Skip navigation.
Home
The QNX Community Portal

View topic - How to Config PCMCIA Card Realtek 8139 Family

How to Config PCMCIA Card Realtek 8139 Family

For the old QNX2 and QNX4 RTOS

How to Config PCMCIA Card Realtek 8139 Family

Postby nitinkv » Thu Oct 02, 2003 10:04 am

We have IBM Laptop. We have to configure this card for LAN connection.
It has 2 Card Buses. with controller : O2 Micro OZ6832/6833 CardBus Controller.

And the PCMCIA Card has the Realtek-8139 Family chipset. which requires driver Net.rtl. And this driver is available in the QNX425PatchE.tar file. This file is available for download. And after installing this patch, u will get the Net.rtl driver.

Now don't know the exact procedure to install the card.

can anybody help in this regard...??????

Vikas, Nitin
nitinkv
New Member
 
Posts: 1
Joined: Fri Sep 19, 2003 7:19 am

Postby chentao » Wed Nov 05, 2003 3:07 pm

i have the same question .
chentao
New Member
 
Posts: 1
Joined: Wed Nov 05, 2003 2:51 pm

Postby noc » Thu Nov 06, 2003 5:39 pm

After you plugin the card, do "pin" to see if it "sees" the card.

Those two documents will give you an overview:
/etc/readme/pcmcia
/etc/readme/technotes/pcmcia

BTW, if I remember correctly, QNX4 does NOT support CardBus. So, you need to make sure you are having an old 16 bit PCMCIA card.
noc
Senior Member
 
Posts: 1634
Joined: Sat Jul 06, 2002 4:34 am


Return to QNX2 and QNX4

Who is online

Users browsing this forum: No registered users and 2 guests

cron