Skip navigation.
Home
The QNX Community Portal

View topic - devb-eide cause halt system

devb-eide cause halt system

Discussion about the QNX6 OS.

devb-eide cause halt system

Postby gopyan » Mon Apr 11, 2011 5:17 am

Hello Friends.


Please help me to solve problem. I have crate with HDD toshiba mk6028gal (system architecture - x86) . I try to boot from my usb flash. When bootscript reach to devb-eide then system is halt. I try to invoke devb-eide with parameters (disable dma)

devb-eide nbmstr blk automount=hd0t77 ,

but problem still unresolved.
Please help me out .
gopyan
Active Member
 
Posts: 64
Joined: Tue Mar 02, 2010 1:39 pm

RE: devb-eide cause halt system

Postby gopyan » Mon Apr 11, 2011 5:53 am

This is output of pci -vvv command

PCI version = 2.10

Class = Bridge (Host/PCI)
Vendor ID = 8086h, Intel Corporation
Device ID = 3580h, 82852/82855 GM/GME/PM/GMV Processor to I/O Controller
PCI index = 0h
Class Codes = 060000h
Revision ID = 2h
Bus number = 0
Device number = 0
Function num = 0
Status Reg = 2090h
Command Reg = 106h
I/O space access disabled
Memory space access enabled
Bus Master enabled
Special Cycle operations ignored
Memory Write and Invalidate disabled
Palette Snooping disabled
Parity Error Response disabled
Data/Address stepping disabled
SERR# driver enabled
Fast back-to-back transactions to different agents disabled
Header type = 0h Multi-function
BIST = 0h Build-in-self-test not supported
Latency Timer = 0h
Cache Line Size= 0h
Subsystem Vendor ID = 8086h
Subsystem ID = 358ch
Max Lat = 0ns
Min Gnt = 0ns
PCI Int Pin = NC
Interrupt line = 0
CPU Interrupt = 0h
Capabilities Pointer = 40h
Capability ID = 9h - Vendor Specific
Capabilities = 8105h - 0h
Capability ID = 2h - AGP
Capabilities = 20h - 1f000217h
Device Dependent Registers:
0x040: 09a0 0581 0000 0000 0000 0000 0228 000e
0x050: 0000 3000 0000 0000 0010 1111 0000 1111
0x060: 0a38 0302 0200 0800 0000 0000 0000 0000
0x070: 0209 0000 1260 0002 0000 8000 0000 0000
0x080: 0200 0066 0000 0000 0000 0000 0000 0000
0x090: 0000 0000 0000 0000 0000 0000 0000 0000
0x0a0: 0200 2000 1702 001f 0000 0000 0000 0000
0x0b0: 0000 f0e9 0000 0000 0000 0000 0000 0000
0x0c0: 0000 0000 0000 0000 0000 0000 0000 0000
...
0x0f0: 0000 0000 0000 0000 0000 0200 0901 0000

Class = System Peripherals (Other)
Vendor ID = 8086h, Intel Corporation
Device ID = 3584h, 82852/82855 GM/GME/PM/GMV Processor to I/O Controller
PCI index = 0h
Class Codes = 088000h
Revision ID = 2h
Bus number = 0
Device number = 0
Function num = 1
Status Reg = 80h
Command Reg = 6h
I/O space access disabled
Memory space access enabled
Bus Master enabled
Special Cycle operations ignored
Memory Write and Invalidate disabled
Palette Snooping disabled
Parity Error Response disabled
Data/Address stepping disabled
SERR# driver disabled
Fast back-to-back transactions to different agents disabled
Header type = 0h Single-function
BIST = 0h Build-in-self-test not supported
Latency Timer = 0h
Cache Line Size= 0h
Subsystem Vendor ID = 8086h
Subsystem ID = 3584h
Max Lat = 0ns
Min Gnt = 0ns
PCI Int Pin = NC
Interrupt line = 0
CPU Interrupt = 0h
Device Dependent Registers:
0x040: 1020 2020 0000 0000 0000 0000 0000 0000
0x050: 3377 0000 0000 0000 0000 0000 0000 0000
0x060: 0542 006a 0000 0000 3004 f110 0000 0000
0x070: 7199 2020 0100 0000 74e9 1f00 0000 0000
0x080: 6900 af00 bc01 0000 1000 0000 0000 0000
0x090: 0000 0000 0000 0000 0000 0000 5300 ca1b
0x0a0: 1000 0000 0080 0324 8855 0000 0000 0000
0x0b0: 0000 0000 7cf2 0700 c6e3 0000 698f 9900
0x0c0: 0300 0000 0000 0000 0000 0000 0000 0000
0x0d0: 0000 0000 0000 0000 0000 0000 0000 0000
...
0x0f0: 0000 0000 0000 0000 0000 0000 0000 0000

Class = System Peripherals (Other)
Vendor ID = 8086h, Intel Corporation
Device ID = 3585h, 82852/82855 GM/GME/PM/GMV Processor to I/O Controller
PCI index = 0h
Class Codes = 088000h
Revision ID = 2h
Bus number = 0
Device number = 0
Function num = 3
Status Reg = 80h
Command Reg = 6h
I/O space access disabled
Memory space access enabled
Bus Master enabled
Special Cycle operations ignored
Memory Write and Invalidate disabled
Palette Snooping disabled
Parity Error Response disabled
Data/Address stepping disabled
SERR# driver disabled
Fast back-to-back transactions to different agents disabled
Header type = 0h Multi-function
BIST = 0h Build-in-self-test not supported
Latency Timer = 0h
Cache Line Size= 0h
Subsystem Vendor ID = 8086h
Subsystem ID = 3585h
Max Lat = 0ns
Min Gnt = 0ns
PCI Int Pin = NC
Interrupt line = 0
CPU Interrupt = 0h
Device Dependent Registers:
0x040: 0404 0000 0000 1111 3c53 5e09 515c 0952
0x050: 5d09 0000 0000 0000 0108 392d 343a 030c
0x060: 0000 0000 0000 0000 0404 0000 313c 0000
0x070: 0000 0000 0404 4127 e7c7 0f47 2a12 8402
0x080: ff1f 0000 ef00 0000 0000 0000 0000 0000
0x090: 0000 0000 0000 0000 0000 0000 0000 0000
0x0a0: 0000 0000 0000 0000 0080 131f 0000 0000
0x0b0: 0000 0000 8002 0000 0000 0000 0000 0000
0x0c0: 0704 0000 0000 0000 0000 0000 0000 0000
0x0d0: 0100 2102 0000 0000 08c3 00ff 2500 0000
0x0e0: 0000 1c00 9800 9c00 0000 0000 0004 0000
0x0f0: 0000 00c0 0000 0000 0000 0000 0000 0000

Class = Bridge (PCI/PCI)
Vendor ID = 8086h, Intel Corporation
Device ID = 3581h, 82852/82855 GM/GME/PM/GMV Processor to AGP Controller
PCI index = 0h
Class Codes = 060400h
Revision ID = 2h
Bus number = 0
Device number = 1
Function num = 0
Status Reg = a0h
Command Reg = 4h
I/O space access disabled
Memory space access disabled
Bus Master enabled
Special Cycle operations ignored
Memory Write and Invalidate disabled
Palette Snooping disabled
Parity Error Response disabled
Data/Address stepping disabled
SERR# driver disabled
Fast back-to-back transactions to different agents disabled
Header type = 1h Single-function
BIST = 0h Build-in-self-test not supported
Latency Timer = 40h
Cache Line Size= 0h
Primary Bus Number = 0
Secondary Bus Number = 1
Subordinate Bus Number = 1
Secondary Latency Timer = 40h
I/O Base = f0h
I/O Limit = 0h
Secondary Status = 22a0h
Memory Base = fff0h
Memory Limit = 0h
Prefetchable Memory Base = fff0h
Prefetchable Memory Limit= 0h
Prefetchable Base Upper 32 Bits = 0h
Prefetchable Limit Upper 32 Bits = 0h
I/O Base Upper 16 Bits = 0h
I/O Limit Upper 16 Bits = 0h
Bridge Control = 0h
PCI Int Pin = NC
Interrupt line = 0
CPU Interrupt = 0h
Device Dependent Registers:
0x040: 0000 0000 0000 0000 0000 0000 0000 0000
...
0x0f0: 0000 0000 0000 0000 0000 0000 0000 0000

Class = Display (VGA)
Vendor ID = 8086h, Intel Corporation
Device ID = 3582h, 82852/855GM Integrated Graphics Device
PCI index = 0h
Class Codes = 030000h
Revision ID = 2h
Bus number = 0
Device number = 2
Function num = 0
Status Reg = 90h
Command Reg = 7h
I/O space access enabled
Memory space access enabled
Bus Master enabled
Special Cycle operations ignored
Memory Write and Invalidate disabled
Palette Snooping disabled
Parity Error Response disabled
Data/Address stepping disabled
SERR# driver disabled
Fast back-to-back transactions to different agents disabled
Header type = 0h Single-function
BIST = 0h Build-in-self-test not supported
Latency Timer = 0h
Cache Line Size= 0h
PCI Mem Address = d0000000h prefetchable 32bit length 134217728 enabled
PCI Mem Address = dfc80000h 32bit length 524288 enabled
PCI IO Address = dc38h length 8 enabled
Subsystem Vendor ID = 8086h
Subsystem ID = 358eh
Max Lat = 0ns
Min Gnt = 0ns
PCI Int Pin = INT A
Interrupt line = 11
CPU Interrupt = bh
Capabilities Pointer = d0h
Capability ID = 1h - Power Management
Capabilities = 221h - 0h
Device Dependent Registers:
0x040: 09a0 0581 0040 0000 0000 0000 0000 0000
0x050: 0000 3000 0000 0000 0000 0200 0000 0000
0x060: 0000 0000 0000 0000 0000 0000 0000 0000
...
0x0a0: 1000 0000 0080 0324 9c5b 0000 0000 0000
0x0b0: 0000 0000 f031 0800 8000 0100 5dd3 9d00
0x0c0: 0704 0000 0000 0000 0000 0000 0000 0000
0x0d0: 0100 2102 0000 0000 08c3 00ff 2500 0000
0x0e0: 0000 1c00 9800 9c00 0000 0000 0004 0000
0x0f0: 0000 0000 0000 0000 0000 0000 0000 0000

Class = Bridge (PCI/PCI)
Vendor ID = 8086h, Intel Corporation
Device ID = 25aeh, 6300ESB 64-bit PCI-X Bridge
PCI index = 0h
Class Codes = 060400h
Revision ID = 2h
Bus number = 0
Device number = 28
Function num = 0
Status Reg = 8030h
Command Reg = 7h
I/O space access enabled
Memory space access enabled
Bus Master enabled
Special Cycle operations ignored
Memory Write and Invalidate disabled
Palette Snooping disabled
Parity Error Response disabled
Data/Address stepping disabled
SERR# driver disabled
Fast back-to-back transactions to different agents disabled
Header type = 1h Single-function
BIST = 0h Build-in-self-test not supported
Latency Timer = 40h
Cache Line Size= 10h un-cacheable
Primary Bus Number = 0
Secondary Bus Number = 2
Subordinate Bus Number = 2
Secondary Latency Timer = 40h
I/O Base = e0h
I/O Limit = e0h
Secondary Status = 22a0h
Memory Base = dfe0h
Memory Limit = dff0h
Prefetchable Memory Base = fff1h
Prefetchable Memory Limit= 1h
Prefetchable Base Upper 32 Bits = 0h
Prefetchable Limit Upper 32 Bits = 0h
I/O Base Upper 16 Bits = 0h
I/O Limit Upper 16 Bits = 0h
Bridge Control = 0h
PCI Int Pin = NC
Interrupt line = 0
CPU Interrupt = 0h
Capabilities Pointer = 50h
Capability ID = 7h - PCI-X
Capabilities = 41h - 100e0h
Device Dependent Registers:
0x040: 4031 0800 0000 0000 0000 0000 0000 0000
0x050: 0700 4100 e000 0100 ffff 0000 ffff 0000
0x060: 1004 e000 0000 0000 0000 0000 0f0a 0000
0x070: 0000 0100 0000 0000 02e0 0000 0000 0000
0x080: f080 0030 84e0 0000 2004 0000 0000 0000
0x090: 0000 0000 0000 0000 22fe e83e 2000 0000
0x0a0: 0000 0000 0000 0000 0000 0000 0000 0000
...
0x0e0: 0000 0000 3202 0000 0000 0000 0000 0000
0x0f0: 0000 0000 0000 0000 2121 2131 7b7b ffbf

Class = Serial Bus (Universal Serial Bus)
Vendor ID = 8086h, Intel Corporation
Device ID = 25a9h, 6300ESB USB Universal Host Controller
PCI index = 0h
Class Codes = 0c0300h
Revision ID = 2h
Bus number = 0
Device number = 29
Function num = 0
Status Reg = 280h
Command Reg = 5h
I/O space access enabled
Memory space access disabled
Bus Master enabled
Special Cycle operations ignored
Memory Write and Invalidate disabled
Palette Snooping disabled
Parity Error Response disabled
Data/Address stepping disabled
SERR# driver disabled
Fast back-to-back transactions to different agents disabled
Header type = 0h Multi-function
BIST = 0h Build-in-self-test not supported
Latency Timer = 0h
Cache Line Size= 0h
PCI IO Address = dca0h length 32 enabled
Subsystem Vendor ID = 8086h
Subsystem ID = 25a9h
Max Lat = 0ns
Min Gnt = 0ns
PCI Int Pin = INT A
Interrupt line = 11
CPU Interrupt = bh
Device Dependent Registers:
0x040: 0000 0000 0000 0000 0000 0000 0000 0000
...
0x060: 1000 0000 0000 0000 0000 0000 0000 0000
0x070: 0000 0000 0000 0000 0000 0000 0000 0000
...
0x0c0: 100f 0000 0000 0000 0000 0000 0000 0000
0x0d0: 0000 0000 0000 0000 0000 0000 0000 0000
...
0x0f0: 0000 0000 0000 0000 660f 0000 0000 0000

Class = Serial Bus (Universal Serial Bus)
Vendor ID = 8086h, Intel Corporation
Device ID = 25aah, 6300ESB USB Universal Host Controller
PCI index = 0h
Class Codes = 0c0300h
Revision ID = 2h
Bus number = 0
Device number = 29
Function num = 1
Status Reg = 280h
Command Reg = 5h
I/O space access enabled
Memory space access disabled
Bus Master enabled
Special Cycle operations ignored
Memory Write and Invalidate disabled
Palette Snooping disabled
Parity Error Response disabled
Data/Address stepping disabled
SERR# driver disabled
Fast back-to-back transactions to different agents disabled
Header type = 0h Single-function
BIST = 0h Build-in-self-test not supported
Latency Timer = 0h
Cache Line Size= 0h
PCI IO Address = dcc0h length 32 enabled
Subsystem Vendor ID = 8086h
Subsystem ID = 25a9h
Max Lat = 0ns
Min Gnt = 0ns
PCI Int Pin = INT B
Interrupt line = 9
CPU Interrupt = 9h
Device Dependent Registers:
0x040: 0000 0000 0000 0000 0000 0000 0000 0000
...
0x060: 1000 0000 0000 0000 0000 0000 0000 0000
0x070: 0000 0000 0000 0000 0000 0000 0000 0000
...
0x0c0: 100f 0000 0000 0000 0000 0000 0000 0000
0x0d0: 0000 0000 0000 0000 0000 0000 0000 0000
...
0x0f0: 0000 0000 0000 0000 660f 0000 0000 0000

Class = System Peripherals (Other)
Vendor ID = 8086h, Intel Corporation
Device ID = 25abh, 6300ESB Watchdog Timer
PCI index = 0h
Class Codes = 088000h
Revision ID = 2h
Bus number = 0
Device number = 29
Function num = 4
Status Reg = 280h
Command Reg = 2h
I/O space access disabled
Memory space access enabled
Bus Master disabled
Special Cycle operations ignored
Memory Write and Invalidate disabled
Palette Snooping disabled
Parity Error Response disabled
Data/Address stepping disabled
SERR# driver disabled
Fast back-to-back transactions to different agents disabled
Header type = 0h Single-function
BIST = 0h Build-in-self-test not supported
Latency Timer = 0h
Cache Line Size= 0h
PCI Mem Address = dfc7f4f0h 32bit length 16 enabled
Subsystem Vendor ID = 8086h
Subsystem ID = 25abh
Max Lat = 0ns
Min Gnt = 0ns
PCI Int Pin = NC
Interrupt line = 0
CPU Interrupt = 0h
Device Dependent Registers:
0x040: 0000 0000 0000 0000 0000 0000 0000 0000
...
0x0f0: 0000 0000 0000 0000 660f 0000 0000 0000

Class = System Peripherals (PIC)
Vendor ID = 8086h, Intel Corporation
Device ID = 25ach, 6300ESB I/O Advanced Programmable Interrupt Controller
PCI index = 0h
Class Codes = 080020h
Revision ID = 2h
Bus number = 0
Device number = 29
Function num = 5
Status Reg = 10h
Command Reg = 6h
I/O space access disabled
Memory space access enabled
Bus Master enabled
Special Cycle operations ignored
Memory Write and Invalidate disabled
Palette Snooping disabled
Parity Error Response disabled
Data/Address stepping disabled
SERR# driver disabled
Fast back-to-back transactions to different agents disabled
Header type = 0h Single-function
BIST = 0h Build-in-self-test not supported
Latency Timer = 0h
Cache Line Size= 0h
Subsystem Vendor ID = 8086h
Subsystem ID = 25ach
Max Lat = 0ns
Min Gnt = 0ns
PCI Int Pin = NC
Interrupt line = 0
CPU Interrupt = 0h
Capabilities Pointer = 50h
Capability ID = 7h - PCI-X
Capabilities = 0h - 100edh
Device Dependent Registers:
0x040: 0080 0000 0000 c1fe 0000 0000 0000 0000
0x050: 0700 0000 ed00 0100 0000 0000 0000 0000
0x060: 0000 0000 0000 0000 0000 0000 0000 0000
...
0x080: ffff ffff ffff ffff ffff ffff ffff ffff
...
0x0b0: 0000 0000 0000 0000 0000 0000 0000 0000
0x0c0: ffff ffff ffff ffff ffff ffff ffff ffff
0x0d0: 0000 0000 0000 0000 0000 0000 0000 0000
...
0x0f0: 0000 0000 0000 0000 660f 0000 0000 0000

Class = Serial Bus (Universal Serial Bus)
Vendor ID = 8086h, Intel Corporation
Device ID = 25adh, 6300ESB USB2 Enhanced Host Controller
PCI index = 0h
Class Codes = 0c0320h
Revision ID = 2h
Bus number = 0
Device number = 29
Function num = 7
Status Reg = 290h
Command Reg = 6h
I/O space access disabled
Memory space access enabled
Bus Master enabled
Special Cycle operations ignored
Memory Write and Invalidate disabled
Palette Snooping disabled
Parity Error Response disabled
Data/Address stepping disabled
SERR# driver disabled
Fast back-to-back transactions to different agents disabled
Header type = 0h Single-function
BIST = 0h Build-in-self-test not supported
Latency Timer = 0h
Cache Line Size= 0h
PCI Mem Address = dfc7f800h 32bit length 1024 enabled
Subsystem Vendor ID = 8086h
Subsystem ID = 25adh
Max Lat = 0ns
Min Gnt = 0ns
PCI Int Pin = INT D
Interrupt line = 11
CPU Interrupt = bh
Capabilities Pointer = 50h
Capability ID = 1h - Power Management
Capabilities = c9c2h - 0h
Capability ID = ah - Debug Port
Capabilities = 2080h - 0h
Device Dependent Registers:
0x040: 0000 0000 0000 0000 0000 0000 0000 0000
0x050: 0158 c2c9 0000 0000 0a00 8020 0000 0000
0x060: 2020 1f00 0000 0000 0100 0001 0000 0000
0x070: 0000 df03 0000 0000 0000 0000 0000 0000
0x080: 0100 0000 0100 0000 0000 0000 0000 0000
0x090: 0000 0000 0000 0000 0000 0000 0000 0000
...
0x0d0: 0000 0000 0000 0000 0000 0000 0000 ef00
0x0e0: 0000 0000 0000 0000 0000 0000 0000 0000
0x0f0: 78bf 1f00 8883 0000 660f 0000 0600 0000

Class = Bridge (PCI/PCI)
Vendor ID = 8086h, Intel Corporation
Device ID = 244eh, 82801 PCI Bridge
PCI index = 0h
Class Codes = 060400h
Revision ID = ah
Bus number = 0
Device number = 30
Function num = 0
Status Reg = 8080h
Command Reg = 7h
I/O space access enabled
Memory space access enabled
Bus Master enabled
Special Cycle operations ignored
Memory Write and Invalidate disabled
Palette Snooping disabled
Parity Error Response disabled
Data/Address stepping disabled
SERR# driver disabled
Fast back-to-back transactions to different agents disabled
Header type = 1h Single-function
BIST = 0h Build-in-self-test not supported
Latency Timer = 0h
Cache Line Size= 0h
Primary Bus Number = 0
Secondary Bus Number = 3
Subordinate Bus Number = 3
Secondary Latency Timer = 40h
I/O Base = e0h
I/O Limit = e0h
Secondary Status = 2280h
Memory Base = dfd0h
Memory Limit = dfd0h
Prefetchable Memory Base = fff0h
Prefetchable Memory Limit= 0h
Prefetchable Base Upper 32 Bits = 0h
Prefetchable Limit Upper 32 Bits = 0h
I/O Base Upper 16 Bits = 0h
I/O Limit Upper 16 Bits = 0h
Bridge Control = 0h
PCI Int Pin = NC
Interrupt line = 0
CPU Interrupt = 0h
Device Dependent Registers:
0x040: 0228 2076 0000 0000 0000 0000 0000 0000
0x050: 0214 0000 0000 0000 5011 3401 0000 0000
0x060: 0000 0000 0000 0000 0000 0000 0000 0000
0x070: 2000 0000 0000 0000 0000 0000 0000 0000
0x080: 0000 0000 0000 0000 0000 0000 0000 0000
...
0x0a0: 1000 0800 0000 0000 0000 0000 0000 0000
0x0b0: 0100 0200 0000 c000 0000 0000 0000 0000
0x0c0: 0000 0000 0000 0000 0000 0000 0000 0000
...
0x0f0: 0000 0000 0000 0000 660f 0000 0000 522e

Class = Bridge (PCI/ISA)
Vendor ID = 8086h, Intel Corporation
Device ID = 25a1h, 6300ESB LPC Interface Controller
PCI index = 0h
Class Codes = 060100h
Revision ID = 2h
Bus number = 0
Device number = 31
Function num = 0
Status Reg = 280h
Command Reg = fh
I/O space access enabled
Memory space access enabled
Bus Master enabled
Special Cycle operations monitor
Memory Write and Invalidate disabled
Palette Snooping disabled
Parity Error Response disabled
Data/Address stepping disabled
SERR# driver disabled
Fast back-to-back transactions to different agents disabled
Header type = 0h Multi-function
BIST = 0h Build-in-self-test not supported
Latency Timer = 0h
Cache Line Size= 0h
Max Lat = 0ns
Min Gnt = 0ns
PCI Int Pin = NC
Interrupt line = 0
CPU Interrupt = 0h
Device Dependent Registers:
0x040: 0101 0000 1000 0000 0000 0000 0000 0100
0x050: 0000 0000 0000 0000 0105 0000 1000 0000
0x060: 0b0b 0909 d000 0000 0a80 800b 0000 0000
0x070: 0000 0000 0000 0000 0000 0000 0000 0000
...
0x090: fffc 0000 0000 0000 0000 0000 0000 0000
0x0a0: 0002 0000 4400 0000 1200 0000 0000 0000
0x0b0: 0000 0000 0000 0000 0000 0000 0000 0000
...
0x0d0: 8001 0000 020f 0000 0400 0000 0000 0000
0x0e0: 1000 00c0 0000 0334 3322 1100 0000 6745
0x0f0: 0000 c000 0000 0000 660f 0200 0000 0100

Class = Mass Storage (IDE)
Vendor ID = 8086h, Intel Corporation
Device ID = 25a2h, 6300ESB PATA Storage Controller
PCI index = 0h
Class Codes = 01018fh
Revision ID = 2h
Bus number = 0
Device number = 31
Function num = 1
Status Reg = 288h
Command Reg = 7h
I/O space access enabled
Memory space access enabled
Bus Master enabled
Special Cycle operations ignored
Memory Write and Invalidate disabled
Palette Snooping disabled
Parity Error Response disabled
Data/Address stepping disabled
SERR# driver disabled
Fast back-to-back transactions to different agents disabled
Header type = 0h Single-function
BIST = 0h Build-in-self-test not supported
Latency Timer = 0h
Cache Line Size= 0h
PCI IO Address = dc40h length 8 enabled
PCI IO Address = dc48h length 4 enabled
PCI IO Address = dc50h length 8 enabled
PCI IO Address = dc58h length 4 enabled
PCI IO Address = dc80h length 16 enabled
PCI Mem Address = dfc7fc00h 32bit length 1024 enabled
Subsystem Vendor ID = 8086h
Subsystem ID = 25a9h
Max Lat = 0ns
Min Gnt = 0ns
PCI Int Pin = INT A
Interrupt line = 9
CPU Interrupt = 9h
Device Dependent Registers:
0x040: 0080 0080 0000 0000 0000 0000 0000 0000
0x050: 0000 0000 0000 0000 0000 0000 0000 0000
0x060: 0800 0000 0000 0000 0800 0000 0000 0000
0x070: 0000 0000 0000 0000 0000 0000 0000 0000
...
0x0f0: 0000 0000 0000 0000 660f 0000 0000 0000

Class = Mass Storage (IDE)
Vendor ID = 8086h, Intel Corporation
Device ID = 25a3h, 6300ESB SATA Storage Controller
PCI index = 0h
Class Codes = 01018fh
Revision ID = 2h
Bus number = 0
Device number = 31
Function num = 2
Status Reg = 2a0h
Command Reg = 5h
I/O space access enabled
Memory space access disabled
Bus Master enabled
Special Cycle operations ignored
Memory Write and Invalidate disabled
Palette Snooping disabled
Parity Error Response disabled
Data/Address stepping disabled
SERR# driver disabled
Fast back-to-back transactions to different agents disabled
Header type = 0h Single-function
BIST = 0h Build-in-self-test not supported
Latency Timer = 0h
Cache Line Size= 0h
PCI IO Address = dc60h length 8 enabled
PCI IO Address = dc68h length 4 enabled
PCI IO Address = dc70h length 8 enabled
PCI IO Address = dc78h length 4 enabled
PCI IO Address = dc90h length 16 enabled
Subsystem Vendor ID = 8086h
Subsystem ID = 25a1h
Max Lat = 0ns
Min Gnt = 0ns
PCI Int Pin = INT A
Interrupt line = 9
CPU Interrupt = 9h
Device Dependent Registers:
0x040: 0080 0080 0000 0000 0000 0000 0000 0000
0x050: 0000 0000 0000 0000 0000 0000 0000 0000
...
0x070: 0100 0200 0000 0000 0000 0000 0000 0000
0x080: 0570 0000 0000 0000 0000 0000 0000 0000
0x090: 0000 0300 0000 0000 0000 0000 0000 0000
0x0a0: 4000 0000 4300 2200 0000 0000 0000 0000
0x0b0: 0000 0000 0000 0000 0000 0000 0000 0000
...
0x0f0: 0000 0000 0000 0000 660f 0000 0000 0000

Class = Serial Bus (SMBus)
Vendor ID = 8086h, Intel Corporation
Device ID = 25a4h, 6300ESB SMBus Controller
PCI index = 0h
Class Codes = 0c0500h
Revision ID = 2h
Bus number = 0
Device number = 31
Function num = 3
Status Reg = 280h
Command Reg = 1h
I/O space access enabled
Memory space access disabled
Bus Master disabled
Special Cycle operations ignored
Memory Write and Invalidate disabled
Palette Snooping disabled
Parity Error Response disabled
Data/Address stepping disabled
SERR# driver disabled
Fast back-to-back transactions to different agents disabled
Header type = 0h Single-function
BIST = 0h Build-in-self-test not supported
Latency Timer = 0h
Cache Line Size= 0h
PCI IO Address = dce0h length 32 enabled
Subsystem Vendor ID = 8086h
Subsystem ID = 25a9h
Max Lat = 0ns
Min Gnt = 0ns
PCI Int Pin = INT B
Interrupt line = 11
CPU Interrupt = bh
Device Dependent Registers:
0x040: 0100 0000 0000 0000 0000 0000 0000 0000
0x050: 0000 0000 0000 0000 0000 0000 0000 0000
...
0x0f0: 0000 0000 0000 0000 660f 0000 0000 0000

Class = Multimedia (Audio)
Vendor ID = 8086h, Intel Corporation
Device ID = 25a6h, 6300ESB AC'97 Audio Controller
PCI index = 0h
Class Codes = 040100h
Revision ID = 2h
Bus number = 0
Device number = 31
Function num = 5
Status Reg = 290h
Command Reg = 6h
I/O space access disabled
Memory space access enabled
Bus Master enabled
Special Cycle operations ignored
Memory Write and Invalidate disabled
Palette Snooping disabled
Parity Error Response disabled
Data/Address stepping disabled
SERR# driver disabled
Fast back-to-back transactions to different agents disabled
Header type = 0h Single-function
BIST = 0h Build-in-self-test not supported
Latency Timer = 0h
Cache Line Size= 0h
PCI Mem Address = dfc7f600h 32bit length 512 enabled
PCI Mem Address = dfc7f500h 32bit length 256 enabled
Subsystem Vendor ID = 8384h
Subsystem ID = 7652h
Max Lat = 0ns
Min Gnt = 0ns
PCI Int Pin = INT B
Interrupt line = 11
CPU Interrupt = bh
Capabilities Pointer = 50h
Capability ID = 1h - Power Management
Capabilities = c9c2h - 0h
Device Dependent Registers:
0x040: 0900 0000 0000 0000 0000 0000 0000 0000
0x050: 0100 c2c9 0000 0000 0000 0000 0000 0000
0x060: 0000 0000 0000 0000 0000 0000 0000 0000
...
0x0f0: 0000 0000 0000 0000 660f 0000 0000 0000

Class = Network (Ethernet)
Vendor ID = 8086h, Intel Corporation
Device ID = 1079h, 82546GB Gigabit Ethernet Controller
PCI index = 0h
Class Codes = 020000h
Revision ID = 3h
Bus number = 2
Device number = 4
Function num = 0
Status Reg = 230h
Command Reg = 0h
I/O space access disabled
Memory space access disabled
Bus Master disabled
Special Cycle operations ignored
Memory Write and Invalidate disabled
Palette Snooping disabled
Parity Error Response disabled
Data/Address stepping disabled
SERR# driver disabled
Fast back-to-back transactions to different agents disabled
Header type = 0h Multi-function
BIST = 0h Build-in-self-test not supported
Latency Timer = 40h
Cache Line Size= 10h un-cacheable
PCI Mem Address = 0h 64bit length 131072 disabled
PCI Mem Address = 0h 64bit length 262144 disabled
PCI IO Address = 0h length 64 disabled
Subsystem Vendor ID = 8086h
Subsystem ID = 1h
PCI Expansion ROM = 0h length 262144 disabled
Max Lat = 0ns
Min Gnt = 255ns
PCI Int Pin = INT A
Interrupt line = 9
CPU Interrupt = 9h
Capabilities Pointer = dch
Capability ID = 1h - Power Management
Capabilities = 4822h - 50002000h
Capability ID = 7h - PCI-X
Capabilities = 2h - 4430220h
Capability ID = 5h - Message Signaled Interrupts
Capabilities = 80h - 0h
Device Dependent Registers:
0x040: 0000 0000 0000 0000 0000 0000 0000 0000
...
0x0d0: 0000 0000 0000 0000 0000 0000 01e4 2248
0x0e0: 0020 0050 07f0 0200 2002 4304 0000 0000
0x0f0: 0500 8000 0000 0000 0000 0000 0000 0000

Class = Network (Ethernet)
Vendor ID = 8086h, Intel Corporation
Device ID = 1079h, 82546GB Gigabit Ethernet Controller
PCI index = 1h
Class Codes = 020000h
Revision ID = 3h
Bus number = 2
Device number = 4
Function num = 1
Status Reg = 230h
Command Reg = 0h
I/O space access disabled
Memory space access disabled
Bus Master disabled
Special Cycle operations ignored
Memory Write and Invalidate disabled
Palette Snooping disabled
Parity Error Response disabled
Data/Address stepping disabled
SERR# driver disabled
Fast back-to-back transactions to different agents disabled
Header type = 0h Multi-function
BIST = 0h Build-in-self-test not supported
Latency Timer = 40h
Cache Line Size= 10h un-cacheable
PCI Mem Address = 0h 64bit length 131072 disabled
PCI Mem Address = 0h 64bit length 262144 disabled
PCI IO Address = 0h length 64 disabled
Subsystem Vendor ID = 8086h
Subsystem ID = 1h
PCI Expansion ROM = 0h length 262144 disabled
Max Lat = 0ns
Min Gnt = 255ns
PCI Int Pin = INT B
Interrupt line = 9
CPU Interrupt = 9h
Capabilities Pointer = dch
Capability ID = 1h - Power Management
Capabilities = 4822h - 50002000h
Capability ID = 7h - PCI-X
Capabilities = 2h - 4430221h
Capability ID = 5h - Message Signaled Interrupts
Capabilities = 80h - 0h
Device Dependent Registers:
0x040: 0000 0000 0000 0000 0000 0000 0000 0000
...
0x0d0: 0000 0000 0000 0000 0000 0000 01e4 2248
0x0e0: 0020 0050 07f0 0200 2102 4304 0000 0000
0x0f0: 0500 8000 0000 0000 0000 0000 0000 0000

Class = Bridge (Other)
Vendor ID = 10e3h, Tundra Semiconductor Corp.
Device ID = 0h, CA91C042 [Universe]
PCI index = 0h
Class Codes = 068000h
Revision ID = 2h
Bus number = 3
Device number = 5
Function num = 0
Status Reg = 200h
Command Reg = 6h
I/O space access disabled
Memory space access enabled
Bus Master enabled
Special Cycle operations ignored
Memory Write and Invalidate disabled
Palette Snooping disabled
Parity Error Response disabled
Data/Address stepping disabled
SERR# driver disabled
Fast back-to-back transactions to different agents disabled
Header type = 0h Single-function
BIST = 0h Build-in-self-test not supported
Latency Timer = 40h
Cache Line Size= 0h
Max Lat = 0ns
Min Gnt = 3ns
PCI Int Pin = INT A
Interrupt line = 10
CPU Interrupt = ah
Device Dependent Registers:
0x040: 0000 0000 0000 0000 0000 0000 0000 0000
...
0x0f0: 0000 0000 0000 0000 0000 0000 0000 0000
gopyan
Active Member
 
Posts: 64
Joined: Tue Mar 02, 2010 1:39 pm

RE: devb-eide cause halt system

Postby maschoen » Mon Apr 11, 2011 8:04 pm

I took a look and found one thing suspicious looking. You have to hard drive controllers.
One says PATA and the other says IDE SATA.

I'm wondering if the EIDE driver is only looking at the SATA controller and giving up.
Can you get into the BIOS? Maybe there is a "compatibility" mode you need to turn on.

BTW, you are using 6.5, right ;-).
maschoen
QNX Master
 
Posts: 2644
Joined: Wed Jun 25, 2003 5:18 pm

RE: devb-eide cause halt system

Postby gopyan » Tue Apr 12, 2011 5:01 am

No , I using 6.4.1
gopyan
Active Member
 
Posts: 64
Joined: Tue Mar 02, 2010 1:39 pm

RE: devb-eide cause halt system

Postby maschoen » Tue Apr 12, 2011 5:59 am

Close enough.
maschoen
QNX Master
 
Posts: 2644
Joined: Wed Jun 25, 2003 5:18 pm

RE: devb-eide cause halt system

Postby gopyan » Tue Apr 12, 2011 3:50 pm

Hello Maschoen. Thank you for attention to my problem.

My bios haven't compatibility settings. How else i can to find out where is the problem???
gopyan
Active Member
 
Posts: 64
Joined: Tue Mar 02, 2010 1:39 pm

RE: devb-eide cause halt system

Postby gopyan » Tue Apr 12, 2011 3:56 pm

Hello Maschoen. Thank you for attention to my problem.

My bios haven't compatibility settings. How else i can to find out where is the problem???
gopyan
Active Member
 
Posts: 64
Joined: Tue Mar 02, 2010 1:39 pm

RE: devb-eide cause halt system

Postby maschoen » Tue Apr 12, 2011 3:57 pm

Since you have a USB port, I'd try hooking up a USB CD/DVD and boot off of the QNX installation disk. If that fails, then I'd contact QNX.
maschoen
QNX Master
 
Posts: 2644
Joined: Wed Jun 25, 2003 5:18 pm

RE: devb-eide cause halt system

Postby gopyan » Tue Apr 12, 2011 4:18 pm

I try to boot from cd, but system halt also.
gopyan
Active Member
 
Posts: 64
Joined: Tue Mar 02, 2010 1:39 pm

Re: RE: devb-eide cause halt system

Postby maschoen » Tue Apr 12, 2011 5:31 pm

gopyan wrote:I try to boot from cd, but system halt also.


Then you need to contact QNX.
maschoen
QNX Master
 
Posts: 2644
Joined: Wed Jun 25, 2003 5:18 pm

Postby Tim » Wed Apr 13, 2011 1:18 pm

Gopyan,

Is this a regular PC or some kind of embedded board with hardware on it?

Recently we tried installing 6.5 on an embedded board that has a builtin H264 decoder device attached on the PCI bus. QNX hung at devb-eide. The only way around it was to specify the exact PCI parameters where the hard drive controller is and not let devb-eide interrogate the rest of the PCI bus.

Ironically, 6.3.2 would boot with no problems. So something in newer versions of devb-eide causes the problem.

Tim
Tim
Senior Member
 
Posts: 1390
Joined: Wed Mar 10, 2004 12:28 am

Postby gopyan » Thu Apr 14, 2011 3:47 pm

Tim wrote:Gopyan,

Is this a regular PC or some kind of embedded board with hardware on it?


Tim


It is embedded board with hardware on it. You right about 6.3.0. I have install qnx 6.3.0. on this board. But I need 6.4.1
gopyan
Active Member
 
Posts: 64
Joined: Tue Mar 02, 2010 1:39 pm

Postby Tim » Thu Apr 14, 2011 5:02 pm

You'll probably need to do a custom boot image (what our QNX rep said about installing 6.5 on the PC104 board).

By that I mean you'll need to install 6.5 on another machine. Then create a custom .boot file where you specify the PCI parameter where the HD is located to devb-eide. That way devb-eide doesn't try and interrogate the other hardware (which is obviously what's going wrong).

Tim
Tim
Senior Member
 
Posts: 1390
Joined: Wed Mar 10, 2004 12:28 am

Postby gopyan » Sat Apr 16, 2011 10:54 am

My board - xvme690. I try to install qnx 6.5.0 , but unsuccessfully
gopyan
Active Member
 
Posts: 64
Joined: Tue Mar 02, 2010 1:39 pm

Postby gopyan » Sat Apr 16, 2011 3:36 pm

If i invoke

devb-eide eide vid=0x8086,did=0x25a2

or

devb-eide eide vid=0x8086,did=0x25a3

system don't halt. But.....

when invoke SLOGINFO i have

....
....
xpt_configure:No eide interfaces found
gopyan
Active Member
 
Posts: 64
Joined: Tue Mar 02, 2010 1:39 pm

Next

Return to QNX6 - OS

Who is online

Users browsing this forum: No registered users and 1 guest