Skip navigation.
Home
The QNX Community Portal

View topic - UEFI machine and QNX4 installation - no way?

UEFI machine and QNX4 installation - no way?

For the old QNX2 and QNX4 RTOS

UEFI machine and QNX4 installation - no way?

Postby Pilotek » Tue Aug 15, 2017 11:23 am

Hello friends,

is it possible to install QNX4 on these-days machines "without" BIOS - I mean with UEFI without Setup option "Legacy BIOS" (I think this option is in UEFI Setup only if the UEFI has CSM = Compatibility Support Module)? I am trying that, there is a setting in UEFI for SATA HDD controller mode "IDE", but installation terminates on each step of HW detection where (I think) it looks for Legacy BIOS. The first thing to terminate is "PCI BIOS" detection. Yes, you can set installation to "Diagnostic mode" and uncheck all "problematic" HW components but you need at least CD drive, HDD drive and NIC and on some of they the installation terminates too.

To be exact, installation "sees" EIDE Controller, but when launching Fsys.atapi (for CD drive and HDD), Fsys cannot see any drives.

Question #2: Which are the latest Intel mainboard chipsets, that are supported by either classic BIOS (MBR) or if they have already UEFI (GPT) - they have CSM (option "Legacy BIOS" in their Setup)?

Question #3:
Or which are the latest UEFI versions (AMI, Phenix) with CSM ("Legacy BIOS" option in their Setup)?

I am afraid that no Intel Core i3/i5/i7 machines are compatible with QNX4 OS :( Am I right?

Please help.
Pilotek
Senior Member
 
Posts: 124
Joined: Thu Jan 25, 2007 3:52 pm

Re: UEFI machine and QNX4 installation - no way?

Postby Pilotek » Tue Sep 05, 2017 12:26 pm

Author of this thread: I tried installing (or booting off already QNX4 installed hard disk) QNX 4.25 on some new machines based on EFI/UEFI. Even when there are "Legacy boot" options in UEFI (e.g. HP ProDesk), installing QNX4 (or booting off already installed hard drive) hangs/crashes (SIGSEGV) on Fsys.atapi.

It seems that all UEFI machines behave that way, that QNX4's Fsys.atapi cannot "see" any hard drives and thus cannot see even installation CD drive filesystem (installation batch ends up with popup window that "Installer needs CD drive to install QNX").

Is there a way how to resolve that problem?
Pilotek
Senior Member
 
Posts: 124
Joined: Thu Jan 25, 2007 3:52 pm

Re: UEFI machine and QNX4 installation - no way?

Postby Tim » Tue Sep 05, 2017 5:35 pm

This might be a long shot but have you seen this thread on Foundry27
http://community.qnx.com/sf/discussion/ ... post116983

and the release notes for Proc32 4.25R
http://community.qnx.com/sf/wiki/do/vie ... sForProc32

Hopefully this is what you need

Tim
Tim
Senior Member
 
Posts: 1388
Joined: Wed Mar 10, 2004 12:28 am

Re: UEFI machine and QNX4 installation - no way?

Postby Pilotek » Fri Sep 29, 2017 12:46 pm

Thank you very much Tim!

We found there also "new" QNX 4.25 Patch H (2015) installation CD, which works OK on our new UEFI computer. Now I must analyze what is different (newer).

Thank you guys from QNX Community and/or foundry27 for still working on QNX 4 system.
Pilotek
Senior Member
 
Posts: 124
Joined: Thu Jan 25, 2007 3:52 pm


Return to QNX2 and QNX4

Who is online

Users browsing this forum: Google Adsense [Bot] and 2 guests