sis 900 network & sis 630 video and ...

bridged with qdn.public.qnxrtp.installation
Post Reply
Andrew AYSC

sis 900 network & sis 630 video and ...

Post by Andrew AYSC » Wed Jun 20, 2001 10:58 am

Hi All !

Who can help with configuring this to devices ?

pci -v result:


PCI version = 2.10

Class = Bridge (Host/PCI)
Vendor ID = 1039h, Silicon Integrated System
Device ID = 630h, SiS630 Host-to-PCI Bridge
PCI index = 0h
Class Codes = 060000h
Revision ID = 21h
Bus number = 0
Device number = 0
Function num = 0
Status Reg = 2210h
Command Reg = 7h
Header type = 0h Multi-function
BIST = 0h Build-in-self-test not supported
Latency Timer = 20h
Cache Line Size= 0h
Max Lat = 0ns
Min Gnt = 0ns
PCI Int Pin = NC
Interrupt line = 0
Capabilities Pointer = c0h
Capability ID = 2h
Capabilities = 20h - 1f000207h

Class = Mass Storage (IDE)
Vendor ID = 1039h, Silicon Integrated System
Device ID = 5513h, SiS5513 PCI IDE Controller
PCI index = 0h
Class Codes = 010180h
Revision ID = d0h
Bus number = 0
Device number = 0
Function num = 1
Status Reg = 0h
Command Reg = 7h
Header type = 0h Multi-function
BIST = 0h Build-in-self-test not supported
Latency Timer = 80h
Cache Line Size= 0h
IO Address = 8800h length 16 enabled
Subsystem Vendor ID = 1039h
Subsystem ID = 5513h
Max Lat = 0ns
Min Gnt = 0ns
PCI Int Pin = INT A
Interrupt line = no connection

Class = Bridge (PCI/ISA)
Vendor ID = 1039h, Silicon Integrated System
Device ID = 8h, SiS 85C503 PCI System I/O (PSIO)
PCI index = 0h
Class Codes = 060100h
Revision ID = 0h
Bus number = 0
Device number = 1
Function num = 0
Status Reg = 200h
Command Reg = dh
Header type = 0h Multi-function
BIST = 0h Build-in-self-test not supported
Latency Timer = 0h
Cache Line Size= 0h
Max Lat = 0ns
Min Gnt = 0ns
PCI Int Pin = NC
Interrupt line = 0

Class = Network (Ethernet)
Vendor ID = 1039h, Silicon Integrated System
Device ID = 900h, SiS630 Fast Ethernet/Home Networking Ctrlr
PCI index = 0h
Class Codes = 020000h
Revision ID = 83h
Bus number = 0
Device number = 1
Function num = 1
Status Reg = 290h
Command Reg = 7h
Header type = 0h Single-function
BIST = 0h Build-in-self-test not supported
Latency Timer = 20h
Cache Line Size= 0h
IO Address = 8000h length 256 enabled
Mem Address = 90100000h 32bit length 4096 enabled
Subsystem Vendor ID = 1025h
Subsystem ID = 17h
Expansion ROM = 90120000h length 131072 disabled
Max Lat = 11ns
Min Gnt = 52ns
PCI Int Pin = INT C
Interrupt line = 10
Capabilities Pointer = 40h
Capability ID = 1h
Capabilities = fec2h - 0h

Class = Serial Bus (Universal Serial Bus)
Vendor ID = 1039h, Silicon Integrated System
Device ID = 7001h, SiS5571 USB Host Controller
PCI index = 0h
Class Codes = 0c0310h
Revision ID = 7h
Bus number = 0
Device number = 1
Function num = 2
Status Reg = 280h
Command Reg = 7h
Header type = 0h Single-function
BIST = 0h Build-in-self-test not supported
Latency Timer = 20h
Cache Line Size= 8h un-cacheable
Mem Address = 90500000h 32bit length 4096 enabled
Subsystem Vendor ID = 1039h
Subsystem ID = 7001h
Max Lat = 80ns
Min Gnt = 0ns
PCI Int Pin = INT D
Interrupt line = 9

Class = Serial Bus (Universal Serial Bus)
Vendor ID = 1039h, Silicon Integrated System
Device ID = 7001h, SiS5571 USB Host Controller
PCI index = 1h
Class Codes = 0c0310h
Revision ID = 7h
Bus number = 0
Device number = 1
Function num = 3
Status Reg = 280h
Command Reg = 7h
Header type = 0h Single-function
BIST = 0h Build-in-self-test not supported
Latency Timer = 20h
Cache Line Size= 8h un-cacheable
Mem Address = 90700000h 32bit length 4096 enabled
Subsystem Vendor ID = 1039h
Subsystem ID = 7000h
Max Lat = 80ns
Min Gnt = 0ns
PCI Int Pin = INT D
Interrupt line = 9

Class = Multimedia (Audio)
Vendor ID = 1039h, Silicon Integrated System
Device ID = 7018h, SiS630 Audio Accelerator
PCI index = 0h
Class Codes = 040100h
Revision ID = 2h
Bus number = 0
Device number = 1
Function num = 4
Status Reg = 290h
Command Reg = 7h
Header type = 0h Single-function
BIST = 0h Build-in-self-test not supported
Latency Timer = 20h
Cache Line Size= 0h
IO Address = 8400h length 256 enabled
Mem Address = 90300000h 32bit length 4096 enabled
Subsystem Vendor ID = 1025h
Subsystem ID = 18h
Max Lat = 24ns
Min Gnt = 2ns
PCI Int Pin = INT B
Interrupt line = 11
Capabilities Pointer = dch
Capability ID = 1h
Capabilities = e662h - 0h

Class = Bridge (PCI/PCI)
Vendor ID = 1039h, Silicon Integrated System
Device ID = 1h, SiS 530 Virtual PCI-to-PCI bridge (AGP)
PCI index = 0h
Class Codes = 060400h
Revision ID = 0h
Bus number = 0
Device number = 2
Function num = 0
Status Reg = 0h
Command Reg = 7h
Header type = 1h Single-function
BIST = 0h Build-in-self-test not supported
Latency Timer = 0h
Cache Line Size= 0h
Primary Bus Number = 0h
Secondary Bus Number = 1h
Subordinate Bus Number = 1h
Secondary Latency Timer = 0h
I/O Base = 70h
I/O Limit = 70h
Secondary Status = 2000h
Memory Base = 8010h
Memory Limit = 8010h
Prefetchable Memory Base = 8020h
Prefetchable Memory Limit= 9000h
Prefetchable Base Upper 32 Bits = 0h
Prefetchable Limit Upper 32 Bits = 0h
I/O Base Upper 16 Bits = ffffh
I/O Limit Upper 16 Bits = ffffh
Bridge Control = 8ns
PCI Int Pin = NC
Interrupt line = 0

Class = Display (VGA)
Vendor ID = 1039h, Silicon Integrated System
Device ID = 6300h, SiS630 AGP
PCI index = 0h
Class Codes = 030000h
Revision ID = 21h
Bus number = 1
Device number = 0
Function num = 0
Status Reg = 2b0h
Command Reg = 3h
Header type = 0h Single-function
BIST = 80h Selftest OK
Latency Timer = 0h
Cache Line Size= 0h
Mem Address = 88000000h prefetchable 32bit length 134217728 enabled
Mem Address = 80100000h 32bit length 131072 enabled
IO Address = 7000h length 128 enabled
Subsystem Vendor ID = 1025h
Subsystem ID = 16h
Max Lat = 0ns
Min Gnt = 0ns
PCI Int Pin = NC
Interrupt line = 0
Capabilities Pointer = 40h
Capability ID = 1h
Capabilities = 601h - 0h
Capability ID = 2h
Capabilities = 20h - f000207h

Thanx,
Andrew

Hardware Support Account

Re: sis 900 network & sis 630 video and ...

Post by Hardware Support Account » Thu Jun 21, 2001 3:30 pm

Hi Andrew,

There is work being done to support the SiS 630
graphics, but it will not be ready for 6.1

There is support for the network chip is in 6.1.


Regards,

Joe

Andrew AYSC <Andrew.Sas@arcadia.it> wrote:
Hi All !

Who can help with configuring this to devices ?

pci -v result:
PCI version = 2.10

Class = Bridge (Host/PCI)
Vendor ID = 1039h, Silicon Integrated System
Device ID = 630h, SiS630 Host-to-PCI Bridge
PCI index = 0h
Class Codes = 060000h
Revision ID = 21h
Bus number = 0
Device number = 0
Function num = 0
Status Reg = 2210h
Command Reg = 7h
Header type = 0h Multi-function
BIST = 0h Build-in-self-test not supported
Latency Timer = 20h
Cache Line Size= 0h
Max Lat = 0ns
Min Gnt = 0ns
PCI Int Pin = NC
Interrupt line = 0
Capabilities Pointer = c0h
Capability ID = 2h
Capabilities = 20h - 1f000207h

Class = Mass Storage (IDE)
Vendor ID = 1039h, Silicon Integrated System
Device ID = 5513h, SiS5513 PCI IDE Controller
PCI index = 0h
Class Codes = 010180h
Revision ID = d0h
Bus number = 0
Device number = 0
Function num = 1
Status Reg = 0h
Command Reg = 7h
Header type = 0h Multi-function
BIST = 0h Build-in-self-test not supported
Latency Timer = 80h
Cache Line Size= 0h
IO Address = 8800h length 16 enabled
Subsystem Vendor ID = 1039h
Subsystem ID = 5513h
Max Lat = 0ns
Min Gnt = 0ns
PCI Int Pin = INT A
Interrupt line = no connection

Class = Bridge (PCI/ISA)
Vendor ID = 1039h, Silicon Integrated System
Device ID = 8h, SiS 85C503 PCI System I/O (PSIO)
PCI index = 0h
Class Codes = 060100h
Revision ID = 0h
Bus number = 0
Device number = 1
Function num = 0
Status Reg = 200h
Command Reg = dh
Header type = 0h Multi-function
BIST = 0h Build-in-self-test not supported
Latency Timer = 0h
Cache Line Size= 0h
Max Lat = 0ns
Min Gnt = 0ns
PCI Int Pin = NC
Interrupt line = 0

Class = Network (Ethernet)
Vendor ID = 1039h, Silicon Integrated System
Device ID = 900h, SiS630 Fast Ethernet/Home Networking Ctrlr
PCI index = 0h
Class Codes = 020000h
Revision ID = 83h
Bus number = 0
Device number = 1
Function num = 1
Status Reg = 290h
Command Reg = 7h
Header type = 0h Single-function
BIST = 0h Build-in-self-test not supported
Latency Timer = 20h
Cache Line Size= 0h
IO Address = 8000h length 256 enabled
Mem Address = 90100000h 32bit length 4096 enabled
Subsystem Vendor ID = 1025h
Subsystem ID = 17h
Expansion ROM = 90120000h length 131072 disabled
Max Lat = 11ns
Min Gnt = 52ns
PCI Int Pin = INT C
Interrupt line = 10
Capabilities Pointer = 40h
Capability ID = 1h
Capabilities = fec2h - 0h

Class = Serial Bus (Universal Serial Bus)
Vendor ID = 1039h, Silicon Integrated System
Device ID = 7001h, SiS5571 USB Host Controller
PCI index = 0h
Class Codes = 0c0310h
Revision ID = 7h
Bus number = 0
Device number = 1
Function num = 2
Status Reg = 280h
Command Reg = 7h
Header type = 0h Single-function
BIST = 0h Build-in-self-test not supported
Latency Timer = 20h
Cache Line Size= 8h un-cacheable
Mem Address = 90500000h 32bit length 4096 enabled
Subsystem Vendor ID = 1039h
Subsystem ID = 7001h
Max Lat = 80ns
Min Gnt = 0ns
PCI Int Pin = INT D
Interrupt line = 9

Class = Serial Bus (Universal Serial Bus)
Vendor ID = 1039h, Silicon Integrated System
Device ID = 7001h, SiS5571 USB Host Controller
PCI index = 1h
Class Codes = 0c0310h
Revision ID = 7h
Bus number = 0
Device number = 1
Function num = 3
Status Reg = 280h
Command Reg = 7h
Header type = 0h Single-function
BIST = 0h Build-in-self-test not supported
Latency Timer = 20h
Cache Line Size= 8h un-cacheable
Mem Address = 90700000h 32bit length 4096 enabled
Subsystem Vendor ID = 1039h
Subsystem ID = 7000h
Max Lat = 80ns
Min Gnt = 0ns
PCI Int Pin = INT D
Interrupt line = 9

Class = Multimedia (Audio)
Vendor ID = 1039h, Silicon Integrated System
Device ID = 7018h, SiS630 Audio Accelerator
PCI index = 0h
Class Codes = 040100h
Revision ID = 2h
Bus number = 0
Device number = 1
Function num = 4
Status Reg = 290h
Command Reg = 7h
Header type = 0h Single-function
BIST = 0h Build-in-self-test not supported
Latency Timer = 20h
Cache Line Size= 0h
IO Address = 8400h length 256 enabled
Mem Address = 90300000h 32bit length 4096 enabled
Subsystem Vendor ID = 1025h
Subsystem ID = 18h
Max Lat = 24ns
Min Gnt = 2ns
PCI Int Pin = INT B
Interrupt line = 11
Capabilities Pointer = dch
Capability ID = 1h
Capabilities = e662h - 0h

Class = Bridge (PCI/PCI)
Vendor ID = 1039h, Silicon Integrated System
Device ID = 1h, SiS 530 Virtual PCI-to-PCI bridge (AGP)
PCI index = 0h
Class Codes = 060400h
Revision ID = 0h
Bus number = 0
Device number = 2
Function num = 0
Status Reg = 0h
Command Reg = 7h
Header type = 1h Single-function
BIST = 0h Build-in-self-test not supported
Latency Timer = 0h
Cache Line Size= 0h
Primary Bus Number = 0h
Secondary Bus Number = 1h
Subordinate Bus Number = 1h
Secondary Latency Timer = 0h
I/O Base = 70h
I/O Limit = 70h
Secondary Status = 2000h
Memory Base = 8010h
Memory Limit = 8010h
Prefetchable Memory Base = 8020h
Prefetchable Memory Limit= 9000h
Prefetchable Base Upper 32 Bits = 0h
Prefetchable Limit Upper 32 Bits = 0h
I/O Base Upper 16 Bits = ffffh
I/O Limit Upper 16 Bits = ffffh
Bridge Control = 8ns
PCI Int Pin = NC
Interrupt line = 0

Class = Display (VGA)
Vendor ID = 1039h, Silicon Integrated System
Device ID = 6300h, SiS630 AGP
PCI index = 0h
Class Codes = 030000h
Revision ID = 21h
Bus number = 1
Device number = 0
Function num = 0
Status Reg = 2b0h
Command Reg = 3h
Header type = 0h Single-function
BIST = 80h Selftest OK
Latency Timer = 0h
Cache Line Size= 0h
Mem Address = 88000000h prefetchable 32bit length 134217728 enabled
Mem Address = 80100000h 32bit length 131072 enabled
IO Address = 7000h length 128 enabled
Subsystem Vendor ID = 1025h
Subsystem ID = 16h
Max Lat = 0ns
Min Gnt = 0ns
PCI Int Pin = NC
Interrupt line = 0
Capabilities Pointer = 40h
Capability ID = 1h
Capabilities = 601h - 0h
Capability ID = 2h
Capabilities = 20h - f000207h

Thanx,
Andrew

Andrew AYSC

Re: sis 900 network & sis 630 video and ...

Post by Andrew AYSC » Sat Jun 23, 2001 8:11 am

Hi !

Is it known when 6.1 will be available for download ?

Regards,
Andrew.

"Hardware Support Account" <hw@qnx.com> wrote in message news:9gt3u4$ru0$1@nntp.qnx.com...
Hi Andrew,

There is work being done to support the SiS 630
graphics, but it will not be ready for 6.1

There is support for the network chip is in 6.1.


Regards,

Joe

Andrew AYSC <Andrew.Sas@arcadia.it> wrote:
Hi All !

Who can help with configuring this to devices ?

pci -v result:


PCI version = 2.10

Class = Bridge (Host/PCI)
Vendor ID = 1039h, Silicon Integrated System
Device ID = 630h, SiS630 Host-to-PCI Bridge
PCI index = 0h
Class Codes = 060000h
Revision ID = 21h
Bus number = 0
Device number = 0
Function num = 0
Status Reg = 2210h
Command Reg = 7h
Header type = 0h Multi-function
BIST = 0h Build-in-self-test not supported
Latency Timer = 20h
Cache Line Size= 0h
Max Lat = 0ns
Min Gnt = 0ns
PCI Int Pin = NC
Interrupt line = 0
Capabilities Pointer = c0h
Capability ID = 2h
Capabilities = 20h - 1f000207h

Class = Mass Storage (IDE)
Vendor ID = 1039h, Silicon Integrated System
Device ID = 5513h, SiS5513 PCI IDE Controller
PCI index = 0h
Class Codes = 010180h
Revision ID = d0h
Bus number = 0
Device number = 0
Function num = 1
Status Reg = 0h
Command Reg = 7h
Header type = 0h Multi-function
BIST = 0h Build-in-self-test not supported
Latency Timer = 80h
Cache Line Size= 0h
IO Address = 8800h length 16 enabled
Subsystem Vendor ID = 1039h
Subsystem ID = 5513h
Max Lat = 0ns
Min Gnt = 0ns
PCI Int Pin = INT A
Interrupt line = no connection

Class = Bridge (PCI/ISA)
Vendor ID = 1039h, Silicon Integrated System
Device ID = 8h, SiS 85C503 PCI System I/O (PSIO)
PCI index = 0h
Class Codes = 060100h
Revision ID = 0h
Bus number = 0
Device number = 1
Function num = 0
Status Reg = 200h
Command Reg = dh
Header type = 0h Multi-function
BIST = 0h Build-in-self-test not supported
Latency Timer = 0h
Cache Line Size= 0h
Max Lat = 0ns
Min Gnt = 0ns
PCI Int Pin = NC
Interrupt line = 0

Class = Network (Ethernet)
Vendor ID = 1039h, Silicon Integrated System
Device ID = 900h, SiS630 Fast Ethernet/Home Networking Ctrlr
PCI index = 0h
Class Codes = 020000h
Revision ID = 83h
Bus number = 0
Device number = 1
Function num = 1
Status Reg = 290h
Command Reg = 7h
Header type = 0h Single-function
BIST = 0h Build-in-self-test not supported
Latency Timer = 20h
Cache Line Size= 0h
IO Address = 8000h length 256 enabled
Mem Address = 90100000h 32bit length 4096 enabled
Subsystem Vendor ID = 1025h
Subsystem ID = 17h
Expansion ROM = 90120000h length 131072 disabled
Max Lat = 11ns
Min Gnt = 52ns
PCI Int Pin = INT C
Interrupt line = 10
Capabilities Pointer = 40h
Capability ID = 1h
Capabilities = fec2h - 0h

Class = Serial Bus (Universal Serial Bus)
Vendor ID = 1039h, Silicon Integrated System
Device ID = 7001h, SiS5571 USB Host Controller
PCI index = 0h
Class Codes = 0c0310h
Revision ID = 7h
Bus number = 0
Device number = 1
Function num = 2
Status Reg = 280h
Command Reg = 7h
Header type = 0h Single-function
BIST = 0h Build-in-self-test not supported
Latency Timer = 20h
Cache Line Size= 8h un-cacheable
Mem Address = 90500000h 32bit length 4096 enabled
Subsystem Vendor ID = 1039h
Subsystem ID = 7001h
Max Lat = 80ns
Min Gnt = 0ns
PCI Int Pin = INT D
Interrupt line = 9

Class = Serial Bus (Universal Serial Bus)
Vendor ID = 1039h, Silicon Integrated System
Device ID = 7001h, SiS5571 USB Host Controller
PCI index = 1h
Class Codes = 0c0310h
Revision ID = 7h
Bus number = 0
Device number = 1
Function num = 3
Status Reg = 280h
Command Reg = 7h
Header type = 0h Single-function
BIST = 0h Build-in-self-test not supported
Latency Timer = 20h
Cache Line Size= 8h un-cacheable
Mem Address = 90700000h 32bit length 4096 enabled
Subsystem Vendor ID = 1039h
Subsystem ID = 7000h
Max Lat = 80ns
Min Gnt = 0ns
PCI Int Pin = INT D
Interrupt line = 9

Class = Multimedia (Audio)
Vendor ID = 1039h, Silicon Integrated System
Device ID = 7018h, SiS630 Audio Accelerator
PCI index = 0h
Class Codes = 040100h
Revision ID = 2h
Bus number = 0
Device number = 1
Function num = 4
Status Reg = 290h
Command Reg = 7h
Header type = 0h Single-function
BIST = 0h Build-in-self-test not supported
Latency Timer = 20h
Cache Line Size= 0h
IO Address = 8400h length 256 enabled
Mem Address = 90300000h 32bit length 4096 enabled
Subsystem Vendor ID = 1025h
Subsystem ID = 18h
Max Lat = 24ns
Min Gnt = 2ns
PCI Int Pin = INT B
Interrupt line = 11
Capabilities Pointer = dch
Capability ID = 1h
Capabilities = e662h - 0h

Class = Bridge (PCI/PCI)
Vendor ID = 1039h, Silicon Integrated System
Device ID = 1h, SiS 530 Virtual PCI-to-PCI bridge (AGP)
PCI index = 0h
Class Codes = 060400h
Revision ID = 0h
Bus number = 0
Device number = 2
Function num = 0
Status Reg = 0h
Command Reg = 7h
Header type = 1h Single-function
BIST = 0h Build-in-self-test not supported
Latency Timer = 0h
Cache Line Size= 0h
Primary Bus Number = 0h
Secondary Bus Number = 1h
Subordinate Bus Number = 1h
Secondary Latency Timer = 0h
I/O Base = 70h
I/O Limit = 70h
Secondary Status = 2000h
Memory Base = 8010h
Memory Limit = 8010h
Prefetchable Memory Base = 8020h
Prefetchable Memory Limit= 9000h
Prefetchable Base Upper 32 Bits = 0h
Prefetchable Limit Upper 32 Bits = 0h
I/O Base Upper 16 Bits = ffffh
I/O Limit Upper 16 Bits = ffffh
Bridge Control = 8ns
PCI Int Pin = NC
Interrupt line = 0

Class = Display (VGA)
Vendor ID = 1039h, Silicon Integrated System
Device ID = 6300h, SiS630 AGP
PCI index = 0h
Class Codes = 030000h
Revision ID = 21h
Bus number = 1
Device number = 0
Function num = 0
Status Reg = 2b0h
Command Reg = 3h
Header type = 0h Single-function
BIST = 80h Selftest OK
Latency Timer = 0h
Cache Line Size= 0h
Mem Address = 88000000h prefetchable 32bit length 134217728 enabled
Mem Address = 80100000h 32bit length 131072 enabled
IO Address = 7000h length 128 enabled
Subsystem Vendor ID = 1025h
Subsystem ID = 16h
Max Lat = 0ns
Min Gnt = 0ns
PCI Int Pin = NC
Interrupt line = 0
Capabilities Pointer = 40h
Capability ID = 1h
Capabilities = 601h - 0h
Capability ID = 2h
Capabilities = 20h - f000207h

Thanx,
Andrew

qnx

Re: sis 900 network & sis 630 video and ...

Post by qnx » Fri Nov 21, 2003 11:32 pm

Hardware Support Account <hw@qnx.com> wrote:
Hi Andrew,

There is work being done to support the SiS 630
graphics, but it will not be ready for 6.1

There is support for the network chip is in 6.1.


Regards,

Joe
Hi Joe,
It's been a few years and several releases of QNX 6.
Do you know if Sis 630 graphics is now supported?
I saw one guy was asking http://www.openqnx.com/PNphpBB2-viewtopic-t1574-.html
and noticed your comments here.

Michael Van Reenen

Re: sis 900 network & sis 630 video and ...

Post by Michael Van Reenen » Mon Nov 24, 2003 1:02 pm

There will be a driver for the SiS630 graphics chipset
in our next release, 6.3.


qnx <qnx@inv.com.invalid> wrote:
Hardware Support Account <hw@qnx.com> wrote:
Hi Andrew,

There is work being done to support the SiS 630
graphics, but it will not be ready for 6.1

There is support for the network chip is in 6.1.


Regards,

Joe


Hi Joe,
It's been a few years and several releases of QNX 6.
Do you know if Sis 630 graphics is now supported?
I saw one guy was asking http://www.openqnx.com/PNphpBB2-viewtopic-t1574-.html
and noticed your comments here.

Post Reply

Return to “qdn.public.qnxrtp.installation”