren't showing up public. That's kind
of sad in a way because we don't get an opportunity to share knowledge.

- Mario

bilcar
Senior Member
 
Posts: 573
Joined: Wed Feb 04, 2004 5:50 pm
Location: Crete, IL

Re: How many long time QNX users are still around

Postby kwschumm » Fri May 26, 2006 7:42 pm

"Igor Kovalenko" <kovalenko@comcast.net> wrote in message
news:e570hq$83u$1@inn.qnx.com...
7 messages per month in comp.os.qnx. It used to be a high-traffic group
couple years ago ;)
I'd say all the hard work QNX has put into killing off interest of
enthusiast community is paying off...

I'm inclined to agree. From all the QNX conferences I probably met hundreds
of QNX users over the years. Sad to see them all gone to the dark side.
kwschumm
Senior Member
 
Posts: 306
Joined: Fri Sep 17, 2004 12:46 pm

Re: How many long time QNX users are still around

Postby John Halpenny » Mon May 29, 2006 2:41 am

Mario Charest wrote:

I'd say all the hard work QNX has put into killing off interest of
enthusiast community is paying off...

Indeed the enthusiast community or more precisely the non commercial
communicty is pretty much instinct.

That being said, i estimate that 80% of the traffic was generated by less
then 10 people, 19 times out of 20 as stat people would add ;-). So the
community was never that big of a community anyway.

Today there are more official channels to get answer (standard support plan)
so most QNX paying customer aren't showing up public. That's kind of sad in
a way because we don't get an opportunity to share knowledge.

I've looked in on various news groups over the years, and they all seem to
consist of a few regulars and even fewer newcomers. Perhaps it is the nature of
newsgroups these days, and the youngsters are going to other chamnnels, or other
activities.
--

John Halpenny
John Halpenny
 

Re: How many long time QNX users are still around

Postby Guest » Mon May 29, 2006 12:09 pm

Here's one who has been consistently using QNX (since 1987) who hasn't gone over to the "dark
side". I will probably retire before I get to that stage (which means I probably never will). I
do, however, dabble with Linux, but I mainly occupy myself with QNX4, with brief forays into
QNX6 for the odd driver or two.

I also regularly read these newsgroups...

Geoff Roberts.

Ken Schumm wrote:
"Igor Kovalenko" <kovalenko@comcast.net> wrote in message
news:e570hq$83u$1@inn.qnx.com...

7 messages per month in comp.os.qnx. It used to be a high-traffic group
couple years ago ;)
I'd say all the hard work QNX has put into killing off interest of
enthusiast community is paying off...


I'm inclined to agree. From all the QNX conferences I probably met hundreds
of QNX users over the years. Sad to see them all gone to the dark side.

Guest
 

Re: How many long time QNX users are still around

Postby bilcar » Mon May 29, 2006 2:10 pm

Or there just aren't any "youngsters".

"John Halpenny" <j.halpenny@Rogers.com> wrote in message
news:447A5F66.31C62CB1@Rogers.com...
I've looked in on various news groups over the years, and they all seem to
consist of a few regulars and even fewer newcomers. Perhaps it is the
nature of
newsgroups these days, and the youngsters are going to other chamnnels, or
other
activities.
--

John Halpenny

bilcar
Senior Member
 
Posts: 573
Joined: Wed Feb 04, 2004 5:50 pm
Location: Crete, IL

Re: How many long time QNX users are still around

Postby John Nagle » Tue May 30, 2006 12:29 am

Bill Caroselli wrote:
Or there just aren't any "youngsters".

Our experience with Team Overbot, our DARPA Grand Challenge
team, was that young people viewed learning QNX as having
negative career value. This was a real problem for us.
If we had to do it again, we would have used Linux.

John Nagle
John Nagle
 

Re: How many long time QNX users are still around

Postby Marty Doane » Tue May 30, 2006 4:13 pm

Still here full time with QNX 6. Started with 4.24.

Marty Doane

"Ken Schumm" <kwschumm@qsolv.com> wrote in message
news:e54pdt$ldp$1@inn.qnx.com...
Just curious. I've been using QNX since version 1.1 in the early 80's and
have seen big changes in the QSSL since that time. Lots of prolific QNX
users from the past seem to have moved on as the market changed and QNX
moved upscale.

Marty Doane
 

RE: Re: How many long time QNX users are still around

Postby ianc » Tue May 30, 2006 10:35 pm

Been using QNX since 1992. This is in a PC based application, not embedded. Started with QNX2 - did 18 months development and then we made the big conversion to QNX4. Currently using QNX 4.25

We don't see any need to go to 6. However I must say that if I knew the political hassles we were going to meet I would have pushed management to go for Linux. Not as good technically but far less trouble at the marketing and tech support level. I don't know what it's like in the US and Canada but here in Oz QNX people are as rare as hen's teeth. QNX huh? is the usual response.

Our company makes alarm control systems and we have two streams of management software; one QNX based and one Windows based. My observation is that my team (the QNX one) gets on with the job at hand; the Windows team is constantly learning new tools and fads and consequently is nowhere near as productive.

QNX on the CV is useless but I'm at the age where I no longer care. In eight months time I'm going for a lifestyle change to raise alpacas and if I don't see another software project ever!
ianc
Active Member
 
Posts: 80
Joined: Wed Jan 22, 2003 6:04 am
Location: Bendigo, Australia

Re: How many long time QNX users are still around

Postby Pavel Kycina » Wed May 31, 2006 6:33 am

"Ken Schumm" <kwschumm@qsolv.com> wrote in message
news:e54pdt$ldp$1@inn.qnx.com...
Just curious. I've been using QNX since version 1.1 in the early 80's and
have seen big changes in the QSSL since that time. Lots of prolific QNX
users from the past seem to have moved on as the market changed and QNX
moved upscale.



I am still here. Struggling with both QNX 4.25 and QNX6.3

Pavol Kycina
Pavel Kycina
 

Next

Return to qnx.cafe

Who is online

Users browsing this forum: No registered users and 1 guest