CompactFlash problem

bridged with qdn.public.qnx2
Post Reply
Tdolata

CompactFlash problem

Post by Tdolata » Mon Sep 08, 2003 12:02 pm

I want to connect a CompactFlash card through IDE interface. I have a error
like this:

io-blk: IO read (/dev/hd0) blks 0...0
simq_timer: building abort ccb
ata_start_ccb: func 10
ata_ccb_abort: calling ata_error
ATA error (path=0, device=0 cam_status=11 scsi_status=0, status=58, error=0,
cmd
=28

with a command: "devb-eide disk verbose blk
cache=256k,verbose,bufsz=512:512,nora,noaiod eide
cmd640,slave,nopci,pio,verbose,ioport=0x1200:0x1240,stride=2,irq=7".
I have QNX 2.21 and run on 386ex with a 16MB SunDisk CompactFlash. A port
address, as you see, are 1200:1240, irq=7. When I read or write a IDE port
by myself evrything are OK. Can anybody help me. Thanks.

Mario Charest

Re: CompactFlash problem

Post by Mario Charest » Mon Sep 08, 2003 12:03 pm

"Tdolata" <tdolata@et.put.poznan.pl> wrote in message
news:bjhq67$8dm$1@inn.qnx.com...
I want to connect a CompactFlash card through IDE interface. I have a
error
like this:

io-blk: IO read (/dev/hd0) blks 0...0
simq_timer: building abort ccb
ata_start_ccb: func 10
ata_ccb_abort: calling ata_error
ATA error (path=0, device=0 cam_status=11 scsi_status=0, status=58,
error=0,
cmd
=28

with a command: "devb-eide disk verbose blk
cache=256k,verbose,bufsz=512:512,nora,noaiod eide
cmd640,slave,nopci,pio,verbose,ioport=0x1200:0x1240,stride=2,irq=7".

I have QNX 2.21
That would be Neutrino 2.21 which correspond to QNX Version 6. Try posting
in qdb.public.neutrino or installation to increase your chances pf getting
an answer
386ex with a 16MB SunDisk CompactFlash. A port
address, as you see, are 1200:1240, irq=7. When I read or write a IDE port
by myself evrything are OK. Can anybody help me. Thanks.

Post Reply

Return to “qdn.public.qnx2”