Can't Boot/Install on a Dell Powerstation

bridged with qdn.public.qnxrtp.installation
Post Reply
Bill Caroselli

Can't Boot/Install on a Dell Powerstation

Post by Bill Caroselli » Wed Oct 01, 2003 3:24 pm

I have a Dell Powerstation 350. I'm trying to install QNX on to it.
I can't boot the CD. SO I built a boot floppy. But that won't boot
either.

In either case I get the:
"Hit <Esc> to boot alternate os:" followed by a bunch of dots
Finally I get a BIOS reset screen and the process starts all over
again.

I also tried the Alt OS (Non-DMA) on the CD. That didn't work either.
The floppy didn't seem to have an Alt OS.


What can I try next?

This system is a screemer (2.4GHz 1024MB RAM) and I'd really like to
use it.

I can build a custom OS on another system if there is anything I
should try.

Bill Caroselli

Re: Can't Boot/Install on a Dell Powerstation

Post by Bill Caroselli » Thu Oct 02, 2003 6:39 pm

Bill Caroselli <qtps@earthlink.net> wrote:
BC > I have a Dell Powerstation 350. I'm trying to install QNX on to it.
BC > I can't boot the CD. SO I built a boot floppy. But that won't boot
BC > either.

BC > In either case I get the:
BC > "Hit <Esc> to boot alternate os:" followed by a bunch of dots
BC > Finally I get a BIOS reset screen and the process starts all over
BC > again.

BC > I also tried the Alt OS (Non-DMA) on the CD. That didn't work either.
BC > The floppy didn't seem to have an Alt OS.


BC > What can I try next?

BC > This system is a screemer (2.4GHz 1024MB RAM) and I'd really like to
BC > use it.

BC > I can build a custom OS on another system if there is anything I
BC > should try.


I do want folks here to know that QSSL has helped with this problem.
There is a special bios.boot file that solves this problem.

THANKS QSSL!

Bill Caroselli

Next Step

Post by Bill Caroselli » Thu Oct 02, 2003 7:20 pm

Now that I have my screeming Dell booting QNX I have a new
problem. The best video mode that is supported is VESA.

Despite the speed of the processor, you can see it
painfully scrolling text lines in a pterm.



Below is the output from 'pci -v'.

=================


PCI version = 2.10

Class = Bridge (Host/PCI)
Vendor ID = 8086h, Intel Corporation
Device ID = 2530h, 82850 Host-Hub Interface Bridge
PCI index = 0h
Class Codes = 060000h
Revision ID = 4h
Bus number = 0
Device number = 0
Function num = 0
Status Reg = 2090h
Command Reg = 106h
Header type = 0h Single-function
BIST = 0h Build-in-self-test not supported
Latency Timer = 0h
Cache Line Size= 0h
Subsystem Vendor ID = 1028h
Subsystem ID = 144h
Max Lat = 0ns
Min Gnt = 0ns
PCI Int Pin = NC
Interrupt line = 0
Capabilities Pointer = a0h
Capability ID = 2h
Capabilities = 20h - 1f000217h

Class = Bridge (PCI/PCI)
Vendor ID = 8086h, Intel Corporation
Device ID = 2532h, 82850/82860 AGP Bridge
PCI index = 0h
Class Codes = 060400h
Revision ID = 4h
Bus number = 0
Device number = 1
Function num = 0
Status Reg = a0h
Command Reg = 107h
Header type = 1h Single-function
BIST = 0h Build-in-self-test not supported
Latency Timer = 40h
Cache Line Size= 0h
Primary Bus Number = 0h
Secondary Bus Number = 1h
Subordinate Bus Number = 1h
Secondary Latency Timer = 40h
I/O Base = f0h
I/O Limit = 0h
Secondary Status = 22a0h
Memory Base = fc00h
Memory Limit = fdf0h
Prefetchable Memory Base = f000h
Prefetchable Memory Limit= f7f0h
Prefetchable Base Upper 32 Bits = 0h
Prefetchable Limit Upper 32 Bits = 0h
I/O Base Upper 16 Bits = ffffh
I/O Limit Upper 16 Bits = ffffh
Bridge Control = 14ns
PCI Int Pin = NC
Interrupt line = 0

Class = Bridge (PCI/PCI)
Vendor ID = 8086h, Intel Corporation
Device ID = 244eh, 82801BA/CA Hub Interface to PCI Bridge
PCI index = 0h
Class Codes = 060400h
Revision ID = 4h
Bus number = 0
Device number = 30
Function num = 0
Status Reg = 80h
Command Reg = 107h
Header type = 1h Single-function
BIST = 0h Build-in-self-test not supported
Latency Timer = 0h
Cache Line Size= 0h
Primary Bus Number = 0h
Secondary Bus Number = 2h
Subordinate Bus Number = 2h
Secondary Latency Timer = 40h
I/O Base = e0h
I/O Limit = e0h
Secondary Status = 2280h
Memory Base = fe10h
Memory Limit = fe20h
Prefetchable Memory Base = fff0h
Prefetchable Memory Limit= 0h
Prefetchable Base Upper 32 Bits = 0h
Prefetchable Limit Upper 32 Bits = 0h
I/O Base Upper 16 Bits = ffffh
I/O Limit Upper 16 Bits = ffffh
Bridge Control = 6ns
PCI Int Pin = NC
Interrupt line = 0

Class = Bridge (PCI/ISA)
Vendor ID = 8086h, Intel Corporation
Device ID = 2440h, 82801BA LPC Interface Bridge, ICH2
PCI index = 0h
Class Codes = 060100h
Revision ID = 4h
Bus number = 0
Device number = 31
Function num = 0
Status Reg = 280h
Command Reg = fh
Header type = 0h Multi-function
BIST = 0h Build-in-self-test not supported
Latency Timer = 0h
Cache Line Size= 0h
Max Lat = 0ns
Min Gnt = 0ns
PCI Int Pin = NC
Interrupt line = 0

Class = Mass Storage (IDE)
Vendor ID = 8086h, Intel Corporation
Device ID = 244bh, 82801BA IDE Controller
PCI index = 0h
Class Codes = 010180h
Revision ID = 4h
Bus number = 0
Device number = 31
Function num = 1
Status Reg = 280h
Command Reg = 5h
Header type = 0h Single-function
BIST = 0h Build-in-self-test not supported
Latency Timer = 0h
Cache Line Size= 0h
PCI IO Address = ffa0h length 16 enabled
Subsystem Vendor ID = 1028h
Subsystem ID = 144h
Max Lat = 0ns
Min Gnt = 0ns
PCI Int Pin = NC
Interrupt line = 0

Class = Serial Bus (SMBus)
Vendor ID = 8086h, Intel Corporation
Device ID = 2443h, 82801BA/BAM SMBus Controller
PCI index = 0h
Class Codes = 0c0500h
Revision ID = 4h
Bus number = 0
Device number = 31
Function num = 3
Status Reg = 280h
Command Reg = 1h
Header type = 0h Single-function
BIST = 0h Build-in-self-test not supported
Latency Timer = 0h
Cache Line Size= 0h
PCI IO Address = dcf0h length 16 enabled
Subsystem Vendor ID = 1028h
Subsystem ID = 144h
Max Lat = 0ns
Min Gnt = 0ns
PCI Int Pin = INT B
Interrupt line = 11

Class = Multimedia (Audio)
Vendor ID = 8086h, Intel Corporation
Device ID = 2445h, 82801BA/BAM AC97 Audio Controller
PCI index = 0h
Class Codes = 040100h
Revision ID = 4h
Bus number = 0
Device number = 31
Function num = 5
Status Reg = 280h
Command Reg = 5h
Header type = 0h Single-function
BIST = 0h Build-in-self-test not supported
Latency Timer = 0h
Cache Line Size= 0h
PCI IO Address = d800h length 256 enabled
PCI IO Address = dc80h length 64 enabled
Subsystem Vendor ID = 1028h
Subsystem ID = 144h
Max Lat = 0ns
Min Gnt = 0ns
PCI Int Pin = INT B
Interrupt line = 11

Class = Display (VGA)
Vendor ID = 10deh, Nvidia Corporation
Device ID = 25bh, NV25GL Quadro4 700XGL
PCI index = 0h
Class Codes = 030000h
Revision ID = a3h
Bus number = 1
Device number = 0
Function num = 0
Status Reg = 2b0h
Command Reg = 6h
Header type = 0h Single-function
BIST = 0h Build-in-self-test not supported
Latency Timer = 40h
Cache Line Size= 0h
PCI Mem Address = fc000000h 32bit length 16777216 enabled
PCI Mem Address = f4000000h prefetchable 32bit length 67108864 enabled
PCI Mem Address = f3f80000h prefetchable 32bit length 524288 enabled
Subsystem Vendor ID = 10deh
Subsystem ID = 13bh
PCI Expansion ROM = 80000000h length 131072 disabled
Max Lat = 1ns
Min Gnt = 5ns
PCI Int Pin = INT A
Interrupt line = 9
Capabilities Pointer = 60h
Capability ID = 1h
Capabilities = 2h - 0h
Capability ID = 2h
Capabilities = 20h - 1f000217h

Class = Serial Bus (Universal Serial Bus)
Vendor ID = 1106h, VIA Technologies Inc
Device ID = 3038h, VT83C572 PCI USB Controller
PCI index = 0h
Class Codes = 0c0300h
Revision ID = 50h
Bus number = 2
Device number = 1
Function num = 0
Status Reg = 210h
Command Reg = 17h
Header type = 0h Multi-function
BIST = 0h Build-in-self-test not supported
Latency Timer = 40h
Cache Line Size= 10h un-cacheable
PCI IO Address = ece0h length 32 enabled
Subsystem Vendor ID = 925h
Subsystem ID = 1234h
Max Lat = 0ns
Min Gnt = 0ns
PCI Int Pin = INT A
Interrupt line = 10
Capabilities Pointer = 80h
Capability ID = 1h
Capabilities = c9c2h - 0h

Class = Serial Bus (Universal Serial Bus)
Vendor ID = 1106h, VIA Technologies Inc
Device ID = 3038h, VT83C572 PCI USB Controller
PCI index = 1h
Class Codes = 0c0300h
Revision ID = 50h
Bus number = 2
Device number = 1
Function num = 1
Status Reg = 210h
Command Reg = 17h
Header type = 0h Multi-function
BIST = 0h Build-in-self-test not supported
Latency Timer = 40h
Cache Line Size= 10h un-cacheable
PCI IO Address = ecc0h length 32 enabled
Subsystem Vendor ID = 925h
Subsystem ID = 1234h
Max Lat = 0ns
Min Gnt = 0ns
PCI Int Pin = INT B
Interrupt line = 11
Capabilities Pointer = 80h
Capability ID = 1h
Capabilities = c9c2h - 0h

Class = Serial Bus (Universal Serial Bus)
Vendor ID = 1106h, VIA Technologies Inc
Device ID = 3104h, VT6202 USB 2.0 Enhanced Host Controller
PCI index = 0h
Class Codes = 0c0320h
Revision ID = 51h
Bus number = 2
Device number = 1
Function num = 2
Status Reg = 210h
Command Reg = 17h
Header type = 0h Multi-function
BIST = 0h Build-in-self-test not supported
Latency Timer = 40h
Cache Line Size= 10h un-cacheable
PCI Mem Address = fe1ffc00h 32bit length 256 enabled
Subsystem Vendor ID = 925h
Subsystem ID = 1234h
Max Lat = 0ns
Min Gnt = 0ns
PCI Int Pin = INT C
Interrupt line = 9
Capabilities Pointer = 80h
Capability ID = 1h
Capabilities = c9c2h - 0h

Class = Serial Bus (Universal Serial Bus)
Vendor ID = 1106h, VIA Technologies Inc
Device ID = 3038h, VT83C572 PCI USB Controller
PCI index = 2h
Class Codes = 0c0300h
Revision ID = 50h
Bus number = 2
Device number = 2
Function num = 0
Status Reg = 210h
Command Reg = 17h
Header type = 0h Multi-function
BIST = 0h Build-in-self-test not supported
Latency Timer = 40h
Cache Line Size= 10h un-cacheable
PCI IO Address = eca0h length 32 enabled
Subsystem Vendor ID = 925h
Subsystem ID = 1234h
Max Lat = 0ns
Min Gnt = 0ns
PCI Int Pin = INT A
Interrupt line = 11
Capabilities Pointer = 80h
Capability ID = 1h
Capabilities = c9c2h - 0h

Class = Serial Bus (Universal Serial Bus)
Vendor ID = 1106h, VIA Technologies Inc
Device ID = 3038h, VT83C572 PCI USB Controller
PCI index = 3h
Class Codes = 0c0300h
Revision ID = 50h
Bus number = 2
Device number = 2
Function num = 1
Status Reg = 210h
Command Reg = 17h
Header type = 0h Multi-function
BIST = 0h Build-in-self-test not supported
Latency Timer = 40h
Cache Line Size= 10h un-cacheable
PCI IO Address = ec80h length 32 enabled
Subsystem Vendor ID = 925h
Subsystem ID = 1234h
Max Lat = 0ns
Min Gnt = 0ns
PCI Int Pin = INT B
Interrupt line = 11
Capabilities Pointer = 80h
Capability ID = 1h
Capabilities = c9c2h - 0h

Class = Serial Bus (Universal Serial Bus)
Vendor ID = 1106h, VIA Technologies Inc
Device ID = 3104h, VT6202 USB 2.0 Enhanced Host Controller
PCI index = 1h
Class Codes = 0c0320h
Revision ID = 51h
Bus number = 2
Device number = 2
Function num = 2
Status Reg = 210h
Command Reg = 17h
Header type = 0h Multi-function
BIST = 0h Build-in-self-test not supported
Latency Timer = 40h
Cache Line Size= 10h un-cacheable
PCI Mem Address = fe1ff800h 32bit length 256 enabled
Subsystem Vendor ID = 925h
Subsystem ID = 1234h
Max Lat = 0ns
Min Gnt = 0ns
PCI Int Pin = INT C
Interrupt line = 10
Capabilities Pointer = 80h
Capability ID = 1h
Capabilities = c9c2h - 0h

Class = Network (Ethernet)
Vendor ID = 8086h, Intel Corporation
Device ID = 100eh, Unknown Unknown
PCI index = 0h
Class Codes = 020000h
Revision ID = 2h
Bus number = 2
Device number = 12
Function num = 0
Status Reg = 230h
Command Reg = 117h
Header type = 0h Single-function
BIST = 0h Build-in-self-test not supported
Latency Timer = 40h
Cache Line Size= 10h un-cacheable
PCI Mem Address = fe1c0000h 32bit length 131072 enabled
PCI IO Address = ec40h length 64 enabled
Subsystem Vendor ID = 1028h
Subsystem ID = 144h
Max Lat = 0ns
Min Gnt = 255ns
PCI Int Pin = INT A
Interrupt line = 11
Capabilities Pointer = dch
Capability ID = 1h
Capabilities = 4822h - 1b002000h
Capability ID = 7h
Capabilities = 2h - 4400000h
Capability ID = 5h
Capabilities = 80h - 0h

Igor Kovalenko

Re: Next Step

Post by Igor Kovalenko » Fri Oct 03, 2003 4:46 am

No luck with Nvidia. And as things stand now, I doubt there will be a new
driver. Nvidia might go the way of Voodoo in a year, unless they have
something really good up their sleeve for the Christmas season sales.

Of course we could hope that there will be another webcast about porting
Linux drivers, this time using Nvidia video driver as a case study :)
-- igor

"Bill Caroselli" <qtps@earthlink.net> wrote in message
news:blhtp3$r5b$1@inn.qnx.com...
Now that I have my screeming Dell booting QNX I have a new
problem. The best video mode that is supported is VESA.

Despite the speed of the processor, you can see it
painfully scrolling text lines in a pterm.



Below is the output from 'pci -v'.

=================


PCI version = 2.10

Class = Bridge (Host/PCI)
Vendor ID = 8086h, Intel Corporation
Device ID = 2530h, 82850 Host-Hub Interface Bridge
PCI index = 0h
Class Codes = 060000h
Revision ID = 4h
Bus number = 0
Device number = 0
Function num = 0
Status Reg = 2090h
Command Reg = 106h
Header type = 0h Single-function
BIST = 0h Build-in-self-test not supported
Latency Timer = 0h
Cache Line Size= 0h
Subsystem Vendor ID = 1028h
Subsystem ID = 144h
Max Lat = 0ns
Min Gnt = 0ns
PCI Int Pin = NC
Interrupt line = 0
Capabilities Pointer = a0h
Capability ID = 2h
Capabilities = 20h - 1f000217h

Class = Bridge (PCI/PCI)
Vendor ID = 8086h, Intel Corporation
Device ID = 2532h, 82850/82860 AGP Bridge
PCI index = 0h
Class Codes = 060400h
Revision ID = 4h
Bus number = 0
Device number = 1
Function num = 0
Status Reg = a0h
Command Reg = 107h
Header type = 1h Single-function
BIST = 0h Build-in-self-test not supported
Latency Timer = 40h
Cache Line Size= 0h
Primary Bus Number = 0h
Secondary Bus Number = 1h
Subordinate Bus Number = 1h
Secondary Latency Timer = 40h
I/O Base = f0h
I/O Limit = 0h
Secondary Status = 22a0h
Memory Base = fc00h
Memory Limit = fdf0h
Prefetchable Memory Base = f000h
Prefetchable Memory Limit= f7f0h
Prefetchable Base Upper 32 Bits = 0h
Prefetchable Limit Upper 32 Bits = 0h
I/O Base Upper 16 Bits = ffffh
I/O Limit Upper 16 Bits = ffffh
Bridge Control = 14ns
PCI Int Pin = NC
Interrupt line = 0

Class = Bridge (PCI/PCI)
Vendor ID = 8086h, Intel Corporation
Device ID = 244eh, 82801BA/CA Hub Interface to PCI Bridge
PCI index = 0h
Class Codes = 060400h
Revision ID = 4h
Bus number = 0
Device number = 30
Function num = 0
Status Reg = 80h
Command Reg = 107h
Header type = 1h Single-function
BIST = 0h Build-in-self-test not supported
Latency Timer = 0h
Cache Line Size= 0h
Primary Bus Number = 0h
Secondary Bus Number = 2h
Subordinate Bus Number = 2h
Secondary Latency Timer = 40h
I/O Base = e0h
I/O Limit = e0h
Secondary Status = 2280h
Memory Base = fe10h
Memory Limit = fe20h
Prefetchable Memory Base = fff0h
Prefetchable Memory Limit= 0h
Prefetchable Base Upper 32 Bits = 0h
Prefetchable Limit Upper 32 Bits = 0h
I/O Base Upper 16 Bits = ffffh
I/O Limit Upper 16 Bits = ffffh
Bridge Control = 6ns
PCI Int Pin = NC
Interrupt line = 0

Class = Bridge (PCI/ISA)
Vendor ID = 8086h, Intel Corporation
Device ID = 2440h, 82801BA LPC Interface Bridge, ICH2
PCI index = 0h
Class Codes = 060100h
Revision ID = 4h
Bus number = 0
Device number = 31
Function num = 0
Status Reg = 280h
Command Reg = fh
Header type = 0h Multi-function
BIST = 0h Build-in-self-test not supported
Latency Timer = 0h
Cache Line Size= 0h
Max Lat = 0ns
Min Gnt = 0ns
PCI Int Pin = NC
Interrupt line = 0

Class = Mass Storage (IDE)
Vendor ID = 8086h, Intel Corporation
Device ID = 244bh, 82801BA IDE Controller
PCI index = 0h
Class Codes = 010180h
Revision ID = 4h
Bus number = 0
Device number = 31
Function num = 1
Status Reg = 280h
Command Reg = 5h
Header type = 0h Single-function
BIST = 0h Build-in-self-test not supported
Latency Timer = 0h
Cache Line Size= 0h
PCI IO Address = ffa0h length 16 enabled
Subsystem Vendor ID = 1028h
Subsystem ID = 144h
Max Lat = 0ns
Min Gnt = 0ns
PCI Int Pin = NC
Interrupt line = 0

Class = Serial Bus (SMBus)
Vendor ID = 8086h, Intel Corporation
Device ID = 2443h, 82801BA/BAM SMBus Controller
PCI index = 0h
Class Codes = 0c0500h
Revision ID = 4h
Bus number = 0
Device number = 31
Function num = 3
Status Reg = 280h
Command Reg = 1h
Header type = 0h Single-function
BIST = 0h Build-in-self-test not supported
Latency Timer = 0h
Cache Line Size= 0h
PCI IO Address = dcf0h length 16 enabled
Subsystem Vendor ID = 1028h
Subsystem ID = 144h
Max Lat = 0ns
Min Gnt = 0ns
PCI Int Pin = INT B
Interrupt line = 11

Class = Multimedia (Audio)
Vendor ID = 8086h, Intel Corporation
Device ID = 2445h, 82801BA/BAM AC97 Audio Controller
PCI index = 0h
Class Codes = 040100h
Revision ID = 4h
Bus number = 0
Device number = 31
Function num = 5
Status Reg = 280h
Command Reg = 5h
Header type = 0h Single-function
BIST = 0h Build-in-self-test not supported
Latency Timer = 0h
Cache Line Size= 0h
PCI IO Address = d800h length 256 enabled
PCI IO Address = dc80h length 64 enabled
Subsystem Vendor ID = 1028h
Subsystem ID = 144h
Max Lat = 0ns
Min Gnt = 0ns
PCI Int Pin = INT B
Interrupt line = 11

Class = Display (VGA)
Vendor ID = 10deh, Nvidia Corporation
Device ID = 25bh, NV25GL Quadro4 700XGL
PCI index = 0h
Class Codes = 030000h
Revision ID = a3h
Bus number = 1
Device number = 0
Function num = 0
Status Reg = 2b0h
Command Reg = 6h
Header type = 0h Single-function
BIST = 0h Build-in-self-test not supported
Latency Timer = 40h
Cache Line Size= 0h
PCI Mem Address = fc000000h 32bit length 16777216 enabled
PCI Mem Address = f4000000h prefetchable 32bit length 67108864 enabled
PCI Mem Address = f3f80000h prefetchable 32bit length 524288 enabled
Subsystem Vendor ID = 10deh
Subsystem ID = 13bh
PCI Expansion ROM = 80000000h length 131072 disabled
Max Lat = 1ns
Min Gnt = 5ns
PCI Int Pin = INT A
Interrupt line = 9
Capabilities Pointer = 60h
Capability ID = 1h
Capabilities = 2h - 0h
Capability ID = 2h
Capabilities = 20h - 1f000217h

Class = Serial Bus (Universal Serial Bus)
Vendor ID = 1106h, VIA Technologies Inc
Device ID = 3038h, VT83C572 PCI USB Controller
PCI index = 0h
Class Codes = 0c0300h
Revision ID = 50h
Bus number = 2
Device number = 1
Function num = 0
Status Reg = 210h
Command Reg = 17h
Header type = 0h Multi-function
BIST = 0h Build-in-self-test not supported
Latency Timer = 40h
Cache Line Size= 10h un-cacheable
PCI IO Address = ece0h length 32 enabled
Subsystem Vendor ID = 925h
Subsystem ID = 1234h
Max Lat = 0ns
Min Gnt = 0ns
PCI Int Pin = INT A
Interrupt line = 10
Capabilities Pointer = 80h
Capability ID = 1h
Capabilities = c9c2h - 0h

Class = Serial Bus (Universal Serial Bus)
Vendor ID = 1106h, VIA Technologies Inc
Device ID = 3038h, VT83C572 PCI USB Controller
PCI index = 1h
Class Codes = 0c0300h
Revision ID = 50h
Bus number = 2
Device number = 1
Function num = 1
Status Reg = 210h
Command Reg = 17h
Header type = 0h Multi-function
BIST = 0h Build-in-self-test not supported
Latency Timer = 40h
Cache Line Size= 10h un-cacheable
PCI IO Address = ecc0h length 32 enabled
Subsystem Vendor ID = 925h
Subsystem ID = 1234h
Max Lat = 0ns
Min Gnt = 0ns
PCI Int Pin = INT B
Interrupt line = 11
Capabilities Pointer = 80h
Capability ID = 1h
Capabilities = c9c2h - 0h

Class = Serial Bus (Universal Serial Bus)
Vendor ID = 1106h, VIA Technologies Inc
Device ID = 3104h, VT6202 USB 2.0 Enhanced Host Controller
PCI index = 0h
Class Codes = 0c0320h
Revision ID = 51h
Bus number = 2
Device number = 1
Function num = 2
Status Reg = 210h
Command Reg = 17h
Header type = 0h Multi-function
BIST = 0h Build-in-self-test not supported
Latency Timer = 40h
Cache Line Size= 10h un-cacheable
PCI Mem Address = fe1ffc00h 32bit length 256 enabled
Subsystem Vendor ID = 925h
Subsystem ID = 1234h
Max Lat = 0ns
Min Gnt = 0ns
PCI Int Pin = INT C
Interrupt line = 9
Capabilities Pointer = 80h
Capability ID = 1h
Capabilities = c9c2h - 0h

Class = Serial Bus (Universal Serial Bus)
Vendor ID = 1106h, VIA Technologies Inc
Device ID = 3038h, VT83C572 PCI USB Controller
PCI index = 2h
Class Codes = 0c0300h
Revision ID = 50h
Bus number = 2
Device number = 2
Function num = 0
Status Reg = 210h
Command Reg = 17h
Header type = 0h Multi-function
BIST = 0h Build-in-self-test not supported
Latency Timer = 40h
Cache Line Size= 10h un-cacheable
PCI IO Address = eca0h length 32 enabled
Subsystem Vendor ID = 925h
Subsystem ID = 1234h
Max Lat = 0ns
Min Gnt = 0ns
PCI Int Pin = INT A
Interrupt line = 11
Capabilities Pointer = 80h
Capability ID = 1h
Capabilities = c9c2h - 0h

Class = Serial Bus (Universal Serial Bus)
Vendor ID = 1106h, VIA Technologies Inc
Device ID = 3038h, VT83C572 PCI USB Controller
PCI index = 3h
Class Codes = 0c0300h
Revision ID = 50h
Bus number = 2
Device number = 2
Function num = 1
Status Reg = 210h
Command Reg = 17h
Header type = 0h Multi-function
BIST = 0h Build-in-self-test not supported
Latency Timer = 40h
Cache Line Size= 10h un-cacheable
PCI IO Address = ec80h length 32 enabled
Subsystem Vendor ID = 925h
Subsystem ID = 1234h
Max Lat = 0ns
Min Gnt = 0ns
PCI Int Pin = INT B
Interrupt line = 11
Capabilities Pointer = 80h
Capability ID = 1h
Capabilities = c9c2h - 0h

Class = Serial Bus (Universal Serial Bus)
Vendor ID = 1106h, VIA Technologies Inc
Device ID = 3104h, VT6202 USB 2.0 Enhanced Host Controller
PCI index = 1h
Class Codes = 0c0320h
Revision ID = 51h
Bus number = 2
Device number = 2
Function num = 2
Status Reg = 210h
Command Reg = 17h
Header type = 0h Multi-function
BIST = 0h Build-in-self-test not supported
Latency Timer = 40h
Cache Line Size= 10h un-cacheable
PCI Mem Address = fe1ff800h 32bit length 256 enabled
Subsystem Vendor ID = 925h
Subsystem ID = 1234h
Max Lat = 0ns
Min Gnt = 0ns
PCI Int Pin = INT C
Interrupt line = 10
Capabilities Pointer = 80h
Capability ID = 1h
Capabilities = c9c2h - 0h

Class = Network (Ethernet)
Vendor ID = 8086h, Intel Corporation
Device ID = 100eh, Unknown Unknown
PCI index = 0h
Class Codes = 020000h
Revision ID = 2h
Bus number = 2
Device number = 12
Function num = 0
Status Reg = 230h
Command Reg = 117h
Header type = 0h Single-function
BIST = 0h Build-in-self-test not supported
Latency Timer = 40h
Cache Line Size= 10h un-cacheable
PCI Mem Address = fe1c0000h 32bit length 131072 enabled
PCI IO Address = ec40h length 64 enabled
Subsystem Vendor ID = 1028h
Subsystem ID = 144h
Max Lat = 0ns
Min Gnt = 255ns
PCI Int Pin = INT A
Interrupt line = 11
Capabilities Pointer = dch
Capability ID = 1h
Capabilities = 4822h - 1b002000h
Capability ID = 7h
Capabilities = 2h - 4400000h
Capability ID = 5h
Capabilities = 80h - 0h

David Donohoe

Re: Next Step

Post by David Donohoe » Fri Oct 03, 2003 4:57 pm

Bill Caroselli <qtps@earthlink.net> wrote:
Now that I have my screeming Dell booting QNX I have a new
problem. The best video mode that is supported is VESA.

Despite the speed of the processor, you can see it
painfully scrolling text lines in a pterm.
Try running the SVGA driver instead. The will actually be slower
for many rendering operations, but thing like blitting will be
much faster, hence the pterm scrolling should be less painful.

Of course the real solution would be to have an accelerated driver
available for newer nVidia chips. This depends one one of the
following things happening:

1. We update our "tnt" driver with newer source from nVidia, which they
provide as part of the standard XFree distribution. However,
success is not guaranteed with this approach, since we don't
have any chip docs, and could hit a brick wall if the ported
source doesn't "just work".
2. nVidia provide use with docs, and we write a brand new driver.
3. nVidia writes a driver, and makes it available.
4. A third party creates a new driver, using our graphics DDK, and
the source from the XFree distribution.

1) is unlikely to happen for some time, as sales and management
have deemed other projects to be of higher priority, and the
development resources are not available at this time. I would
consider working some extra hours to update the driver, but I'd be
pretty foolish to invest my time this way, since the most I could
expect to get in return is obnoxious, sneering, insulting comments
from certain "enthusiasts".

As for 2) and 3), I've no idea, but I have reason to believe that
3) is more likely to happen than 2).

So if anyone's up for it, option 4) is open...

Dave
Below is the output from 'pci -v'.

=================
PCI version = 2.10

Class = Bridge (Host/PCI)
Vendor ID = 8086h, Intel Corporation
Device ID = 2530h, 82850 Host-Hub Interface Bridge
PCI index = 0h
Class Codes = 060000h
Revision ID = 4h
Bus number = 0
Device number = 0
Function num = 0
Status Reg = 2090h
Command Reg = 106h
Header type = 0h Single-function
BIST = 0h Build-in-self-test not supported
Latency Timer = 0h
Cache Line Size= 0h
Subsystem Vendor ID = 1028h
Subsystem ID = 144h
Max Lat = 0ns
Min Gnt = 0ns
PCI Int Pin = NC
Interrupt line = 0
Capabilities Pointer = a0h
Capability ID = 2h
Capabilities = 20h - 1f000217h

Class = Bridge (PCI/PCI)
Vendor ID = 8086h, Intel Corporation
Device ID = 2532h, 82850/82860 AGP Bridge
PCI index = 0h
Class Codes = 060400h
Revision ID = 4h
Bus number = 0
Device number = 1
Function num = 0
Status Reg = a0h
Command Reg = 107h
Header type = 1h Single-function
BIST = 0h Build-in-self-test not supported
Latency Timer = 40h
Cache Line Size= 0h
Primary Bus Number = 0h
Secondary Bus Number = 1h
Subordinate Bus Number = 1h
Secondary Latency Timer = 40h
I/O Base = f0h
I/O Limit = 0h
Secondary Status = 22a0h
Memory Base = fc00h
Memory Limit = fdf0h
Prefetchable Memory Base = f000h
Prefetchable Memory Limit= f7f0h
Prefetchable Base Upper 32 Bits = 0h
Prefetchable Limit Upper 32 Bits = 0h
I/O Base Upper 16 Bits = ffffh
I/O Limit Upper 16 Bits = ffffh
Bridge Control = 14ns
PCI Int Pin = NC
Interrupt line = 0

Class = Bridge (PCI/PCI)
Vendor ID = 8086h, Intel Corporation
Device ID = 244eh, 82801BA/CA Hub Interface to PCI Bridge
PCI index = 0h
Class Codes = 060400h
Revision ID = 4h
Bus number = 0
Device number = 30
Function num = 0
Status Reg = 80h
Command Reg = 107h
Header type = 1h Single-function
BIST = 0h Build-in-self-test not supported
Latency Timer = 0h
Cache Line Size= 0h
Primary Bus Number = 0h
Secondary Bus Number = 2h
Subordinate Bus Number = 2h
Secondary Latency Timer = 40h
I/O Base = e0h
I/O Limit = e0h
Secondary Status = 2280h
Memory Base = fe10h
Memory Limit = fe20h
Prefetchable Memory Base = fff0h
Prefetchable Memory Limit= 0h
Prefetchable Base Upper 32 Bits = 0h
Prefetchable Limit Upper 32 Bits = 0h
I/O Base Upper 16 Bits = ffffh
I/O Limit Upper 16 Bits = ffffh
Bridge Control = 6ns
PCI Int Pin = NC
Interrupt line = 0

Class = Bridge (PCI/ISA)
Vendor ID = 8086h, Intel Corporation
Device ID = 2440h, 82801BA LPC Interface Bridge, ICH2
PCI index = 0h
Class Codes = 060100h
Revision ID = 4h
Bus number = 0
Device number = 31
Function num = 0
Status Reg = 280h
Command Reg = fh
Header type = 0h Multi-function
BIST = 0h Build-in-self-test not supported
Latency Timer = 0h
Cache Line Size= 0h
Max Lat = 0ns
Min Gnt = 0ns
PCI Int Pin = NC
Interrupt line = 0

Class = Mass Storage (IDE)
Vendor ID = 8086h, Intel Corporation
Device ID = 244bh, 82801BA IDE Controller
PCI index = 0h
Class Codes = 010180h
Revision ID = 4h
Bus number = 0
Device number = 31
Function num = 1
Status Reg = 280h
Command Reg = 5h
Header type = 0h Single-function
BIST = 0h Build-in-self-test not supported
Latency Timer = 0h
Cache Line Size= 0h
PCI IO Address = ffa0h length 16 enabled
Subsystem Vendor ID = 1028h
Subsystem ID = 144h
Max Lat = 0ns
Min Gnt = 0ns
PCI Int Pin = NC
Interrupt line = 0

Class = Serial Bus (SMBus)
Vendor ID = 8086h, Intel Corporation
Device ID = 2443h, 82801BA/BAM SMBus Controller
PCI index = 0h
Class Codes = 0c0500h
Revision ID = 4h
Bus number = 0
Device number = 31
Function num = 3
Status Reg = 280h
Command Reg = 1h
Header type = 0h Single-function
BIST = 0h Build-in-self-test not supported
Latency Timer = 0h
Cache Line Size= 0h
PCI IO Address = dcf0h length 16 enabled
Subsystem Vendor ID = 1028h
Subsystem ID = 144h
Max Lat = 0ns
Min Gnt = 0ns
PCI Int Pin = INT B
Interrupt line = 11

Class = Multimedia (Audio)
Vendor ID = 8086h, Intel Corporation
Device ID = 2445h, 82801BA/BAM AC97 Audio Controller
PCI index = 0h
Class Codes = 040100h
Revision ID = 4h
Bus number = 0
Device number = 31
Function num = 5
Status Reg = 280h
Command Reg = 5h
Header type = 0h Single-function
BIST = 0h Build-in-self-test not supported
Latency Timer = 0h
Cache Line Size= 0h
PCI IO Address = d800h length 256 enabled
PCI IO Address = dc80h length 64 enabled
Subsystem Vendor ID = 1028h
Subsystem ID = 144h
Max Lat = 0ns
Min Gnt = 0ns
PCI Int Pin = INT B
Interrupt line = 11

Class = Display (VGA)
Vendor ID = 10deh, Nvidia Corporation
Device ID = 25bh, NV25GL Quadro4 700XGL
PCI index = 0h
Class Codes = 030000h
Revision ID = a3h
Bus number = 1
Device number = 0
Function num = 0
Status Reg = 2b0h
Command Reg = 6h
Header type = 0h Single-function
BIST = 0h Build-in-self-test not supported
Latency Timer = 40h
Cache Line Size= 0h
PCI Mem Address = fc000000h 32bit length 16777216 enabled
PCI Mem Address = f4000000h prefetchable 32bit length 67108864 enabled
PCI Mem Address = f3f80000h prefetchable 32bit length 524288 enabled
Subsystem Vendor ID = 10deh
Subsystem ID = 13bh
PCI Expansion ROM = 80000000h length 131072 disabled
Max Lat = 1ns
Min Gnt = 5ns
PCI Int Pin = INT A
Interrupt line = 9
Capabilities Pointer = 60h
Capability ID = 1h
Capabilities = 2h - 0h
Capability ID = 2h
Capabilities = 20h - 1f000217h

Class = Serial Bus (Universal Serial Bus)
Vendor ID = 1106h, VIA Technologies Inc
Device ID = 3038h, VT83C572 PCI USB Controller
PCI index = 0h
Class Codes = 0c0300h
Revision ID = 50h
Bus number = 2
Device number = 1
Function num = 0
Status Reg = 210h
Command Reg = 17h
Header type = 0h Multi-function
BIST = 0h Build-in-self-test not supported
Latency Timer = 40h
Cache Line Size= 10h un-cacheable
PCI IO Address = ece0h length 32 enabled
Subsystem Vendor ID = 925h
Subsystem ID = 1234h
Max Lat = 0ns
Min Gnt = 0ns
PCI Int Pin = INT A
Interrupt line = 10
Capabilities Pointer = 80h
Capability ID = 1h
Capabilities = c9c2h - 0h

Class = Serial Bus (Universal Serial Bus)
Vendor ID = 1106h, VIA Technologies Inc
Device ID = 3038h, VT83C572 PCI USB Controller
PCI index = 1h
Class Codes = 0c0300h
Revision ID = 50h
Bus number = 2
Device number = 1
Function num = 1
Status Reg = 210h
Command Reg = 17h
Header type = 0h Multi-function
BIST = 0h Build-in-self-test not supported
Latency Timer = 40h
Cache Line Size= 10h un-cacheable
PCI IO Address = ecc0h length 32 enabled
Subsystem Vendor ID = 925h
Subsystem ID = 1234h
Max Lat = 0ns
Min Gnt = 0ns
PCI Int Pin = INT B
Interrupt line = 11
Capabilities Pointer = 80h
Capability ID = 1h
Capabilities = c9c2h - 0h

Class = Serial Bus (Universal Serial Bus)
Vendor ID = 1106h, VIA Technologies Inc
Device ID = 3104h, VT6202 USB 2.0 Enhanced Host Controller
PCI index = 0h
Class Codes = 0c0320h
Revision ID = 51h
Bus number = 2
Device number = 1
Function num = 2
Status Reg = 210h
Command Reg = 17h
Header type = 0h Multi-function
BIST = 0h Build-in-self-test not supported
Latency Timer = 40h
Cache Line Size= 10h un-cacheable
PCI Mem Address = fe1ffc00h 32bit length 256 enabled
Subsystem Vendor ID = 925h
Subsystem ID = 1234h
Max Lat = 0ns
Min Gnt = 0ns
PCI Int Pin = INT C
Interrupt line = 9
Capabilities Pointer = 80h
Capability ID = 1h
Capabilities = c9c2h - 0h

Class = Serial Bus (Universal Serial Bus)
Vendor ID = 1106h, VIA Technologies Inc
Device ID = 3038h, VT83C572 PCI USB Controller
PCI index = 2h
Class Codes = 0c0300h
Revision ID = 50h
Bus number = 2
Device number = 2
Function num = 0
Status Reg = 210h
Command Reg = 17h
Header type = 0h Multi-function
BIST = 0h Build-in-self-test not supported
Latency Timer = 40h
Cache Line Size= 10h un-cacheable
PCI IO Address = eca0h length 32 enabled
Subsystem Vendor ID = 925h
Subsystem ID = 1234h
Max Lat = 0ns
Min Gnt = 0ns
PCI Int Pin = INT A
Interrupt line = 11
Capabilities Pointer = 80h
Capability ID = 1h
Capabilities = c9c2h - 0h

Class = Serial Bus (Universal Serial Bus)
Vendor ID = 1106h, VIA Technologies Inc
Device ID = 3038h, VT83C572 PCI USB Controller
PCI index = 3h
Class Codes = 0c0300h
Revision ID = 50h
Bus number = 2
Device number = 2
Function num = 1
Status Reg = 210h
Command Reg = 17h
Header type = 0h Multi-function
BIST = 0h Build-in-self-test not supported
Latency Timer = 40h
Cache Line Size= 10h un-cacheable
PCI IO Address = ec80h length 32 enabled
Subsystem Vendor ID = 925h
Subsystem ID = 1234h
Max Lat = 0ns
Min Gnt = 0ns
PCI Int Pin = INT B
Interrupt line = 11
Capabilities Pointer = 80h
Capability ID = 1h
Capabilities = c9c2h - 0h

Class = Serial Bus (Universal Serial Bus)
Vendor ID = 1106h, VIA Technologies Inc
Device ID = 3104h, VT6202 USB 2.0 Enhanced Host Controller
PCI index = 1h
Class Codes = 0c0320h
Revision ID = 51h
Bus number = 2
Device number = 2
Function num = 2
Status Reg = 210h
Command Reg = 17h
Header type = 0h Multi-function
BIST = 0h Build-in-self-test not supported
Latency Timer = 40h
Cache Line Size= 10h un-cacheable
PCI Mem Address = fe1ff800h 32bit length 256 enabled
Subsystem Vendor ID = 925h
Subsystem ID = 1234h
Max Lat = 0ns
Min Gnt = 0ns
PCI Int Pin = INT C
Interrupt line = 10
Capabilities Pointer = 80h
Capability ID = 1h
Capabilities = c9c2h - 0h

Class = Network (Ethernet)
Vendor ID = 8086h, Intel Corporation
Device ID = 100eh, Unknown Unknown
PCI index = 0h
Class Codes = 020000h
Revision ID = 2h
Bus number = 2
Device number = 12
Function num = 0
Status Reg = 230h
Command Reg = 117h
Header type = 0h Single-function
BIST = 0h Build-in-self-test not supported
Latency Timer = 40h
Cache Line Size= 10h un-cacheable
PCI Mem Address = fe1c0000h 32bit length 131072 enabled
PCI IO Address = ec40h length 64 enabled
Subsystem Vendor ID = 1028h
Subsystem ID = 144h
Max Lat = 0ns
Min Gnt = 255ns
PCI Int Pin = INT A
Interrupt line = 11
Capabilities Pointer = dch
Capability ID = 1h
Capabilities = 4822h - 1b002000h
Capability ID = 7h
Capabilities = 2h - 4400000h
Capability ID = 5h
Capabilities = 80h - 0h

Bill Caroselli

Package question

Post by Bill Caroselli » Fri Oct 03, 2003 5:44 pm

On this system I have installed several products from the 3rd products
CD. Most of them I don't need, they just sounded interesting.

Now when I boot this system I get a message during startup of the
package filesystem that says:
Warning: Can't find package [phbear/phhotkey_/core-0.5/MANIFEST]

This system is running 6.2.1B. The 3rd party CD is from 6.2.0
(I think).

What can I do to fix this?

If nothing, what can I do to uninstall the bad item?


BTW, I do want to say thanks you to QNX and the QNX community. In the
last few weks I have done some very impressive things on hardware that
I've never played with before. And most of it we got working with a
minimum amout of help from you.

Thanks.

Post Reply

Return to “qdn.public.qnxrtp.installation”