Skip navigation.
Home
The QNX Community Portal

View topic - QNX 4.25 Net Drivers with ability to change mac address

QNX 4.25 Net Drivers with ability to change mac address

For the old QNX2 and QNX4 RTOS

QNX 4.25 Net Drivers with ability to change mac address

Postby jim0714 » Thu Nov 29, 2012 9:45 pm

Good Afternoon,

QNX4.25 Question:
Is there a list of Network Device Drivers that have the ability to change the MAC address from the command line?
jim0714
New Member
 
Posts: 1
Joined: Wed Nov 08, 2006 9:44 pm

Re: QNX 4.25 Net Drivers with ability to change mac address

Postby maschoen » Fri Nov 30, 2012 3:54 am

I've never see such a list, but here is what I figured out by using the "use" command
and cross referencing against the QNX 4 hardware database.
I can't guarantee that the parameter will work, but this is a starting point.

Net.crys8900
CS8900
CS8920

Net.epic
83C170 also known as 943
83C171 SMC83C171 chipsetx09
83C175 SMC83C175 chipset

Net.ether82557
82551QM 82551QM chipset
82557 82557 chipset
82558 82558 chipset
82558ER 82558 chipset
82559 82559 chipset
82559A 82559A chipset
82559A VE 82559A PRO/100 VE chipset
82559B 82559B chipset
82559C 82559C chipset
82559ER 82559 Embedded chipset
82559VE 82559 chipset
82562 82562 chipset
82562EM 82562EM chipset
82801 82801 chipset

Net.ns83815
DP83815 DP83815-compatible network cards

Net.rtl
RTL8139A 8139A chipset
RTL8139A 8139B chipset
RTL8139A 8139D chipset
SMC1211 SMC1211

Net.sis9
SIS900 SiS

Net.sym
?? None listed

Net.tulip
DE434-AA EtherWORKS Turbo PCI TP (21040 based)
DE435-AA EtherWORKS Turbo PCI Combo (21040 based)
DE530CT PCI, 21040 based, 714-455-1688
SMC8432-21040 EtherPower 10BASET PCI Ethernet Adapter
SMC8432-21041 EtherPower 10BASET PCI Ethernet Adapter
SMC8434BT 2 x 21040 based 10MB ethernet on one card. EtherPower2 Dual Channel Combo PCI Ethernet Adapter
SMC9332-21140 EtherPower 10/100 Fast Ethernet Adapter

Net.via
Via Rhine Via
Via Rhine II Via
Via VT6105 Via
maschoen
QNX Master
 
Posts: 2640
Joined: Wed Jun 25, 2003 5:18 pm


Return to QNX2 and QNX4

Who is online

Users browsing this forum: No registered users and 3 guests